Compiler/CC2538: Use IAR IDE can not update the firmware.

Make sure you select "TI XDS100v3 USB Emulator" as debugger in your project options.

Hi YiKai Chen

Yes,it is set it you describe,But I found a strange question:But the clean zstack GenericApp project is can update firmware into it. other projects can not update it.

And open other project had this,see the picture.

Thanks!

If you try to use "Specify custom board file", does it work?

Hi YiKai Chen

Had no.Why had NULINK_ID?

You can try to specify CC2538_XDS100v3_CJTAG.dat or CC2538_XDS100v3_JTAG.dat under C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.0\arm\config\debugger\TexasInstruments\xds

Hi YiKai Chen

It is OK,But this had any problem?

See this picture.

It seems flash verify failure. Do you modify anything on your SampleDoorLock example?

No,I just build and update it ,

Use specify CC2538_XDS100v3_CJTAG.dat or CC2538_XDS100v3_JTAG.dat  or specify CC2538_XDS100v3_CJTAG.dat or CC2538_XDS100v3_cJTAG.dat

had a same result.

But I build a GenericApp project,  It had not set any settings,it can update firmware.

Thanks!

Which Z-Stack version do you use?

Hi YiKai Chen

Z-Stack 3.0.2,just GenericApp project had not set,other must be set what you said it.

Thanks!

Hi,YiKan Chen

Does it matter?Why only the Genericpp project had no this problem？

I use the Genericpp project develop Coordinator.

I want to use a clean develop ota.so I found this problem.

Thanks!

I don’t know if it matters but when I use matched IAR version, I don’t see the same problem.

OK,Thanks！I will try it.

Hi YiKai Chen

flash verify failure this issue can be normal work?

Or  I should update the IAR version   8.22.1?

Thanks!

I think you should update the IAR version   8.22.1.

Hi YiKai Chen

OK,I had update the IAR version on 8.22.1.

Thanks!

Hi YiKai Chen

I had not found this issue,

Thanks!

Hi YiKai Chen

I update the ota project,appear the same phenomenon,Please the picture.

Thanks!

Yes, I can see the same warning on my IAR. But the application seems work so you can just test it.

Hi YiKai Chen

This project had no warning.only with bootloader project had it.

Thanks！

ImageB is for OTA so it won't have that warning. Those warning only happen when you download IMAGE with bootloader.

Hi YiKai Chen

OK,I see,I will try to had a better way to solve it.

Thanks!

Hi YiKai Chen

I want to use a zstack3.0.2 for CC2530 SampleSwitch build a ota[want to have a Guideline], but after bulid appear error,please check the pircture.

Thanks!

You can try to refer to Z-Stack OTA Upgrade User's Guide.pdf in Z-Stack document folder first.

Hi YiKai Chen

Yes,I has been refer to the PDF[Z-Stack OTA Upgrade User's Guide] before consult to you.

Thanks!

There is something wrong in your post build command. How do you get this OTA project?

Hi YiKai Chen

Just unzip the zstack3.0.2, and open the D:\Texas Instruments\Z-Stack 3.0.2\Projects\zstack\HomeAutomation\SampleSwitch\CC2530DB.

and follow the PDF[[Z-Stack OTA Upgrade User's Guide]],seem that the project had not modify,and just build it.

Thanks!

unzip the zstack3.0.2? I remember TI provide install package. Do you download Z-Stack from TI web site? I test the original SampleSwitch on my desktop and I don't see similar build issue.

Hi,YiKai Chen

Yes, I wrong expression,use a  install package.what you test SampleSwitch on CC2530 or CC2538?

Now I has two issue: 1.SampleSwitch on CC2530 had build issue.

                                    other project had no this issue. 

                                    IAR for 8051 10.20.1 and CC Debugger.

                                   2.SampleSwitch on CC2538 build a ota with bootloader had a flash verify error issue.other project had no this issue.

                                    IAR for arm 8.22.1

Thanks!

I build SampleSwitch on both of CC2530 and CC2538, and I don't see such issue.

Hi Yikai Chen

Yesterday you said build on CC2538 SampleSwitch End-Device OTA-client Image-A with bootloader had a same warning.

Thank!

Yes, I said I see the same warning but I also said application seems work.

Hi YiKai Chen

Ok,I will use it to next work on CC2538.

But Why the CC2530 had this bulid error,very very very puzzled.

Thanks!

You haven't reply my previous question "Do you download Z-Stack from TI web site?"

Hi YiKai Chen

yes.use this.Previously downloaded.

Thanks!

Try to install your Z-Stack to default folder C:\Texas Instruments to test again.

Hi YiKai Chen 

Please see this,

Thanks!

Hi Yikai Chen

OK,I had tried more several times on the CC2530,it seem that it had no this issue,So strange?

Thanks!

Anyway, it's good to know the issue is disappeared.