U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') SPL initial stack usage: 13384 bytes Trying to boot from MMC1 Authentication passed Authentication passed Authentication passed Authentication passed Authentication passed Starting ATF on ARM64 core... NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty NOTICE: BL31: Built : 09:34:15, Aug 24 2023 U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') SPL initial stack usage: 1856 bytes Error: could not access storage. Trying to boot from MMC1 Authentication passed Authentication passed U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) SoC: AM62X SR1.0 HS-FS Model: Texas Instruments AM625 SK DRAM: 2 GiB Core: 68 devices, 30 uclasses, devicetree: separate MMC: mmc@fa10000: 0, mmc@fa00000: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial [BSP] gd->boot_dev = 9 Saving Environment to MMC... Writing to MMC(0)... OK switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 Running eMMC boot ... 574 bytes read in 15 ms (37.1 KiB/s) EMMC Loaded env from uEnv.txt Importing environment from mmc0 ... 18416128 bytes read in 216 ms (81.3 MiB/s) 62962 bytes read in 16 ms (3.8 MiB/s) Working FDT set to 88000000 ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK Working FDT set to 8feed000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [ 0.000000] Machine model: Texas Instruments AM625 SK [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.000246] Console: colour dummy device 80x25 [ 0.528882] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [ 0.528892] pid_max: default: 32768 minimum: 301 [ 0.528974] LSM: Security Framework initializing [ 0.529096] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.529131] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.530818] rcu: Hierarchical SRCU implementation. [ 0.530824] rcu: Max phase no-delay instances is 400. [ 0.530870] printk: bootconsole [ns16550a0] printing thread started [ 0.583330] Platform MSI: msi-controller@1820000 domain created [ 0.583565] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [ 0.583650] EFI services will not be available. [ 0.583908] smp: Bringing up secondary CPUs ... [ 0.584758] Detected VIPT I-cache on CPU1 [ 0.584870] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [ 0.584887] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [ 0.584942] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.635116] Detected VIPT I-cache on CPU2 [ 0.635200] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [ 0.635213] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [ 0.635245] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.661195] Detected VIPT I-cache on CPU3 [ 0.661283] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [ 0.661296] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [ 0.661328] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.661385] smp: Brought up 1 node, 4 CPUs [ 0.661391] SMP: Total of 4 processors activated. [ 0.695582] CPU features: detected: 32-bit EL0 Support [ 0.695586] CPU features: detected: CRC32 instructions [ 0.695633] CPU: All CPU(s) started at EL2 [ 0.695634] alternatives: applying system-wide alternatives [ 0.697136] devtmpfs: initialized [ 0.708740] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.708766] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.714011] pinctrl core: initialized pinctrl subsystem [ 0.714724] DMI not present or invalid. [ 0.715247] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.732199] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.732491] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.732713] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.732818] audit: initializing netlink subsys (disabled) [ 0.732960] audit: type=2000 audit(0.730:1): state=initialized audit_enabled=0 res=1 [ 0.733519] thermal_sys: Registered thermal governor 'step_wise' [ 0.733523] thermal_sys: Registered thermal governor 'power_allocator' [ 0.733752] ASID allocator initialised with 65536 entries [ 0.748663] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [ 0.757695] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.757705] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.757709] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.757712] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.757716] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.757719] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.757722] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.757726] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.758883] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [ 0.759349] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [ 