CC2640R2F: BLE MESH

CCphi CCsora

Part Number: CC2640R2F
Other Parts Discussed in Thread: BLE-STACK, , CC2640

BLE-Stack 3.0 for CC2640R2F, Does it support BLE Mesh ? If this stack not support , when will TI have new stack to support BLE Mesh ?

We found that NXP KW41Z BLE stack already support BLE Smart Mesh.

community.nxp.com/.../858868

over 8 years ago

0 Sean2 over 8 years ago

TI__Mastermind 33460 points

Hello,

BLE Stack 3.0 does not support mesh, but this is something we are looking into.

0 JXS over 8 years ago

TI__Guru** 105180 points

Hi,

In addition, CC2640R2F is BT5 HW ready and will be receiving protocol stack software updates to support BT5 2 Mbps and Long Range mode in the first half of 2017. BT Smart Mesh has not been adopted but as Sean2 indicates, we are following this standard. In the meantime, you may be able to use BT5 features to supplement the need for mesh.

More details are on the pinned CC2640/CC2640R2F FAQ post at the top of the BLE forum.

Best wishes

0 Shyam Prakash Munnaluri over 8 years ago in reply to JXS

Prodigy 20 points

Hi TI team,

Now that Bluetooth SIG has officially released BLE mesh standard, I would like to know below:
1. When would be the BLE mesh stack available from TI?
2. Which BLE module from TI is best suited for mesh support in terms of FLASH size, RAM etc?

Thank you!

0 Kummi over 8 years ago in reply to Shyam Prakash Munnaluri

Mastermind 6220 points

Any updates on the BLE Mesh stack?

Bluetooth®︎

Bluetooth forum

CC2640R2F: BLE MESH