U-Boot 2016.05-g6c5519b6fc (Dec 14 2016 - 19:14:27 -0500) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black Watchdog enabled DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment not set. Validating first E-fuse MAC Net: eth0: ethernet@4a100000 Warning: usb_ether MAC addresses don't match: Address in SROM is de:ad:be:ef:00:01 Address in environment is a0:f6:fd:63:a6:4d , eth1: usb_ether Press SPACE to abort autoboot in 2 seconds switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt ** Unable to read file uEnv.txt ** switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3576864 bytes read in 266 ms (12.8 MiB/s) 36630 bytes read in 59 ms (605.5 KiB/s) Kernel image @ 0x82000000 [ 0x000000 - 0x369420 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8fff4000, end 8fffff15 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.32-gadde2ca9f8 (canary@canary-OptiPlex-3040) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #54 PREEM7 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone Black [ 0.000000] cma: Reserved 48 MiB at 0x9d000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon ) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=PARTUUID=000c0d1a-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 459668K/524288K available (6723K kernel code, 366K rwdata, 2496K rodata, 272K init, 265K bss, 15468K reserved, 49152K c) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0909004 (9221 kB) [ 0.000000] .init : 0xc090a000 - 0xc094e000 ( 272 kB) [ 0.000000] .data : 0xc094e000 - 0xc09a9a40 ( 367 kB) [ 0.000000] .bss : 0xc09a9a40 - 0xc09ec158 ( 266 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000014] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000032] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000042] OMAP clocksource: timer1 at 24000000 Hz [ 0.000177] clocksource_probe: no matching clocksources found [ 0.000335] Console: colour dummy device 80x30 [ 0.000357] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000362] This ensures that you still see kernel messages. Please [ 0.000366] update your kernel commandline. [ 0.000383] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) [ 0.089261] pid_max: default: 32768 minimum: 301 [ 0.089372] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.089381] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.089987] Initializing cgroup subsys io [ 0.090015] Initializing cgroup subsys memory [ 0.090049] Initializing cgroup subsys devices [ 0.090062] Initializing cgroup subsys freezer [ 0.090076] Initializing cgroup subsys perf_event [ 0.090086] Initializing cgroup subsys pids [ 0.090111] CPU: Testing write buffer coherency: ok [ 0.090466] Setting up static identity map for 0x80008200 - 0x80008258 [ 0.094244] devtmpfs: initialized [ 0.104161] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.117136] omap_hwmod: debugss: _wait_target_disable failed [ 0.171938] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.175474] pinctrl core: initialized pinctrl subsystem [ 0.176653] NET: Registered protocol family 16 [ 0.178495] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.209252] cpuidle: using governor ladder [ 0.239241] cpuidle: using governor menu [ 0.243026] OMAP GPIO hardware version 0.1 [ 0.251180] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.286260] edma 49000000.edma: TI EDMA DMA engine driver [ 0.289393] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring e [ 0.289448] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring e [ 0.289556] media: Linux media interface: v0.10 [ 0.289611] Linux video capture interface: v2.00 [ 0.289654] pps_core: LinuxPPS API ver. 1 registered [ 0.289660] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.289684] PTP clock support registered [ 0.289741] EDAC MC: Ver: 3.0.0 [ 0.290742] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.291026] Advanced Linux Sound Architecture Driver Initialized. [ 0.292036] clocksource: Switched to clocksource timer1 [ 0.301157] NET: Registered protocol family 2 [ 0.301844] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.301887] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.301924] TCP: Hash tables configured (established 4096 bind 4096) [ 0.301993] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.302009] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.302208] NET: Registered protocol family 1 [ 0.302574] RPC: Registered named UNIX socket transport module. [ 0.302587] RPC: Registered udp transport module. [ 0.302592] RPC: Registered tcp transport module. [ 0.302598] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.303432] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.305033] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.311832] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.312833] NFS: Registering the id_resolver key type [ 0.312898] Key type id_resolver registered [ 0.312906] Key type id_legacy registered [ 