0.759356] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [ 0.759369] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [ 0.759384] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [ 0.759395] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [ 0.759401] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [ 0.759635] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [ 0.759640] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [ 0.759649] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [ 0.759662] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [ 0.759670] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [ 0.759674] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [ 0.759911] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [ 0.759916] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [ 0.759926] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [ 0.759938] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [ 0.759947] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [ 0.759950] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [ 0.760181] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [ [ 1.020892] printk: console [ttyS2] printing thread started 0.760186] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [ 1.020911] printk: console [ttyS2] enabled [ 1.020914] printk: bootconsole [ns16550a0] disabled [ 1.033669] printk: bootconsole [ns16550a0] printing thread stopped [ 1.034937] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [ 1.034947] omap8250 2810000.serial: using device tree for GPIO lookup [ 1.034960] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [ 1.034976] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [ 1.034988] omap8250 2810000.serial: using lookup tables for GPIO lookup [ 1.034993] omap8250 2810000.serial: No GPIO consumer rs485-term found [ 1.035025] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [ 1.035938] panel-simple display0: GPIO lookup for consumer enable [ 1.035947] panel-simple display0: using device tree for GPIO lookup [ 1.035959] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [ 1.035974] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [ 1.035984] panel-simple display0: using lookup tables for GPIO lookup [ 1.035988] panel-simple display0: No GPIO consumer enable found [ 1.040362] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [ 1.045304] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [ 1.054421] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [ 1.054879] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [ 1.054885] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [ 1.054902] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [ 1.054918] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [ 1.054933] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [ 1.054938] mdio_bus 8000f00.mdio: No GPIO consumer reset found [ 1.088757] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 1.089043] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [ 1.089878] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [ 1.089885] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [ 1.089904] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [ 1.089928] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [ 1.089942] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [ 1.089946] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [ 1.090715] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [ 1.090803] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [ 1.091048] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [ 1.091065] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [ 1.091070] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [ 1.091968] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [ 1.111422] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [ 1.117671] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [ 1.118144] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [ 1.118144] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [ 1.118156] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [ 1.118156] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [ 1.118172] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [ 1.118172] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [ 1.118195] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [ 1.118196] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [ 1.118206] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [ 1.118206] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [ 1.118216] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [ 1.118216] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [ 1.118221] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [ 