CC2538: many to one route discovery

Dhanraj

Guru 14805 points

Part Number: CC2538
Other Parts Discussed in Thread: Z-STACK, ,

Hello,

During many to one route discovery request, which option is used by default in z-stack 3.0 concentrator

1) Many to one route discovery with route cache

2) Many to one route discovery without route cache

3) Unicast

over 6 years ago

0 Ryan Brown1 over 6 years ago

TI__Guru**** 202096 points

Unicast is the default route discovery, many-to-one is enabled by setting CONCENTRATOR_ENABLE to TRUE and route cache is used by setting CONCENTRATOR_ROUTE_CACHE to TRUE. These are defined in ZGlobals.h

Regards,
Ryan

0 Dhanraj over 6 years ago in reply to Ryan Brown1

Guru 14805 points

M using cc2538-cc2592emk for znp , which option should i use for large network , CONCENTRATOR_ROUTE_CACHE to TRUE or FALSE

0 Ryan Brown1 over 6 years ago in reply to Dhanraj

TI__Guru**** 202096 points

If you have enough memory available (which I assume will be fine on a CC2538 ZNP) then you should definitely use a route cache.

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

CC2538: many to one route discovery