[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.41-gf9f6f0db2d (gtbldadm@ubuntu-16) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 PREEMPT Wed Mar 29 17:37:15 EDT 2017 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone Black [ 0.000000] cma: Reserved 48 MiB at 0x9d000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.0 (sgx neon ) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=PARTUUID=5acae36b-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 459924K/524288K available (6603K kernel code, 317K rwdata, 2416K rodata, 264K init, 265K bss, 15212K reserved, 49152K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d7004 (9021 kB) [ 0.000000] .init : 0xc08d8000 - 0xc091a000 ( 264 kB) [ 0.000000] .data : 0xc091a000 - 0xc09694b0 ( 318 kB) [ 0.000000] .bss : 0xc09694b0 - 0xc09abbd8 ( 266 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000014] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000033] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000042] OMAP clocksource: timer1 at 24000000 Hz [ 0.000182] clocksource_probe: no matching clocksources found [ 0.000334] Console: colour dummy device 80x30 [ 0.000355] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000361] This ensures that you still see kernel messages. Please [ 0.000366] update your kernel commandline. [ 0.000381] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) [ 0.089237] pid_max: default: 32768 minimum: 301 [ 0.089351] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.089360] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.089973] Initializing cgroup subsys io [ 0.090001] Initializing cgroup subsys memory [ 0.090034] Initializing cgroup subsys devices [ 0.090048] Initializing cgroup subsys freezer [ 0.090060] Initializing cgroup subsys perf_event [ 0.090071] Initializing cgroup subsys pids [ 0.090096] CPU: Testing write buffer coherency: ok [ 0.090458] Setting up static identity map for 0x80008200 - 0x80008260 [ 0.092260] devtmpfs: initialized [ 0.102159] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.114686] omap_hwmod: debugss: _wait_target_disable failed [ 0.170118] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.173644] pinctrl core: initialized pinctrl subsystem [ 0.174831] NET: Registered protocol family 16 [ 0.176650] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.199228] cpuidle: using governor ladder [ 0.229218] cpuidle: using governor menu [ 0.232982] OMAP GPIO hardware version 0.1 [ 0.241428] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.276200] edma 49000000.edma: TI EDMA DMA engine driver [ 0.279393] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 0.279446] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe [ 0.279561] media: Linux media interface: v0.10 [ 0.279625] Linux video capture interface: v2.00 [ 0.279667] pps_core: LinuxPPS API ver. 1 registered [ 0.279673] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.279696] PTP clock support registered [ 0.279747] EDAC MC: Ver: 3.0.0 [ 0.280756] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.281060] Advanced Linux Sound Architecture Driver Initialized. [ 0.282054] clocksource: Switched to clocksource timer1 [ 0.291167] NET: Registered protocol family 2 [ 0.291846] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.291894] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.291932] TCP: Hash tables configured (established 4096 bind 4096) [ 0.292000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.292016] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.292215] NET: Registered protocol family 1 [ 0.292586] RPC: Registered named UNIX socket transport module. [ 0.292600] RPC: Registered udp transport module. [ 0.292606] RPC: Registered tcp transport module. [ 0.292611] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.293438] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.295079] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.301918] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.302802] NFS: Registering the id_resolver key type [ 0.302864] Key type id_resolver registered [ 0.302871] Key type id_legacy registered [ 0.302932] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.306024] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.306051] io scheduler noop registered [ 0.306062] io scheduler deadline registered [ 0.306187] io scheduler cfq registered (default) [ 0.307347] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.359627] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.363330] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250 [ 0.970956] console [ttyS0] enabled [ 0.975358] [drm] Initialized drm 1.1.0 20060810 [ 0.986620] loop: module loaded [ 0.991753] libphy: Fixed MDIO Bus: probed [ 1.052118] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.058254] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.065339] libphy: 4a101000.mdio: probed [ 1.069379] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 1.079289] cpsw 4a100000.ethernet: Detected MACID = c8:a0:30:ae:41:68 [ 1.086055] cpsw 4a100000.ethernet: cpts: overflow check period 850 [ 1.093964] mousedev: PS/2 mouse device common for all mice [ 1.100099] i2c /dev entries driver [ 1.104607] cpuidle: enable-method property 'ti,am3352' found operations [ 1.112007] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.193406] ledtrig-cpu: registered to indicate activity on CPUs [ 1.202804] NET: Registered protocol family 10 [ 1.208599] sit: IPv6 over IPv4 tunneling driver [ 1.214084] NET: Registered protocol family 17 [ 1.218904] Key type dns_resolver registered [ 1.223527] omap_voltage_late_init: Voltage driver support not added [ 1.235539] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.245804] mmc0: new high speed SDHC card at address 0001 [ 1.251888] mmcblk0: mmc0:0001 TEAM 7.39 GiB [ 1.258493] mmcblk0: p1 p2 [ 1.266657] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.274159] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.315388] mmc1: MAN_BKOPS_EN bit is not set [ 1.321661] mmc1: new high speed MMC card at address 0001 [ 1.327690] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.332532] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.338672] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.404302] tda998x 0-0070: found TDA19988 [ 1.409700] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops) [ 1.415799] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.422454] [drm] No driver support for vblank timestamp query. [ 1.428719] tilcdc 4830e000.lcdc: No connectors reported connected with modes [ 1.435921] [drm] Cannot find any crtc or sizes - going 1024x768 [ 1.450472] Console: switching to colour frame buffer device 128x48 [ 1.462021] tilcdc 4830e000.lcdc: fb0: frame buffer device [ 1.492143] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0 [ 1.498165] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.505143] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.512311] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.519370] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.526449] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.533396] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.541067] hctosys: unable to open rtc device (rtc0) [ 1.549512] ALSA device list: [ 1.552670] No soundcards found. [ 8.196498] EXT4-fs (mmcblk0p2): recovery complete [ 8.290436] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 8.298762] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 8.311568] devtmpfs: mounted [ 8.315532] Freeing unused kernel memory: 264K (c08d8000 - c091a000) [ 8.322418] This architecture does not have kernel memory protection. [ 8.667043] systemd[1]: System time before build time, advancing clock. [ 8.742759] random: systemd: uninitialized urandom read (16 bytes read, 26 bits of entropy available) [ 8.758872] random: systemd: uninitialized urandom read (16 bytes read, 26 bits of entropy available) [ 8.783848] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 8.802950] systemd[1]: Detected architecture arm. Welcome to Arago 2016.12! [ 8.834231] systemd[1]: Set hostname to . [ 8.928020] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 28 bits of entropy available) [ 8.955897] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 29 bits of entropy available) [ 8.974192] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 29 bits of entropy available) [ 8.997126] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 30 bits of entropy available) [ 9.027953] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 31 bits of entropy available) [ 9.188762] random: systemd: uninitialized urandom read (16 bytes read, 35 bits of entropy available) [ 9.198875] random: systemd: uninitialized urandom read (16 bytes read, 35 bits of entropy available) [ 9.209873] random: systemd: uninitialized urandom read (16 bytes read, 35 bits of entropy available) [ 9.529222] systemd[1]: [/lib/systemd/system/gadget-init.service:15] Unknown lvalue 'ExecStopPre' in