1.118224] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [ 1.118233] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [ 1.118250] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [ 1.118259] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [ 1.118263] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [ 1.119168] mmc1: CQHCI version 5.10 [ 1.119335] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [ 1.119343] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [ 1.119357] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [ 1.119377] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [ 1.119388] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [ 1.119393] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [ 1.120032] mmc2: CQHCI version 5.10 [ 1.120302] mmc0: CQHCI version 5.10 [ 1.121768] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [ 1.124223] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [ 1.127552] gpiochip_find_base: found new base at 418 [ 1.127766] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [ 1.127835] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [ 1.131145] gpiochip_find_base: found new base at 366 [ 1.131359] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [ 1.131418] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [ 1.133063] gpio-regulator regulator-4: GPIO lookup for consumer (null) [ 1.133076] gpio-regulator regulator-4: using device tree for GPIO lookup [ 1.133096] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [ 1.133113] gpio gpiochip1: Persistence not supported for GPIO 31 [ 1.133126] gpio-regulator regulator-4: GPIO lookup for consumer enable [ 1.133130] gpio-regulator regulator-4: using device tree for GPIO lookup [ 1.133139] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [ 1.133150] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [ 1.133160] gpio-regulator regulator-4: using lookup tables for GPIO lookup [ 1.133165] gpio-regulator regulator-4: No GPIO consumer enable found [ 1.133617] gpio-backlight backlight: GPIO lookup for consumer (null) [ 1.133622] gpio-backlight backlight: using device tree for GPIO lookup [ 1.133635] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [ 1.133650] gpio gpiochip1: Persistence not supported for GPIO 91 [ 1.133654] gpio-509 (backlight): no flags found for (null) [ 1.134156] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [ 1.134170] gpio gpiochip1: Persistence not supported for GPIO 35 [ 1.134174] gpio-453 (?): no flags found for gpios [ 1.134269] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [ 1.134280] gpio gpiochip2: Persistence not supported for GPIO 30 [ 1.134283] gpio-396 (?): no flags found for gpios [ 1.134346] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [ 1.134356] gpio gpiochip2: Persistence not supported for GPIO 9 [ 1.134359] gpio-375 (?): no flags found for gpios [ 1.135028] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 1.137835] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [ 1.155872] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [ 1.157179] ALSA device list: [ 1.157187] No soundcards found. [ 1.160759] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [ 1.165662] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [ 1.191835] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [ 1.211873] mmc1: new MMC card at address 0001 [ 1.212772] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [ 1.220877] mmcblk1: p1 [ 1.221678] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [ 1.223422] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [ 1.224816] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [ 1.300583] mmc0: Command Queue Engine enabled [ 1.300606] mmc0: new HS200 MMC card at address 0001 [ 1.301329] mmcblk0: mmc0:0001 016GB0 14.7 GiB [ 1.305260] mmcblk0: p1 p2 p3 p4 p5 [ 1.306341] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [ 1.307679] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [ 1.308788] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [ 1.325464] EXT4-fs (mmcblk0p4): recovery complete [ 1.325848] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [ 1.325933] VFS: Mounted root (ext4 filesystem) on device 179:100. [ 1.326158] devtmpfs: mounted [ 1.327550] Freeing unused kernel memory: 1856K [ 1.335833] Run /sbin/init as init process [ 1.335840] with arguments: [ 1.335842] /sbin/init [ 1.335844] with environment: [ 1.335845] HOME=/ [ 1.335848] TERM=linux [ 1.335849] syntec_extend= [ 1.427296] systemd[1]: System time before build time, advancing clock. [ 1.465863] NET: Registered PF_INET6 protocol family [ 1.467088] Segment Routing with IPv6 [ 1.467120] In-situ OAM (IOAM) with IPv6 [ 