0.312968] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.316128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.316154] io scheduler noop registered [ 0.316165] io scheduler deadline registered [ 0.316299] io scheduler cfq registered (default) [ 0.317417] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.369809] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.373500] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250 [ 0.982019] console [ttyS0] enabled [ 0.986388] [drm] Initialized drm 1.1.0 20060810 [ 0.997301] loop: module loaded [ 1.002576] libphy: Fixed MDIO Bus: probed [ 1.072088] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.078225] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.085320] libphy: 4a101000.mdio: probed [ 1.089360] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 1.099263] cpsw 4a100000.ethernet: Detected MACID = a0:f6:fd:63:a6:4b [ 1.106045] cpsw 4a100000.ethernet: cpts: overflow check period 850 [ 1.113988] mousedev: PS/2 mouse device common for all mice [ 1.120135] i2c /dev entries driver [ 1.124620] cpuidle: enable-method property 'ti,am3352' found operations [ 1.132019] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.213386] ledtrig-cpu: registered to indicate activity on CPUs [ 1.221817] NET: Registered protocol family 10 [ 1.227727] sit: IPv6 over IPv4 tunneling driver [ 1.233176] NET: Registered protocol family 17 [ 1.237927] Key type dns_resolver registered [ 1.242546] omap_voltage_late_init: Voltage driver support not added [ 1.260735] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.275014] mmc0: new high speed SDHC card at address aaaa [ 1.281782] mmcblk0: mmc0:aaaa SS08G 7.40 GiB [ 1.289530] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.295046] mmcblk0: p1 p2 [ 1.298504] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.306018] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.316075] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.323311] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.330427] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.337592] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.344749] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.355761] hctosys: unable to open rtc device (rtc0) [ 1.364206] ALSA device list: [ 1.367213] No soundcards found. [ 1.387880] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.396196] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.402307] mmc1: MAN_BKOPS_EN bit is not set [ 1.412340] devtmpfs: mounted [ 1.415682] Freeing unused kernel memory: 272K (c090a000 - c094e000) [ 1.422304] mmc1: new high speed MMC card at address 0001 [ 1.428107] This architecture does not have kernel memory protection. [ 1.434913] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.440342] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.446710] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.454163] mmcblk1: p1 p2 [ 1.740350] systemd[1]: System time before build time, advancing clock. [ 1.809334] random: systemd: uninitialized urandom read (16 bytes read, 16 bits of entropy available) [ 1.827576] random: systemd: uninitialized urandom read (16 bytes read, 16 bits of entropy available) [ 1.855346] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCR) [ 1.874419] systemd[1]: Detected architecture arm. Welcome to Arago 2016.10! [ 1.906655] systemd[1]: Set hostname to . [ 2.024384] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 20 bits of entropy available) [ 2.035555] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 20 bits of entropy available) [ 2.046681] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 20 bits of entropy available) [ 2.067254] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 20 bits of entropy available) [ 2.090876] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 2.189827] random: systemd: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 2.199955] random: systemd: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 2.211085] random: systemd: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 2.565009] systemd[1]: [/lib/systemd/system/gadget-init.service:15] Unknown lvalue 'ExecStopPre' in section 'Service' [ 2.888194] systemd[1]: basic.target: Found ordering cycle on basic.target/start [ 2.896149] systemd[1]: basic.target: Found dependency on sockets.target/start [ 2.903702] systemd[1]: basic.target: Found dependency on rpcbind.socket/start [ 2.911019] systemd[1]: basic.target: Found dependency on sysinit.target/start [ 2.918392] systemd[1]: basic.target: Found dependency on alignment.service/start [ 2.926288] systemd[1]: basic.target: Found dependency on basic.target/start [ 2.933695] systemd[1]: basic.target: Breaking ordering cycle by deleting job sockets.target/start [ 2.942810] systemd[1]: sockets.target: Job sockets.target/start deleted to break ordering cycle starting with basic.target/start [ SKIP ] Ordering cycle found, skipping Sockets [ 2.972713] systemd[1]: alignment.service: Found ordering cycle on alignment.service/start [ 