section 'Service' [ 9.882936] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 9.890765] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 9.898556] systemd[1]: sysinit.target: Found dependency on basic.target/start [ 9.905914] systemd[1]: sysinit.target: Found dependency on sockets.target/start [ 9.913380] systemd[1]: sysinit.target: Found dependency on rpcbind.socket/start [ 9.920819] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 9.928276] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ 9.937751] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 9.978295] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 10.002858] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 10.033170] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 10.062646] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 10.092997] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 10.122691] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 10.185013] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 10.213030] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 10.242543] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 10.265488] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 10.294382] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 10.327721] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 10.376694] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 10.447808] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 10.499101] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 10.550508] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 10.590606] cryptodev: driver 1.8 loaded. [ 10.604200] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 10.637025] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 10.683403] systemd[1]: Reached target Swap. [[ 10.708291] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) OK ] Reached target Swap. [ 10.734404] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 10.762517] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 10.787042] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 10.822922] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 10.856992] systemd[1]: Starting Journal Service... Starting Journal Service... [ 10.893217] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 10.975206] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 11.012840] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 11.031632] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 11.063301] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Setup Virtual Console. [ OK ] Started Load Kernel Modules. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... Starting Flush Journal to Persistent Storage... [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ 12.471337] systemd-journald[107]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started udev Coldplug all Devices. [ 13.751379] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ OK ] Found device /dev/ttyS0. [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ 14.087972] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 Starting Load/Save Random Seed... [ 14.187429] 47401300.usb-phy supply vcc not found, using dummy regulator [ 14.364289] 47401b00.usb-phy supply vcc not found, using dummy regulator [ OK ] Started Create Volatile Files and Directories. [ OK ] Started Load/Save Random Seed.[ 14.521301] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 14.775312] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 15.045834] remoteproc0: wkup_m3 is available [ 15.050321] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 15.201757] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 15.445159] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 15.487954] remoteproc0: powering up wkup_m3 [ 15.541122] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217280 [ 15.648027] remoteproc0: remote processor wkup_m3 is now up [ 15.648057] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192 [ 15.797211] ti-pruss 4a300000.pruss: creating PRU cores and other child platform devices [ 15.856795] irq: no irq domain found for /ocp/pruss@4a300000/intc@4a320000 ! Starting Network Time Synchronization...[ 15.945384] irq: no irq domain found for /ocp/pruss@4a300000/intc@4a320000 ! Starting Update UTMP about System Boot/Shutdown...