XBee with MSP430

Yusuf Görüm

Hello,

PROJECT:

I have MSP430s which have connections with XBees. And these constructions built a Mesh network. I want to send data like that;

PC ---> DATA ----> [ MSP430 & XBee ] ))) ........( Mesh Network )............. ((( [ XBee & MSP430 ] ---> DATA --> PC

I will use Code Composer Studio v4, XCTU

I am curious about you have any project files / sources / c codes like this project.

Please Help me,

Best regards,

over 12 years ago

0 Greenja over 12 years ago

Guru 22270 points

Hello Yusuf,

There was a similar post to yours that was answered successfully here.

Also, you may find this project interesting.

Thanks,

0 Yusuf Görüm over 12 years ago in reply to Greenja

Prodigy 30 points

Hello,

Thanks for you answer. Actually I am curious about how can I configure XBee with MSP430 on Code Composer Studio.

I wont use XCTU for configuration. I should write codes in Code Composer Studio. Is it possible?

If it is, is there any projects like that?

Best regards,

Yusuf Görüm

0 Greenja over 12 years ago in reply to Yusuf Görüm

Guru 22270 points

Hello Yusuf,

There were two links in my previous post. The first one points to the use of either CCS or IAR, the op did not specify the IDE they used. The code should be easily ported from one to the other. I don't see a problem using CCS for your project,

Thanks,

0 Yusuf Görüm over 12 years ago in reply to Greenja

Prodigy 30 points

Thank you I didnt recognize first link.

Zigbee & Thread

Zigbee & Thread forum

XBee with MSP430