1. ARM FLASHING LOG:

ARM Flashing
=====================================
Communication initialization...................	 OK
... JTAG Chain -> Disabled
... JTAG IR size = 10,  No of TAPs = 2
 #1:  initialization error
 #2:  initialization error
 #3:  initialization error
 #4:  initialization error
 #5:  initialization error
 #6:  OSC=48.31 MHz, Sys.CLK=48.31 MHz
Erasing memory.....................................	 done
Selected Memory Blank Check.
 #6:  ..	 OK
Flash programming.................................
 #6:  ..	 OK
Verifying checksum...........................
 #6:  ..	 OK
Writing Locking Registers .........
 #6:  ..	 OK
Writing Debug Registers .........
 #6:  ..	 OK
 -------- D O N E --- ( run time =   7.0 sec.)


2. MSP FLASHING LOG WITHOUT FUSEBLOW:


MSP Flashing
 == Auto Program ===
=====================================
JTAG communication initialization....	 OK
Verifying Security Fuse ....................	 OK
...	 OK
Erasing memory ...............................	 done
JTAG communication initialization....	 OK
Flash programming ....................	 done
Verifying check sum .......................	 OK
 -------- D O N E --- ( run time =   2.0 sec.)




2. MSP FLASHING LOG WITH FUSEBLOW:

MSP Fuseblow
 == Auto Program ===
=====================================
JTAG communication initialization....	 OK
Verifying Security Fuse ....................	 OK
Erasing memory ...............................	 done
JTAG communication initialization....	 OK
Flash programming ....................	 done
Verifying check sum .......................	 OK
 -------- D O N E --- ( run time =   2.0 sec.)