[ 16.053236] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok [ 16.142578] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ 16.171485] remoteproc1: 4a334000.pru0 is available [ 16.218947] PM: bootloader does not support rtc-only! [ 16.272341] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 16.433663] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 16.545136] remoteproc1: registered virtio0 (type 7) [ 16.550291] pru-rproc 4a334000.pru0: PRU rproc node /ocp/pruss@4a300000/pru0@4a334000 probed successfully [ OK ] Started Network Time Synchronization. [ 16.726591] remoteproc2: 4a338000.pru1 is available [ 16.731605] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 16.876774] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ OK ] Found device /dev/ttyS3. [ 16.995861] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 17.007789] remoteproc2: registered virtio1 (type 7) [ 17.046271] pru-rproc 4a338000.pru1: PRU rproc node /ocp/pruss@4a300000/pru1@4a338000 probed successfully [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Found device /dev/mmcblk0p1. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting Synchronize System and HW clocks... [ OK ] Reached target System Time Synchronized. [ OK ] Started Synchronize System and HW clocks. [ 19.249164] usbcore: registered new interface driver usbfs [ 19.312412] usbcore: registered new interface driver hub [ 19.355915] usbcore: registered new device driver usb [ 19.469766] musb-hdrc musb-hdrc.2.auto: MUSB HDRC host driver [ 19.562284] musb-hdrc musb-hdrc.2.auto: new USB bus registered, assigned bus number 1 [ 19.620122] hub 1-0:1.0: USB hub found [ 19.634740] remoteproc1: powering up 4a334000.pru0 [ 19.653184] hub 1-0:1.0: 1 port detected [ 19.661560] remoteproc1: Booting fw image am335x-pru0-fw, size 75724 [ 19.682435] ti-pruss 4a300000.pruss: configured system_events = 0x0000000000030000 intr_channels = 0x00000005 host_intr = 0x00000005 [ 19.767903] remoteproc1: remote processor 4a334000.pru0 is now up [ 19.812708] virtio_rpmsg_bus virtio0: creating channel rpmsg-pru addr 0x1e [ 19.820359] virtio_rpmsg_bus virtio0: rpmsg host is online [ 19.841968] remoteproc2: powering up 4a338000.pru1 [ 19.852977] remoteproc2: Booting fw image am335x-pru1-fw, size 75724 [ 19.859633] ti-pruss 4a300000.pruss: configured system_events = 0x00000000000c0000 intr_channels = 0x0000000a host_intr = 0x0000000a [ 19.912609] remoteproc2: remote processor 4a338000.pru1 is now up [ 19.923166] virtio_rpmsg_bus virtio1: creating channel rpmsg-pru addr 0x1f [ 19.938277] virtio_rpmsg_bus virtio1: rpmsg host is online [ 20.005019] rpmsg_pru rpmsg0: new rpmsg_pru device: /dev/rpmsg_pru30 [ 20.013616] rpmsg_pru rpmsg1: new rpmsg_pru device: /dev/rpmsg_pru31 [ 20.162235] usb 1-1: new full-speed USB device number 2 using musb-hdrc [ OK ] Reached target Sound Card. [ OK ] Reached target System Initialization. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on dropbear.socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Login Service... [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. [ 20.661709] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ OK ] Started System Logging Service. [ 20.710933] hid-generic 0003:0451:BEF3.0001: device has no listeners, quitting Starting uim-sysfs.service... [ 20.763359] cdc_acm 1-1:1.3: ttyACM1: USB ACM device [ 20.770479] usbcore: registered new interface driver usbhid [ 20.810388] usbcore: registered new interface driver cdc_acm Starting Start USB gadget... [ 20.820785] usbhid: USB HID core driver Starting Telephony service...[ 20.857198] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ OK ] Started D-Bus System Message Bus. [ 20.936238] random: nonblocking pool is initialized [ 21.363188] using random self ethernet address [ 21.367679] using random host ethernet address [ 21.406449] using host ethernet address: C8:A0:30:AE:41:6A [ 21.411889] using random self ethernet address [ 21.434827] using random host ethernet address [ 21.439376] using host ethernet address: C8:A0:30:AE:41:6A [ 21.463332] NET: Registered protocol family 15 [ OK ] Started Telephony service. [ 21.525826] usb0: HOST MAC c8:a0:30:ae:41:6a [ 21.565641] usb0: MAC b6:7d:ed:37:30:05 Starting Network Service... [ 21.608914] Bluetooth: Core ver 2.21 [ OK ] Started Kernel Logging Service. [ 21.657637] NET: Registered protocol family 31 [ 21.706262] Mass Storage Function, version: 2009/09/11 [ 21.711449] LUN: removable file: (no medium) Starting Save/Restore Sound Card State... [ 21.731620] Bluetooth: HCI device and connection manager initialized [ 21.792595] LUN: removable read only file: /dev/mmcblk0p1 Starting Avahi mDNS/DNS-SD Stack... [ 21.813993] Bluetooth: HCI socket layer initialized [ 21.818932] Bluetooth: L2CAP socket layer initialized [ 21.890016] Number of LUNs=1 Starting Print notice about GPLv3 packages... [ 21.912552] g_multi gadget: Multifunction Composite Gadget [ 21.940071] Bluetooth: SCO socket layer initialized Starting Permit User Sessions... [ 21.972409] g_multi gadget: g_multi ready [ 22.134406] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ OK ] Started Save/Restore Sound Card State. [ OK ] Started Permit User Sessions. [ OK ] Started Network Service. [ 22.404775] net eth0: initializing cpsw version 1.12 (0) [ 22.432298] Initializing XFRM netlink socket [ 22.458685] net eth0: initialized cpsw ale version 1.4 [ 22.512213] net eth0: ALE Table size 1024 [ 22.518719] net eth0: phy found : id is : 0x7c0f1 [ 22.607451] libphy: PHY 4a101000.mdio:01 not found [ 22.639986] net eth0: phy "4a101000.mdio:01" not found on slave 1, err -19 [ 22.737861] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Found device /dev/ttyGS0. [ OK ] Started Start USB gadget. [ 25.532948] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 25.584288] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Login Service. Mounting Configuration File System... [ OK ] Reached target Network. Starting Lightning Fast Webserver With Light System Requirements... Starting Network Name Resolution... [ OK ] Started Serial Getty on ttyGS0. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Serial Getty on ttyS3. [ OK ] Mounted Configuration File System. [ OK ] Started Network Name Resolution. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started uim-sysfs.service. Starting rc.pvr.service... [ 28.437102] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ OK ] Started rc.pvr.service. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils bison-dev bison cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbserver gstreamer1.0-libav hidapi libcairo-perf-utils libgmp10 libidn11 libmpc3 libmpfr4 m4-dev m4 make nettle swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** Starting weston.service... [ OK ] Started Print notice about GPLv3 packages. [ OK ] Started weston.service. Starting telnetd.service... [ OK ] Started telnetd.service. Starting thttpd.service... Starting busybox-udhcpd.service... [ OK ] Started thttpd.service. [ OK ] Started busybox-udhcpd.service. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting matrix-gui-2.0.service... [0;32m OK ] Started matrix-gui-2.0.service. p Starting thermal-zone-init.service... Starting parse-ip.service... [ OK ] Started thermal-zone-init.service. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am335x-evm ttyS0 Arago 2016.12 am335x-evm ttyS0 am335x-evm login: root root@am335x-evm:~# cd AWS/prebuilt root@am335x-evm:~/AWS/prebuilt# ls bin iot-gateway run_demo.sh root@am335x-evm:~/AWS/prebuilt# ifconfig eth0 Link encap:Ethernet HWaddr C8:A0:30:AE:41:68 inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::caa0:30ff:feae:4168%132688/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9 errors:0 dropped:0 overruns:0 frame:0 TX packets:58 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2236 (2.1 KiB) TX bytes:9974 (9.7 KiB) Interrupt:173 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1%132688/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:166 errors:0 dropped:0 overruns:0 frame:0 TX packets:166 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:12688 (12.3 KiB) TX bytes:12688 (12.3 KiB) usb0 Link encap:Ethernet HWaddr B6:7D:ED:37:30:05 inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@am335x-evm:~/AWS/prebuilt# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8): 56 data bytes 64 bytes from 8.8.8.8: seq=39 ttl=44 time=63.433 ms 64 bytes from 8.8.8.8: seq=40 ttl=44 time=57.614 ms 64 bytes from 8.8.8.8: seq=41 ttl=44 time=57.046 ms 64 bytes from 8.8.8.8: seq=42 ttl=44 time=106.342 ms 64 bytes from 8.8.8.8: seq=43 ttl=44 time=75.693 ms 64 bytes from 8.8.8.8: seq=44 ttl=44 time=115.164 ms 64 bytes from 8.8.8.8: seq=45 ttl=44 time=85.625 ms 64 bytes from 8.8.8.8: seq=46 ttl=44 time=43.884 ms 64 bytes from 8.8.8.8: seq=47 ttl=44 time=93.070 ms 64 bytes from 8.8.8.8: seq=48 ttl=44 time=92.471 ms 64 bytes from 8.8.8.8: seq=49 ttl=44 time=101.835 ms 64 bytes from 8.8.8.8: seq=50 ttl=44 time=111.107 ms 64 bytes from 8.8.8.8: seq=51 ttl=44 time=70.270 ms 64 bytes from 8.8.8.8: seq=52 ttl=44 time=79.870 ms 64 bytes from 8.8.8.8: seq=53 ttl=44 time=149.105 ms 