CC2652R: SAPI interface on ZStack 3.5.0

Antonio Portaluri

Part Number: CC2652R
Other Parts Discussed in Thread: Z-STACK

Hi to all.

I'm reading the TI Z-Stack 3.5.0 Release Notes on software-dl.ti.com/.../release_notes_zigbee_3_5_0.html

The document Z-Stack Monitor and Test API report the support to the MT_SAPI interface (3.7). But the new ZNP downloadew from your website seems to NOT include this layer.

Is it a document issue? Do I have to change all MT_SAPI request of my software to support the new ZNP?

Thanks,
Antonio

over 3 years ago

0 YiKai Chen over 3 years ago

Guru 735455 points

According to Ryan's reply in this thread,MT SAPI functionality was discontinued for the SIMPLELINK-CC13X2-26X2-SDK and is not available.

0 Antonio Portaluri over 3 years ago in reply to YiKai Chen

Intellectual 260 points

Thank you for the response.

So there is an updated documentation with this changes?

Antonio

0 YiKai Chen over 3 years ago in reply to Antonio Portaluri

Guru 735455 points

Yes, I agree with you that TI should update the document accordingly to avoid confusion.

0 Ryan Brown1 over 3 years ago in reply to YiKai Chen

TI__Guru**** 202216 points

Hi Antonio & YK,

This is good feedback that I've noticed recently as well and will make sure it is removed in the next SDK release.

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

CC2652R: SAPI interface on ZStack 3.5.0