Part Number: CC1310
Other Parts Discussed in Thread: CC1120
Hi All,
We are working on cc1310, in our previews tag(cc1120) our TX power was 2dbm and -3 dbm(in FCC mode).
In the current cc1310 we want to start with 2dbm and change to different TX power in order to set the best TX power for our TAG(power consumption and rang).
In the technical document section 23.3.4.16 Table 23-47m the reference of the TX power is: "Output power setting; use value from SmartRF Studio.".
I tried to get the TX power from SmartRF, unfortantlly there are only 5 values: 6, 10, 13, 13.7, 15.
Where can i get other values?
The values that i am loking for are: from -5dmb to 10dbm.
