Linux/WL1835MOD: Linux/WL1835MOD : Antenna configuration for b/g/n mode

Mark Chiu

Prodigy 20 points

Part Number: WL1835MOD
Other Parts Discussed in Thread: WL1837MOD

Tool/software: Linux

please help to confirm WL1835MOD b&g support mode

1. MIMO mode (signal from ant 1and 2 at same time)

2. Diversity mode (signal from ant1 or 2 at same time )

3. SISO mode (Signal from ant1 only)

WL1835MOD HT20 support MIMO mode , right ?

WL1835MOD HT40 support SISO mode from datasheet

1. Diversity mode (signal from ant1 or 2 at same time )

2. SISO mode (Signal from ant1 only)

Thanks!!!

over 6 years ago

0 S over 6 years ago

TI__Mastermind 35795 points

Hi,
WL1835MOD supports following on 2.4GHz band:
SISO 20/40 MHZ ,MIMO/MRC 20MHz
It doesn't support diversity on 2.4GHz band.

WL1837MOD support all of the above features plus SISO20/SISO40 and diversity on 5GHz band

Saurabh

0 Mark Chiu over 6 years ago in reply to S

Prodigy 20 points

hi Saurabh

please help me to clarify below WL1835MOD question

1. B/G mode signal only use ANT1

2. N mode signal use ANT1 &2 , but ANT1 should be turn on first.

Thanks!!!

0 S over 6 years ago in reply to Mark Chiu

TI__Mastermind 35795 points

Hi Mark ,
ANT1 is used in SISO mode and ANT2 is used ( along with ANT1) only in MIMO mode.

Saurabh

Wi-Fi

Wi-Fi forum

Linux/WL1835MOD: Linux/WL1835MOD : Antenna configuration for b/g/n mode