CC3200: Use Transceiver mode with filtering in the receiver

Ahmed Ben Amara

Intellectual 850 points

Part Number: CC3200
Other Parts Discussed in Thread: CC3100

Hello,

Is it possible to use transceiver mode with L2 or L3 filtering in wich the receiver does not capt any frame not needed?

Thank you

over 7 years ago

0 Benjamin Moore over 7 years ago

TI__Mastermind 30760 points

Hi Ahmed,

It is possible to filter using the Rx Filter feature described in chapter 15 of the CC3100/CC3200 User Guide. Here transceiver mode is referred to as promiscuous mode in the documentation, but yes this is possible to some extent.

http://www.ti.com/lit/ug/swru368a/swru368a.pdf

Best Regards,

Ben M

0 Ahmed Ben Amara over 7 years ago in reply to Benjamin Moore

Intellectual 850 points

Hi Benjamin,
I really appreciate your supports.Thank you
Best Regards

Wi-Fi

Wi-Fi forum

CC3200: Use Transceiver mode with filtering in the receiver