shabeer wl1271_init 1.0 sdio.c
in wl12xx_set_power delay added on=1
wl12xx: shabeer wl12xx_probe ****** SET irqflags=IRQF_TRIGGER_FALLING******** main.c

add wake up source irq 103
shabeer wl12xx_sdio_power_on sdio.c
in wl12xx_set_power delay added on=1
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
shabeer wl12xx_sdio_power_off sdio.c
in wl12xx_set_power delay added on=0
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=0
wl12xx: loaded
shabeer wl1271_init ret=ba452000 in sdio_register_driver sdio.c
wl12xx: power up
shabeer wl12xx_sdio_power_on sdio.c
in wl12xx_set_power delay added on=1
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=1
shabeer in dri/host/mmc/sdhci--imx.c
wl12xx: firmware booted in PLT mode (Rev 6.3.10.0.136)
wl12xx: ERROR command execute failure 2
------------[ cut here ]------------
WARNING: at /home/flex/shabeer/wifi_git/compat-wireless/drivers/net/wireless/wl12xx/main.c:1432 wl12xx_queue_recovery_work+0x40/0x98 [wl12xx]()
Modules linked in: wl12xx_sdio wl12xx mac80211 compat cfg80211
[<8006597c>] (unwind_backtrace+0x0/0x140) from [<805d8398>] (dump_stack+0x20/0x24)
[<805d8398>] (dump_stack+0x20/0x24) from [<8009e458>] (warn_slowpath_common+0x64/0x74)
[<8009e458>] (warn_slowpath_common+0x64/0x74) from [<8009e524>] (warn_slowpath_null+0x2c/0x34)
[<8009e524>] (warn_slowpath_null+0x2c/0x34) from [<7f0cde84>] (wl12xx_queue_recovery_work+0x40/0x98 [wl12xx])
[<7f0cde84>] (wl12xx_queue_recovery_work+0x40/0x98 [wl12xx]) from [<7f0d15b4>] (wl1271_cmd_send+0x98/0x560 [wl12xx])
[<7f0d15b4>] (wl1271_cmd_send+0x98/0x560 [wl12xx]) from [<7f0d2904>] (wl1271_cmd_test+0x5c/0xb0 [wl12xx])
[<7f0d2904>] (wl1271_cmd_test+0x5c/0xb0 [wl12xx]) from [<7f0e6a00>] (wl1271_tm_cmd+0x1a8/0x584 [wl12xx])
[<7f0e6a00>] (wl1271_tm_cmd+0x1a8/0x584 [wl12xx]) from [<7f05baac>] (ieee80211_testmode_cmd+0x34/0x50 [mac80211])
[<7f05baac>] (ieee80211_testmode_cmd+0x34/0x50 [mac80211]) from [<7f009578>] (nl80211_testmode_do+0x5c/0x78 [cfg80211])
[<7f009578>] (nl80211_testmode_do+0x5c/0x78 [cfg80211]) from [<805106b8>] (genl_rcv_msg+0x224/0x268)
[<805106b8>] (genl_rcv_msg+0x224/0x268) from [<8050fc40>] (netlink_rcv_skb+0xbc/0xd0)
[<8050fc40>] (netlink_rcv_skb+0xbc/0xd0) from [<80510488>] (genl_rcv+0x38/0x44)
[<80510488>] (genl_rcv+0x38/0x44) from [<8050f570>] (netlink_unicast+0x2b0/0x308)
[<8050f570>] (netlink_unicast+0x2b0/0x308) from [<8050f934>] (netlink_sendmsg+0x2bc/0x34c)
[<8050f934>] (netlink_sendmsg+0x2bc/0x34c) from [<804d5d34>] (sock_sendmsg+0xac/0xd0)
[<804d5d34>] (sock_sendmsg+0xac/0xd0) from [<804d7938>] (__sys_sendmsg+0x2ec/0x304)
[<804d7938>] (__sys_sendmsg+0x2ec/0x304) from [<804d8530>] (sys_sendmsg+0x4c/0x7c)
[<804d8530>] (sys_sendmsg+0x4c/0x7c) from [<8005da80>] (ret_fast_syscall+0x0/0x30)
---[ end trace af24d1645ec36b6b ]---
wl12xx: WARNING TEST command failed
wl12xx: WARNING testmode cmd test failed: -5
Fail to tune channelwl12xx: power down

shabeer wl12xx_sdio_power_off sdio.c
in wl12xx_set_power delay added on=0
shabeer in dri/host/mmc/sdhci--imx.c
in wl12xx_set_power delay added on=0
shabeer wl1271_exit 1.0 sdio.c
in wl12xx_set_power delay added on=1
remove wake up source irq 103
in wl12xx_set_power delay added on=0
Calibration not complete. Removing half-baked nvs
root@imx6qsabresd:~#