This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2538DK: with Raspberry

Part Number: CC2538DK
Other Parts Discussed in Thread: TIMAC, Z-STACK

Hi Team,

Our customer is looking to connect CC2538DK  with Raspberry pi. Shes planning to use it for planning on using it for trilateration. So she'd need a star network of five nodes in total.

I saw a post below that mentioned this should be possible and that she can program the CC2538DK using a serial bootloader. How can she access the bootloader on the hardware side?

Ideally, she would like to connect the board to a microcontroller for further processing.

Thanks in advance!


  • Hi Art,

    You can refer to SWRA466 (the link provided by YK is broken as it points to an old App Report version).

    If you are interested in the 15.4-Stack then please refer to TIMAC and the Co-processor project and documentation.  Regarding Zigbee it would be Z-Stack 3.0.2 for the ZNP.