• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 55 subscribers
  • Views 264 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-CC2652RB: pairing with BOOSTXL-ULPSENSE?

Bart
Expert 6360 points
Part Number: LP-CC2652RB
Other Parts Discussed in Thread: BOOSTXL-ULPSENSE, CC2652RB, CC2652R, SENSOR-CONTROLLER-STUDIO, SIMPLELINK-CC13X2-26X2-SDK,

Hello,

does the CC2652RB support the sensor controller booster pack (BOOSTXL-ULPSENSE)?

The CC2652R is mentioned as supported, but it's not the case for CC2652RB (BAW).

  • 0
    TI__Guru**** 206997 points

    Hello Bart,

    The BOOSTXL-ULPSENSE is compatible with any SIMPLELINK-CC13X2-26X2-SDK SoC/LP, including the LP-CC2652RB.  The resource you are referring to was most likely created before the device/LaunchPad was released but the pinouts are the exact same and the sensors can be entirely configured from SENSOR-CONTROLLER-STUDIO.  Please reference the Sensor Controller Studio SLAs to get started.

    Regards,
    Ryan