CC2538: How to send costum commands to CC2538 ZNP device using ZNP-Host-Fraamework Application.

As I know, dataSendRcv example in ZNP-Host-Framework demonstrates such capability.

Hello YiKai Chen,

Will you please elaborate on your answer to understand this.

Also, I would like to know some more...

Is it possible to define custom commands related to the specific cluster or not?

For Example,

On-Off cluster supports only 3 Commands, which are On, Off & Toggle.

Can we define any custom command to do some functionality & its related attribute to get its current status?

Will TI's OR Zigbee standards recommend this?

Regards,

Shiv Patil.

If you study dataSendRcv example in ZNP-Host-Framework demonstrates, you will see it uses afDataRequest to send raw data. Basically, I would recommend to define custom command based on ZCL spec.

Thanks YiKai Chen,

Will you please help me to know,

Can I also define a custom cluster with specific functionality

And related to its functionality custom commands & attributes.

Regards,

Shiv Patil.

Thank you Toby Pan & YiKai Chen,

I would also like to know, 

Is it possible that sending multiple commands in a frame over a Zigbee network?

Example,

For a color generation, We need 3 values which are Level Hue & sat.

But as per the Zigbee standards, level & color clusters have their different functionality.

Can I send a custom command that will send all these 3 values in a single frame to a device
&
the device will perform the same functionality as they do individually (level & color) & respond in a single frame?

Regards, 
Shiv Patil.