CC1352P: How to rejoin the network after ZC factory reset

dAVID

Intellectual 790 points

Part Number: CC1352P

Hi Ryan and YiKai

There were 6 ZRs ZigBee network work perfect. ZC was hard to rejoin the network after ZC factory reset.

It looks like 6WIO still in the network.

ZC can build a fresh network after all ZRs factory reset.

Best regards,

David

over 5 years ago

+1 YiKai Chen over 5 years ago

Guru 735695 points

I suppose you have to clone ZC according to https://www.ti.com/lit/an/swra671/swra671.pdf before you do factory reset to coordinator. You can recover it with clone data otherwise ZC cannot join back previous network.

0 Ryan Brown1 over 5 years ago

TI__Guru**** 222767 points

Hi David,

YK has the correct response, the ZC will be unable to rejoin the previous network (which it formed) since keys and network information were erased with the factory reset.

Regards,
Ryan

0 dAVID over 5 years ago in reply to Ryan Brown1

Intellectual 790 points

Hi YiKai and Ryan,

Very appreciated your great help.

Best regards,

David

Zigbee & Thread

Zigbee & Thread forum

CC1352P: How to rejoin the network after ZC factory reset