2.981055] systemd[1]: alignment.service: Found dependency on sysinit.target/start [ 2.988857] systemd[1]: alignment.service: Found dependency on alignment.service/start [ 2.996878] systemd[1]: alignment.service: Breaking ordering cycle by deleting job alignment.service/start [ 3.006633] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with alignment.service/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 3.048272] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 3.072816] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 3.102840] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 3.132446] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 3.153019] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 3.211795] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 3.246740] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 3.285067] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 3.337738] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 3.384898] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 3.461053] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 3.479603] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 3.517714] cryptodev: driver 1.8 loaded. [ 3.538006] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 3.573016] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 3.617923] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 3.652959] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 3.686768] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 3.714263] systemd[1]: Created slice system-getty.slice. [ 3.761606] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ OK ] Created slice system-getty.slice. [ 3.797008] systemd[1]: Starting Journal Service... Starting Journal Service... [ 3.833878] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 3.848080] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 3.872920] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 3.902691] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 3.922995] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 3.942745] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 4.010321] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 4.032676] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 4.062559] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 4.093242] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Started Setup Virtual Console. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Load Kernel Modules. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... Starting Flush Journal to Persistent Storage... [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ 5.501370] systemd-journald[105]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started udev Coldplug all Devices. [ 6.835265] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ 6.909209] 47401300.usb-phy supply vcc not found, using dummy regulator Starting Load/Save Random Seed... [ 7.014297] 47401b00.usb-phy supply vcc not found, using dummy regulator [ 7.214208] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Volatile Files and Directories. [ OK ] Found device /dev/ttyS0. [ 7.440524] ******The i2c_client name is saf775x [ 7.509019] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 7.531190] Memory is allocated [ 7.543710] ****After Regmap********** [ 7.900498] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 8.116411] remoteproc0: wkup_m3 is available [ 8.142345] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 8.151374] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 8.691573] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ 9.179191] [drm] Initialized pvr 1.14.3699939 20110701 on minor 0 [ 9.232623] ti-pruss 4a300000.pruss: creating PRU cores and other child platform devices [ 9.281510] remoteproc0: powering up wkup_m3 [ OK ] Started Network Time Synchronization. [ 9.329001] irq: no irq domain found for /ocp/pruss@4a300000/intc@4a320000 ! [ 9.365399] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217280 [ 9.469633] remoteproc0: remote processor wkup_m3 is now up [ 9.469664] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192 [ 9.528083] irq: no irq domain found for /ocp/pruss@4a300000/intc@4a320000 ! [ 9.618151] PM: bootloader does not support rtc-only! [ 9.668710] remoteproc1: 4a334000.pru0 is available [ 9.709838] *****Value of bit1 : 0 [ 9.767878] *****Value of frame1 : 0 [ 9.771601] *****Value of format : 1001 [ 9.789724] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 9.862931] ***Inside Codec probe*** [ 9.879828] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 9.908498] asoc-simple-card sound: saf775x-codec <-> 48038000.mcasp mapping ok [ 10.022772] remoteproc1: registered virtio0 (type 7) [ 10.092326] pru-rproc 4a334000.pru0: PRU rproc node /ocp/pruss@4a300000/pru0@4a334000 probed successfully [ 10.107893] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 10.172753] remoteproc2: 4a338000.pru1 is available [ 10.177764] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 10.219615] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 10.386219] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 10.547570] remoteproc2: registered virtio1 (type 7) [ 10.555282] EXT4-fs (mmcblk1p2): recovery complete [ 10.560129] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 10.592582] pru-rproc 4a338000.pru1: PRU rproc node /ocp/pruss@4a300000/pru1@4a338000 probed successfully [ OK ] Found device /dev/ttyS3. [ OK ] Started Update UTMP about System Boot/Shutdown. [ 11.282156] random: nonblocking pool is initialized [ OK ] Found device /dev/mmcblk0p1. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting Synchronize System and HW clocks... [ OK ] Reached target System Time Synchronized. [ OK ] Started Synchronize System and HW clocks. [ 13.013906] usbcore: registered new interface driver usbfs [ 13.019510] usbcore: registered new interface driver hub [ 13.088005] usbcore: registered new device driver usb [ 13.283167] remoteproc1: powering up 4a334000.pru0 [ 13.305598] remoteproc1: Booting fw image am335x-pru0-fw, size 75576 [ 13.323635] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 13.342782] ti-pruss 4a300000.pruss: configured system_events = 0x0000000000030000 intr_channels = 0x00000005 host_intr = 0x00000005 [ 13.358096] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 13.394480] hub 1-0:1.0: USB hub found [ 13.398558] remoteproc1: remote processor 4a334000.pru0 is now up [ 13.406711] hub 1-0:1.0: 1 port detected [ 13.411504] virtio_rpmsg_bus virtio0: creating channel rpmsg-pru addr 0x1e [ 13.422322] virtio_rpmsg_bus virtio0: rpmsg host is online [ 13.442736] remoteproc2: powering up 4a338000.pru1 [ 13.448172] remoteproc2: Booting fw image am335x-pru1-fw, size 75576 [ 13.497680] ti-pruss 4a300000.pruss: configured system_events = 0x00000000000c0000 intr_channels = 0x0000000a host_intr = 0x0000000a [ 13.557896] remoteproc2: remote processor 4a338000.pru1 is now up [ 13.566102] virtio_rpmsg_bus virtio1: creating channel rpmsg-pru addr 0x1f [ 13.575796] virtio_rpmsg_bus virtio1: rpmsg host is online [ 13.651314] rpmsg_pru rpmsg0: new rpmsg_pru device: /dev/rpmsg_pru30 [ 13.670323] rpmsg_pru rpmsg1: new rpmsg_pru device: /dev/rpmsg_pru31 [ OK ] Reached target Sound Card. [ OK ] Reached target System Initialization. [ OK ] Listening on dropbear.socket. [ OK ] Reached target Basic System. Starting Start USB gadget... Starting uim-sysfs.service... Starting Print notice about GPLv3 packages... [ OK ] Started System Logging Service. Starting Permit User Sessions... Starting Save/Restore Sound Card State... [ OK ] Started Kernel Logging Service. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started D-Bus System Message Bus. [ 14.860714] using random self ethernet address [ 14.877253] using random host ethernet address [ 14.881755] using host ethernet address: A0:F6:FD:63:A6:4D [ 14.942896] using random self ethernet address [ 14.967302] using random host ethernet address [ 14.994314] using host ethernet address: A0:F6:FD:63:A6:4D [ 15.039530] usb0: HOST MAC a0:f6:fd:63:a6:4d [ 15.083826] usb0: MAC 3a:13:fc:72:4c:64 [ OK ] Started Avahi mDNS/DNS-SD Stack. Starting Network Service... Starting Telephony service... [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ 15.248303] Mass Storage Function, version: 2009/09/11 [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. [ 15.292810] LUN: removable file: (no medium) [ 15.351759] LUN: removable read only file: /dev/mmcblk0p1 Starting Login Service... [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Started Permit User Sessions. [ 15.433996] Number of LUNs=1 [ 15.469560] g_multi gadget: Multifunction Composite Gadget [ OK ] Started Save/Restore Sound Card State. [ 15.556501] g_multi gadget: g_multi ready [ 15.659310] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ OK ] Started Network Service. [ OK ] Found device /dev/ttyGS0. [ 15.833826] net eth0: initializing cpsw version 1.12 (0) [ 15.868049] net eth0: initialized cpsw ale version 1.4 [ 15.897930] net eth0: ALE Table size 1024 [ 15.941539] net eth0: phy found : id is : 0x7c0f1 [ 15.969210] libphy: PHY 4a101000.mdio:01 not found [ 15.994927] net eth0: phy "4a101000.mdio:01" not found on slave 1, err -19 [ 16.114630] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.123797] Bluetooth: Core ver 2.21 [ 16.172398] NET: Registered protocol family 31 [ 16.176890] Bluetooth: HCI device and connection manager initialized [ 16.285511] Bluetooth: HCI socket layer initialized [ 16.312953] Bluetooth: L2CAP socket layer initialized [ 16.360490] NET: Registered protocol family 15 [ 16.370388] Bluetooth: SCO socket layer initialized [ OK ] Started Start USB gadget. [ 17.274725] Initializing XFRM netlink socket [ OK ] Started Telephony service. [ OK ] Started Login Service. Mounting Configuration File System... [ OK ] Reached target Network. Starting Network Name Resolution... Starting Lightning Fast Webserver With Light System Requirements... [ OK ] Started Serial Getty on ttyS3. [ OK ] Started Serial Getty on ttyGS0. [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Mounted Configuration File System. [ OK ] Started Network Name Resolution. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started uim-sysfs.service. Starting rc.pvr.service... [ 21.646473] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ OK ] Started rc.pvr.service. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils bison-dev bison cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbserver gstreamer1.0-libav hidapi libcairo-perf-utils libgmp10 libidn11 libmpc3 libmpfr4 m4-dev m4 make nettle swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** Starting weston.service... [ OK ] Started Print notice about GPLv3 packages. [ OK ] Started weston.service. Starting telnetd.service... [ OK ] Started telnetd.service. Starting thttpd.service... Starting busybox-udhcpd.service... [ OK ] Started busybox-udhcpd.service. [ OK ] Started thttpd.service. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting matrix-gui-2.0.service... [ OK ] Started matrix-gui-2.0.service. Starting thermal-zone-init.service... Starting parse-ip.service... [ OK ] Started thermal-zone-init.service. [ OK ] Started parse-ip.service. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am335x-evm ttyS0 Arago 2016.10 am335x-evm ttyS0 am335x-evm login: _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am335x-evm ttyS0 Arago 2016.10 am335x-evm ttyS0 am335x-evm login: _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am335x-evm ttyS0 Arago 2016.10 am335x-evm ttyS0 am335x-evm login: _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am335x-evm ttyS0 Arago 2016.10 am335x-evm ttyS0 am335x-evm login: root root@am335x-evm:~# echo 8 > /proc/sys/kernel/printk root@am335x-evm:~# cd /sys/class/gpio/ root@am335x-evm:/sys/class/gpio# echo 59 > export root@am335x-evm:/sys/class/gpio# echo out > direction -sh: direction: Permission denied root@am335x-evm:/sys/class/gpio# echo out > direction root@am335x-evm:/sys/class/gpio# cd gpio59 root@am335x-evm:/sys/class/gpio/gpio59# echo out > direction root@am335x-evm:/sys/class/gpio/gpio59# echo 1 > value root@am335x-evm:/sys/class/gpio/gpio59# cd root@am335x-evm:~# cd /bin/ root@am335x-evm:/bin# ls Tum_Hi_Ho.wav kill.procps rm ash kill.util-linux rmdir audiocheck1_10th_copy_converted.wav kmod run-parts bash ln sed busybox login sh busybox.nosuid login.shadow sleep busybox.suid loginctl stat cat ls stty chattr lsmod su chattr.e2fsprogs lsmod.kmod su.shadow chgrp machinectl su.util-linux chmod mkdir sync chown mknod systemctl cp mktemp systemd-ask-password cpio more systemd-escape date more.util-linux systemd-firstboot dd mount systemd-hwdb df mount.util-linux systemd-inhibit dmesg mountpoint systemd-machine-id-setup dmesg.util-linux mountpoint.util-linux systemd-notify dnsdomainname mpstat systemd-tmpfiles dumpkmap mv systemd-tty-ask-password-agent echo netstat tar egrep networkctl touch false nice true fatattr piano2.wav udevadm fgrep pidof umount getopt pidof.procps umount.util-linux grep ping uname gunzip ping6 usleep gzip ps vi hostname ps.procps watch journalctl pwd watch.procps kill rev zcat root@am335x-evm:/bin# aplay pi piano2.wav pidof pidof.procps ping ping6 root@am335x-evm:/bin# aplay pi piano2.wav pidof pidof.procps ping ping6 root@am335x-evm:/bin# aplay piano2.wav Playing WAVE 'piano2.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo root@am335x-evm:/bin# aplay piano2.wav Playing WAVE 'piano2.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo root@am335x-evm:/bin# root@am335x-evm:/bin# root@am335x-evm:/bin# root@am335x-evm:/bin# dmesg -n 8 root@am335x-evm:/bin# aplay piano2.wav Playing WAVE 'piano2.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo root@am335x-evm:/bin# aplay audiocheck1_10th_copy_converted.wav Playing WAVE 'audiocheck1_10th_copy_converted.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo root@am335x-evm:/bin# aplay audiocheck1_10th_copy_converted.wav Playing WAVE 'audiocheck1_10th_copy_converted.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo root@am335x-evm:/bin# aplay audiocheck1_10th_copy_converted.wav Playing WAVE 'audiocheck1_10th_copy_converted.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo root@am335x-evm:/bin# aplay audiocheck1_10th_copy_converted.wav Playing WAVE 'audiocheck1_10th_copy_converted.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo root@am335x-evm:/bin# aplay piano2.wav Playing WAVE 'piano2.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo root@am335x-evm:/bin# aplay piano2.wav Playing WAVE 'piano2.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo root@am335x-evm:/bin# aplay piano2.wav Playing WAVE 'piano2.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo root@am335x-evm:/bin# aplay audiocheck1_10th_copy_converted.wav Playing WAVE 'audiocheck1_10th_copy_converted.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo