Sciclient_pmGetModuleClkFreq, DevId 0xca @ 2000000000Hz...
CTRLMMR_WKUP_MAIN_PLL8_CLKSEL Register Value = 0x800000
BYPASS_SW_OVRD Field Value = 0x0
BYP_WARM_RST Field Value = 0x1
CLK_SEL Field Value = 0x0
PLL8_FREQ_CTRL0 Register Value = 0x68
FB_DIV_INT Field Value = 0x68
PLL8_FREQ_CTRL1 Register Value = 0x2aaaab
FB_DIV_FRAC Field Value = 0x2aaaab
PLL8_DIV_CTRL Register Value = 0x1020001
POST_DIV2 Field Value = 0x1
POST_DIV1 Field Value = 0x2
REF_DIV Field Value = 0x1
PLL8_SS_CTRL Register Value = 0x80000001
BYPASS_EN Field Value = 0x1
WV_TBLE_MAXADDR Field Value = 0x0
RESET Field Value = 0x0
DOWNSPREAD_EN Field Value = 0x0
WAVE_SEL Field Value = 0x1
PLL8_SS_SPREAD Value = 0x10001
MOD_DIV Field Value = 0x1
SPREAD Field Value = 0x1
PLL8_HSDIV_CTRL0 Register Value = 0x8000
RESET Field Value = 0x0
CLKOUT_EN Field Value = 0x1
SYNC_DIS Field Value = 0x0
HSDIV Field Value = 0x0

*********************************************
*                 UART Test                 *
*********************************************

Testing UART print to console at 115.2k baud rate
Press 'y' to verify pass: