CC2650MODA: Moisture Sensitivity Level rating and reflow solder temperature profile

Hi Charles,

I have reached out to the hardware team for this information. You should get a response shortly.

Chips,
Is it also possible find out the below information on the module:
In the final product the module is going to be placed into a plastic housing.
1. What are the module’s requirements for clearance from plastics?
2. Was it designed for certain plastics, proximities, dielectric constants etc.?
3. What approach would you recommend when integrating the module into a housing to minimize RF degradation? Since, we cannot tune the antenna.

Thanks,
Charles

Hi Charles,

We do not have any guidance on that, even though they are valid concerns. Generally, try to achieve maximum clearance between the antenna and housing, battery, etc. That being said, the module is made to be robust against detuning.

Regards,
Fredrik