1.512199] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 1.512781] systemd[1]: Detected architecture arm64. [ 1.516021] systemd[1]: Hostname set to . [ 1.647979] systemd-sysv-generator[178]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 1.957915] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 1.960674] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 2.023442] systemd[1]: Queued start job for default target Graphical Interface. [ 2.026701] systemd[1]: Created slice Slice /system/modprobe. [ 2.028293] systemd[1]: Created slice Slice /system/serial-getty. [ 2.028841] systemd[1]: Created slice User and Session Slice. [ 2.029198] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 2.029417] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.029792] systemd[1]: Reached target Path Units. [ 2.029903] systemd[1]: Reached target Remote File Systems. [ 2.029982] systemd[1]: Reached target Slice Units. [ 2.030067] systemd[1]: Reached target Swaps. [ 2.034291] systemd[1]: Listening on RPCbind Server Activation Socket. [ 2.034462] systemd[1]: Reached target RPC Port Mapper. [ 2.040609] systemd[1]: Listening on Process Core Dump Socket. [ 2.041109] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 2.042010] systemd[1]: Listening on Journal Audit Socket. [ 2.042563] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.043128] systemd[1]: Listening on Journal Socket. [ 2.043914] systemd[1]: Listening on Network Service Netlink Socket. [ 2.045824] systemd[1]: Listening on udev Control Socket. [ 2.046361] systemd[1]: Listening on udev Kernel Socket. [ 2.046863] systemd[1]: Listening on User Database Manager Socket. [ 2.071517] systemd[1]: Mounting Huge Pages File System... [ 2.075613] systemd[1]: Mounting POSIX Message Queue File System... [ 2.080099] systemd[1]: Mounting Kernel Debug File System... [ 2.080949] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [ 2.082936] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 2.088499] systemd[1]: Mounting Temporary Directory /tmp... [ 2.094703] systemd[1]: Starting Create List of Static Device Nodes... [ 2.099802] systemd[1]: Starting Load Kernel Module configfs... [ 2.105077] systemd[1]: Starting Load Kernel Module drm... [ 2.110171] systemd[1]: Starting Load Kernel Module fuse... [ 2.116493] systemd[1]: Starting RPC Bind... [ 2.117098] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [ 2.118446] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 2.118466] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 2.122329] systemd[1]: Starting Journal Service... [ 2.123176] fuse: init (API version 7.37) [ 2.130576] systemd[1]: Starting Load Kernel Modules... [ 2.135620] systemd[1]: Starting Generate network units from Kernel command line... [ 2.140704] systemd[1]: Starting Remount Root and Kernel File Systems... [ 2.162489] systemd[1]: Starting Coldplug All udev Devices... [ 2.167570] systemd[1]: Starting Setup Virtual Console... [ 2.179463] systemd[1]: Started RPC Bind. [ 2.180567] systemd[1]: Mounted Huge Pages File System. [ 2.181578] systemd[1]: Mounted POSIX Message Queue File System. [ 2.182649] systemd[1]: Mounted Kernel Debug File System. [ 2.183510] systemd[1]: Mounted Temporary Directory /tmp. [ 2.185193] systemd[1]: Finished Create List of Static Device Nodes. [ 2.186908] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 2.187661] systemd[1]: Finished Load Kernel Module configfs. [ 2.189445] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 2.190298] systemd[1]: Finished Load Kernel Module drm. [ 2.192054] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 2.192663] systemd[1]: Finished Load Kernel Module fuse. [ 2.194233] systemd[1]: Finished Generate network units from Kernel command line. [ 2.206966] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [ 2.213770] cryptodev: loading out-of-tree module taints kernel. [ 2.218226] cryptodev: driver 1.12 loaded. [ 2.226906] systemd[1]: Mounting FUSE Control File System... [ 2.239671] systemd[1]: Mounting Kernel Configuration File System... [ 2.245692] systemd[1]: Finished Load Kernel Modules. [ 2.247437] systemd[1]: Finished Remount Root and Kernel File Systems. [ 2.249096] systemd[1]: Finished Setup Virtual Console. [ 2.250092] systemd[1]: Mounted FUSE Control File System. [ 2.253909] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [ 2.254234] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 2.258397] systemd[1]: Starting Apply Kernel Variables... [ 2.259014] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [ 2.263457] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.267892] systemd[1]: Mounted Kernel Configuration File System. [ 2.326086] systemd[1]: Started Journal Service. [ 2.372038] systemd-journald[189]: Received client request to flush runtime journal. [ 2.717823] random: crng init done [ 2.830295] spi_master spi1: GPIO lookup for consumer cs [ 2.830319] spi_master spi1: using device tree for GPIO lookup [ 2.830339] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [ 2.830383] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [ 2.830405] gpio gpiochip2: Persistence not supported for GPIO 16 [ 2.854115] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [ 2.854138] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [ 2.854175] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [ 2.854200] gpio gpiochip1: Persistence not supported for GPIO 5 [ 2.854218] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [ 2.854222] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [ 2.854234] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [ 2.854246] gpio gpiochip1: Persistence not supported for GPIO 4 [ 2.854253] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [ 2.854257] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [ 2.854267] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [ 2.854279] gpio gpiochip1: Persistence not supported for GPIO 6 [ 2.886508] spi_master spi2: GPIO lookup for consumer cs [ 2.886525] spi_master spi2: using device tree for GPIO lookup [ 2.886553] fram@0 enforce active low on chipselect handle [ 2.886555] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [ 2.886583] gpio gpiochip2: Persistence not supported for GPIO 13 [ 2.971113] mc: Linux media interface: v0.10 [ 2.987681] videodev: Linux video capture interface: v2.00 [ 3.004295] rtc-s35390a 1-0030: registered as rtc0 [ 3.005442] rtc-s35390a 1-0030: setting system clock to 2023-04-05T13:04:32 UTC (1680699872) [ 3.006373] systemd-journald[189]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [ 3.006402] systemd-journald[189]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [ 3.014435] systemd-journald[189]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [ 3.014472] systemd-journald[189]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [ 3.080486] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [ 3.082878] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [ 3.083055] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [ 3.083436] remoteproc remoteproc0: 5000000.m4fss is available [ 3.086977] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [ 3.087018] remoteproc remoteproc0: powering up 5000000.m4fss [ 3.087056] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [ 3.087064] remoteproc remoteproc0: request_firmware failed: -2 [ 3.292697] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [ 3.293439] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [ 3.293472] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [ 3.293478] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [ 3.293499] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [ 3.293520] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [ 3.293535] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [ 3.293541] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [ 3.309291] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [ 3.309573] platform 78000000.r5f: configured R5F for IPC-only mode [ 3.309826] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [ 3.310248] remoteproc remoteproc1: 78000000.r5f is available [ 3.310335] remoteproc remoteproc1: attaching to 78000000.r5f [ 3.329913] platform 78000000.r5f: R5F core initialized in IPC-only mode [ 3.329959] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [ 3.330888] virtio_rpmsg_bus virtio0: rpmsg host is online [ 3.330934] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [ 3.330942] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [ 3.334444] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [ 3.334766] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [ 3.347799] Init FPGA interrupt driver (1.0) [ 3.348337] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [ 3.348359] Get kick_gpio number= (418) [ 4.255676] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.342322] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.343869] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.343906] cfg80211: failed to load regulatory.db [ 4.495607] fm25_syntec spi2.0: GPIO lookup for consumer wp [ 4.495633] fm25_syntec spi2.0: using device tree for GPIO lookup [ 4.495650] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [ 4.495678] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [ 4.495698] fm25_syntec spi2.0: using lookup tables for GPIO lookup [ 4.495703] fm25_syntec spi2.0: No GPIO consumer wp found [ 4.576484] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [ 4.591781] remoteproc remoteproc2: 30074000.pru is available [ 4.606370] remoteproc remoteproc3: 30078000.pru is available [ 4.666557] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [ 4.666606] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [ 4.817603] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [ 4.817672] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [ 4.818880] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [ 4.821490] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [ 4.821510] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [ 4.829333] xhci-hcd xhci-hcd.4.auto: irq 465, io mem 0x31100000 [ 4.833375] hub 1-0:1.0: USB hub found [ 4.835409] hub 1-0:1.0: 1 port detected [ 5.076834] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 5.246267] hub 1-1:1.0: USB hub found [ 5.251150] hub 1-1:1.0: 4 ports detected [ 5.469592] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [ 5.533481] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [ 5.533527] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [ 5.678324] EXT4-fs (mmcblk0p1): recovery complete [ 5.678336] EXT4-fs (mmcblk0p2): recovery complete [ 5.678362] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [ 5.744390] EXT4-fs (mmcblk0p3): recovery complete [ 5.744487] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [ 5.935892] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [ 6.014219] EXT4-fs (mmcblk0p5): recovery complete [ 6.015199] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPL-3.0 packages: adwaita-icon-theme-symbolic bash cifs-utils dosfstools grub-common grub-editenv grub-efi less lib32-libgcc1 lib32-libstdc++6 libdw1 libelf1 libgcc1 libgdbm-compat4 libgdbm6 libgmp10 libidn2-0 libreadline8 libstdc++6 libunistring2 libvte-2.91-0 nettle onboard parted rxvt-unicode If you do not wish to distribute GPL-3.0 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *******[ 6.421354] EXT4-fs (mmcblk1p1): recovery complete [ 6.429077] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. ******************************************************** *************************************************************** WARNING: The runtime version supported by this application is unavailable. Using default runtime: v4.0.30319 WARNING: The runtime version supported by this application is unavailable. Using default runtime: v4.0.30319 _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project am62xx-evm - Arago 2023.10 am62xx-evm - am62xx-evm login: [ 11.850707] gpio gpiochip1: Persistence not supported for GPIO 7 [ 11.850834] gpio gpiochip1: registered chardev handle for line 7 [ 11.850859] gpio gpiochip1: registered chardev handle for 1 lines [ 11.850955] gpio gpiochip1: Persistence not supported for GPIO 8 [ 11.850961] gpio gpiochip1: registered chardev handle for line 8 [ 11.850969] gpio gpiochip1: registered chardev handle for 1 lines [ 11.851007] gpio gpiochip1: Persistence not supported for GPIO 9 [ 11.851012] gpio gpiochip1: registered chardev handle for line 9 [ 11.851019] gpio gpiochip1: registered chardev handle for 1 lines [ 11.851056] gpio gpiochip1: Persistence not supported for GPIO 10 [ 11.851061] gpio gpiochip1: registered chardev handle for line 10 [ 11.851069] gpio gpiochip1: registered chardev handle for 1 lines [ 11.851107] gpio gpiochip1: Persistence not supported for GPIO 11 [ 11.851112] gpio gpiochip1: registered chardev handle for line 11 [ 11.851119] gpio gpiochip1: registered chardev handle for 1 lines [ 11.851153] gpio gpiochip1: Persistence not supported for GPIO 12 [ 11.851157] gpio gpiochip1: registered chardev handle for line 12 [ 11.851165] gpio gpiochip1: registered chardev handle for 1 lines [ 11.851202] gpio gpiochip1: Persistence not supported for GPIO 13 [ 11.851206] gpio gpiochip1: registered chardev handle for line 13 [ 11.851213] gpio gpiochip1: registered chardev handle for 1 lines [ 11.851251] gpio gpiochip1: Persistence not supported for GPIO 14 [ 11.851257] gpio gpiochip1: registered chardev handle for line 14 [ 11.851263] gpio gpiochip1: registered chardev handle for 1 lines [ 14.155941] gpio gpiochip1: Persistence not supported for GPIO 7 [ 14.155967] gpio gpiochip1: registered chardev handle for line 7 [ 14.155983] gpio gpiochip1: registered chardev handle for 1 lines [ 14.156036] gpio gpiochip1: Persistence not supported for GPIO 8 [ 14.156041] gpio gpiochip1: registered chardev handle for line 8 [ 14.156048] gpio gpiochip1: registered chardev handle for 1 lines [ 14.156082] gpio gpiochip1: Persistence not supported for GPIO 9 [ 14.156087] gpio gpiochip1: registered chardev handle for line 9 [ 14.156094] gpio gpiochip1: registered chardev handle for 1 lines [ 14.156129] gpio gpiochip1: Persistence not supported for GPIO 10 [ 14.156134] gpio gpiochip1: registered chardev handle for line 10 [ 14.156141] gpio gpiochip1: registered chardev handle for 1 lines [ 14.156174] gpio gpiochip1: Persistence not supported for GPIO 11 [ 14.156181] gpio gpiochip1: registered chardev handle for line 11 [ 14.156188] gpio gpiochip1: registered chardev handle for 1 lines [ 14.156221] gpio gpiochip1: Persistence not supported for GPIO 12 [ 14.156226] gpio gpiochip1: registered chardev handle for line 12 [ 14.156233] gpio gpiochip1: registered chardev handle for 1 lines [ 14.156267] gpio gpiochip1: Persistence not supported for GPIO 13 [ 14.156272] gpio gpiochip1: registered chardev handle for line 13 [ 14.156278] gpio gpiochip1: registered chardev handle for 1 lines [ 14.156311] gpio gpiochip1: Persistence not supported for GPIO 14 [ 14.156317] gpio gpiochip1: registered chardev handle for line 14 [ 14.156323] gpio gpiochip1: registered chardev handle for 1 lines [ 14.642976] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager WARNING: The runtime version supported by this application is unavailable. Using default runtime: v4.0.30319 [ 19.765314] gpio gpiochip1: Persistence not supported for GPIO 7 [ 19.765336] gpio gpiochip1: registered chardev handle for line 7 [ 19.765360] gpio gpiochip1: registered chardev handle for 1 lines [ 19.765414] gpio gpiochip1: Persistence not supported for GPIO 8 [ 19.765420] gpio gpiochip1: registered chardev handle for line 8 [ 19.765427] gpio gpiochip1: registered chardev handle for 1 lines [ 19.765462] gpio gpiochip1: Persistence not supported for GPIO 9 [ 19.765468] gpio gpiochip1: registered chardev handle for line 9 [ 19.765474] gpio gpiochip1: registered chardev handle for 1 lines [ 19.765513] gpio gpiochip1: Persistence not supported for GPIO 10 [ 19.765519] gpio gpiochip1: registered chardev handle for line 10 [ 19.765525] gpio gpiochip1: registered chardev handle for 1 lines [ 19.765562] gpio gpiochip1: Persistence not supported for GPIO 11 [ 19.765568] gpio gpiochip1: registered chardev handle for line 11 [ 19.765575] gpio gpiochip1: registered chardev handle for 1 lines [ 19.765610] gpio gpiochip1: Persistence not supported for GPIO 12 [ 19.765615] gpio gpiochip1: registered chardev handle for line 12 [ 19.765622] gpio gpiochip1: registered chardev handle for 1 lines [ 19.765658] gpio gpiochip1: Persistence not supported for GPIO 13 [ 19.765663] gpio gpiochip1: registered chardev handle for line 13 [ 19.765670] gpio gpiochip1: registered chardev handle for 1 lines [ 19.765704] gpio gpiochip1: Persistence not supported for GPIO 14 [ 19.765709] gpio gpiochip1: registered chardev handle for line 14 [ 19.765716] gpio gpiochip1: registered chardev handle for 1 lines [ 19.846360] gpio gpiochip1: Persistence not supported for GPIO 7 [ 19.846385] gpio gpiochip1: registered chardev handle for line 7 [ 19.846413] gpio gpiochip1: registered chardev handle for 1 lines [ 19.846503] gpio gpiochip1: Persistence not supported for GPIO 8 [ 19.846509] gpio gpiochip1: registered chardev handle for line 8 [ 19.846518] gpio gpiochip1: registered chardev handle for 1 lines [ 19.846558] gpio gpiochip1: Persistence not supported for GPIO 9 [ 19.846563] gpio gpiochip1: registered chardev handle for line 9 [ 19.846570] gpio gpiochip1: registered chardev handle for 1 lines [ 19.846606] gpio gpiochip1: Persistence not supported for GPIO 10 [ 19.846611] gpio gpiochip1: registered chardev handle for line 10 [ 19.846619] gpio gpiochip1: registered chardev handle for 1 lines [ 19.846654] gpio gpiochip1: Persistence not supported for GPIO 11 [ 19.846660] gpio gpiochip1: registered chardev handle for line 11 [ 19.846666] gpio gpiochip1: registered chardev handle for 1 lines [ 19.846708] gpio gpiochip1: Persistence not supported for GPIO 12 [ 19.846712] gpio gpiochip1: registered chardev handle for line 12 [ 19.846719] gpio gpiochip1: registered chardev handle for 1 lines [ 19.847085] gpio gpiochip1: Persistence not supported for GPIO 13 [ 19.847099] gpio gpiochip1: registered chardev handle for line 13 [ 19.847116] gpio gpiochip1: registered chardev handle for 1 lines [ 19.847174] gpio gpiochip1: Persistence not supported for GPIO 14 [ 19.847179] gpio gpiochip1: registered chardev handle for line 14 [ 19.847187] gpio gpiochip1: registered chardev handle for 1 lines U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') SPL initial stack usage: 13384 bytes Trying to boot from MMC1 Authentication passed Authentication passed Authentication passed Authentication passed Authentication passed Starting ATF on ARM64 core... NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty