WEBENCH® Tools/CC2530: about ZStack 3.0 Green Power interface

Sean221

Part Number: CC2530
Other Parts Discussed in Thread: CC1352P, CC1352R, CC2652R, , CC2531, Z-STACK, CC2538

Tool/software: WEBENCH® Design Tools

Hi experts,

The samples in ZStack 3.0 use bdb APIs for commission and data r/w process. How to use green power APIs to do these? Is there any samples of green power application?

For example, in ZStack 3.0, SampleThermalStat use bdb_StartCommissioning() to start the commission, but for green power, there is GP_ProccessCommissioningNotification() in gp_common.h. How to change all the commission and data collecting process to green power method?

Thanks.

over 6 years ago

0 YiKai Chen over 6 years ago

Guru 735685 points

As I know, TI only provides GP examples on CC2652R, CC1352R, and CC1352P SOC.

0 Ryan Brown1 over 6 years ago

TI__Guru**** 217467 points

Hi Sean,

Z-Stack 3.0.x for the CC2530/CC2531/CC2538 supports Green Power Proxying as required by the Zigbee 3.0 Specification. However this is no direct support for Green Power Devices (GPD) or Green Power Sink (GPS) applications.

Z-Stack 3.x.0 for the CC2652R/CC1352R/CC1352P, as provided in the SimpleLink SDK, provides examples for GPDs and GPS applications: dev.ti.com/.../gpd_application_overview.html

A porting effort would be required to migrate the functionality provided in Z-Stack 3.x.0 to 3.0.x

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

WEBENCH® Tools/CC2530: about ZStack 3.0 Green Power interface