64 bytes from 8.8.8.8: seq=54 ttl=44 time=78.481 ms 64 bytes from 8.8.8.8: seq=55 ttl=44 time=168.000 ms 64 bytes from 8.8.8.8: seq=56 ttl=44 time=77.085 ms 64 bytes from 8.8.8.8: seq=57 ttl=44 time=96.347 ms 64 bytes from 8.8.8.8: seq=58 ttl=44 time=85.868 ms 64 bytes from 8.8.8.8: seq=59 ttl=44 time=95.208 ms 64 bytes from 8.8.8.8: seq=60 ttl=44 time=94.508 ms 64 bytes from 8.8.8.8: seq=61 ttl=44 time=163.654 ms 64 bytes from 8.8.8.8: seq=62 ttl=44 time=43.349 ms 64 bytes from 8.8.8.8: seq=63 ttl=44 time=82.624 ms 64 bytes from 8.8.8.8: seq=64 ttl=44 time=102.082 ms 64 bytes from 8.8.8.8: seq=65 ttl=44 time=621.758 ms 64 bytes from 8.8.8.8: seq=66 ttl=44 time=70.711 ms ^C --- 8.8.8.8 ping statistics --- 67 packets transmitted, 28 packets received, 58% packet loss round-trip min/avg/max = 43.349/110.078/621.758 ms root@am335x-evm:~/AWS/prebuilt# cd bin root@am335x-evm:~/AWS/prebuilt/bin# vi collector.cfg load-nv-sim = true ;The collector app can use either a socket or uart connection to the co-pr ;; Alternatively: 'interface = socket' interface = uart ; Many of the "config-ITEMS" allow for direct configuration ; and overriding the 'config.h' default values config-auto-start = true config-channel-mask = 0 config-channel-page = 9 config-coord-short-addr = 0x1234 config-double-trickle-timer = false config-dwell-time = 250 config-fh-async-channel-mask = all config-fh-channel-mask = all config-fh-enable = false config-fh-netname = "FHTest" config-fh-pan-size = 0x0032 config-linkquality = 1 config-mac-beacon-order = 15 config-mac-superframe-order = 15 config-pan-id = 0xAcDc config-percentfilter = 0x0ff config-phy-id = 1 config-scan-duration = 5 config-secure = true config-trickle-max-clk-duration = 960000 config-trickle-min-clk-duration = 30000 ; msg-dbg-data = apimac-msgs.cfg root@am335x-evm:~/AWS/prebuilt/bin# cd .. root@am335x-evm:~/AWS/prebuilt# bash run_demo.sh Launching the Collector Application in the background Found Mac Co-Processor Version info is: Transport: 3 Product: 1 Major: 2 Minor: 0 Maint: 0 ---------------------------------------- Start the gateway application Collector Running as Process id: 964 Launching Node-JS gateway application in background Gateway is running as Process id: 980 root@am335x-evm:~/AWS/prebuilt# Connected to App Server AWS Cloud Adapter error { [Error: getaddrinfo ENOTFOUND https://a23op339u3ex9t.iot.us-east-1.amazonaws.com https://a23op339u3ex9t.iot.us-east-1.amazonaws.com:8883] code: 'ENOTFOUND', errno: 'ENOTFOUND', syscall: 'getaddrinfo', hostname: 'https://a23op339u3ex9t.iot.us-east-1.amazonaws.com', host: 'https://a23op339u3ex9t.iot.us-east-1.amazonaws.com', port: 8883 } AWS Cloud Adapter offline AWS Cloud Adapter close AWS Cloud Adapter reconnect AWS Cloud Adapter error { [Error: getaddrinfo ENOTFOUND https://a23op339u3ex9t.iot.us-east-1.amazonaws.com https://a23op339u3ex9t.iot.us-east-1.amazonaws.com:8883] code: 'ENOTFOUND', errno: 'ENOTFOUND', syscall: 'getaddrinfo', hostname: 'https://a23op339u3ex9t.iot.us-east-1.amazonaws.com', host: 'https://a23op339u3ex9t.iot.us-east-1.amazonaws.com', port: 8883 } AWS Cloud Adapter offline AWS Cloud Adapter close AWS Cloud Adapter reconnect AWS Cloud Adapter error { [Error: getaddrinfo ENOTFOUND https://a23op339u3ex9t.iot.us-east-1.amazonaws.com https://a23op339u3ex9t.iot.us-east-1.amazonaws.com:8883] code: 'ENOTFOUND', errno: 'ENOTFOUND', syscall: 'getaddrinfo', hostname: 'https://a23op339u3ex9t.iot.us-east-1.amazonaws.com', host: 'https://a23op339u3ex9t.iot.us-east-1.amazonaws.com', port: 8883 } AWS Cloud Adapter offline AWS Cloud Adapter close AWS Cloud Adapter reconnect AWS Cloud Adapter error { [Error: getaddrinfo ENOTFOUND https://a23op339u3ex9t.iot.us-east-1.amazonaws.com https://a23op339u3ex9t.iot.us-east-1.amazonaws.com:8883] code: 'ENOTFOUND', errno: 'ENOTFOUND', syscall: 'getaddrinfo', hostname: 'https://a23op339u3ex9t.iot.us-east-1.amazonaws.com', host: 'https://a23op339u3ex9t.iot.us-east-1.amazonaws.com', port: 8883 } AWS Cloud Adapter offline AWS Cloud Adapter close AWS Cloud Adapter reconnect AWS Cloud Adapter error { [Error: getaddrinfo ENOTFOUND https://a23op339u3ex9t.iot.us-east-1.amazonaws.com https://a23op339u3ex9t.iot.us-east-1.amazonaws.com:8883] code: 'ENOTFOUND', errno: 'ENOTFOUND', syscall: 'getaddrinfo', hostname: 'https://a23op339u3ex9t.iot.us-east-1.amazonaws.com', host: 'https://a23op339u3ex9t.iot.us-east-1.amazonaws.com', port: 8883 } AWS Cloud Adapter offline AWS Cloud Adapter close AWS Cloud Adapter reconnect