CCS/LAUNCHXL-CC1350: Required projects of Project Zero

user5033405

Prodigy 120 points

Part Number: LAUNCHXL-CC1350
Other Parts Discussed in Thread: CC1350STK, CC1350

Tool/software: Code Composer Studio

Using CC1350 LaunchPad, I want to connect PC and CC1350STK.

In the Project Zero, I need two projects. But I can't find these projects,

bim_extflash_cc1350lp
simple_peripheral_cc1350lp_app_FlashOnly_OAD_ExtFlash

Where are these projects in TI Resource Explorer?

over 8 years ago

0 YiKai Chen over 8 years ago

Guru 735695 points

You can install SIMPLELINK-CC13X0-SDK 1.4.0 to get bim_extflash_cc1350lp under C:\ti\simplelink_cc13x0_sdk_1_40_00_10\examples\rtos\CC1350_LAUNCHXL\blestack\util\bim_extflash and simple_peripheral_cc1350lp_app_FlashOnly_OAD_ExtFlash under C:\ti\simplelink_cc13x0_sdk_1_40_00_10\examples\rtos\CC1350_LAUNCHXL\blestack\simple_peripheral\tirtos\ccs

0 user5033405 over 8 years ago in reply to YiKai Chen

Prodigy 120 points

Thank you.
I have imported the bim_extflash folder and ccs folder.
In the "Building BLE firmware images for OAD" section, I have built these folder. But there is no hex file.
The process was not correct?

0 user5033405 over 8 years ago in reply to user5033405

Prodigy 120 points

I could build the project when I use CCS import.

0 YiKai Chen over 8 years ago in reply to user5033405

Guru 735695 points

You have to check "Enable ARM Hex Utility" in Project Properties.

Sub-1 GHz

Sub-1 GHz forum

CCS/LAUNCHXL-CC1350: Required projects of Project Zero