U-Boot SPL 2021.01-g731e98bc (Feb 20 2024 - 15:37:07 -0800) SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar') SPL initial stack usage: 13424 bytes Trying to boot from MMC1 Authentication passed Authentication passed Authentication passed Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices Loading Environment from MMC... OK init_env from device 9 not supported! Starting ATF on ARM64 core... NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb3-dirty NOTICE: BL31: Built : 05:33:19, Feb 24 2023 U-Boot SPL 2021.01-g9f752f37-dirty (Mar 21 2024 - 09:52:10 -0700) SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar') Trying to boot from MMC1 Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices U-Boot 2021.01-g9f752f37-dirty (Mar 21 2024 - 09:52:10 -0700) SoC: AM62X SR1.0 HS-FS Model: Texas Instruments AM625 SK EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 DRAM: 2 GiB MMC: mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2 Loading Environment from MMC... OK In: serial@2800000 Out: serial@2800000 Err: serial@2800000 EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed 1 Net: get_phy_id(): Low bytes = 0x600d, High bytes = 0x8585 Got PHY ID: 0x600d8585 get_phy_driver(): Phy ID = 0x600d8585 Configuring BCM54220S. BCM54220S non-copper mode 4 detected. Manually reconfiguring to copper. eth0: ethernet@8000000port@1 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 Failed to load 'boot.scr' ** Unrecognized filesystem type ** 19862020 bytes read in 169 ms (112.1 MiB/s) 36269 bytes read in 3 ms (11.5 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 000000008fef4000, end 000000008fffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.10.168-rt83-qsc-t008 (qsc@qsc-Virtual-Machine) (aarch64-linux-gnu-gcc (GCC) 9.4.0, GNU ld (GNU Binutils) 2.36.1) #21 SMP PREEMPT_RT Tue Apr 2 11:42:01 PDT 2024 [ 0.000000] Machine model: NGCXQ Amplifier [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] On node 0 totalpages: 524288 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 524288 pages, LIFO batch:63 [ 0.000000] cma: Reserved 512 MiB at 0x00000000dd000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 18 pages/cpu s35392 r8192 d30144 u73728 [ 0.000000] pcpu-alloc: s35392 r8192 d30144 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=PARTUUID=6746d81c-d315-4160-9201-db9e94ded876 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1455424K/2097152K available (11264K kernel code, 1220K rwdata, 4328K rodata, 2496K init, 438K bss, 117440K reserved, 524288K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000001] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.008479] Console: colour dummy device 80x25 [ 0.013075] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.023756] pid_max: default: 32768 minimum: 301 [ 0.028572] LSM: Security Framework initializing [ 0.033368] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.040950] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.050866] rcu: Hierarchical SRCU implementation. [ 0.056302] Platform MSI: msi-controller@1820000 domain created [ 0.062616] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [ 0.071869] EFI services will not be available. [ 0.076709] smp: Bringing up secondary CPUs ... [ 0.082137] Detected VIPT I-cache on CPU1 [ 0.086269] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [ 0.093306] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [ 0.100743] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.107543] smp: Brought up 1 node, 2 CPUs [ 0.111765] SMP: Total of 2 processors activated. [ 0.116585] CPU features: detected: 32-bit EL0 Support [ 0.121849] CPU features: detected: CRC32 instructions [ 0.134388] CPU: All CPU(s) started at EL2 [ 0.138593] alternatives: patching kernel code [ 0.144259] devtmpfs: initialized [ 0.153784] KASLR disabled due to lack of seed [ 0.158536] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.168516] futex hash table entries: 512 (order: 4, 65536 bytes, linear) [ 0.189980] pinctrl core: initialized pinctrl subsystem [ 0.195972] DMI not present or invalid. [ 0.200608] NET: Registered protocol family 16 [ 0.207080] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.214460] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.222558] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.231324] thermal_sys: Registered thermal governor 'step_wise' [ 0.231904] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.245067] ASID allocator initialised with 65536 entries [ 0.273959] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.280893] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.287764] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.294628] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.302590] cryptd: max_cpu_qlen set to 1000 [ 0.310105] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [ 0.319217] vcc_5v0: supplied by vmain_pd [ 0.323738] vcc_3v3_sys: supplied by vmain_pd [ 0.328976] vcc_1v8: supplied by vcc_3v3_sys [ 0.334311] iommu: Default domain type: Translated [ 0.339751] SCSI subsystem initialized [ 0.344092] mc: Linux media interface: v0.10 [ 0.348495] videodev: Linux video capture interface: v2.00 [ 0.354201] pps_core: LinuxPPS API ver. 1 registered [ 0.359277] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.368629] PTP clock support registered [ 0.372668] EDAC MC: Ver: 3.0.0 [ 0.376619] omap-mailbox 29000000.mailbox: omap mailbox rev 0x66fc9100 [ 0.383839] FPGA manager framework [ 0.387457] Advanced Linux Sound Architecture Driver Initialized. [ 0.394625] clocksource: Switched to clocksource arch_sys_counter [ 0.401113] VFS: Disk quotas dquot_6.6.0 [ 0.405181] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.418292] NET: Registered protocol family 2 [ 0.423070] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.431974] tcp_listen_portaddr_hash hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.440793] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.449045] TCP bind hash table entries: 16384 (order: 7, 917504 bytes, linear) [ 0.457446] TCP: Hash tables configured (established 16384 bind 16384) [ 0.464540] UDP hash table entries: 1024 (order: 5, 131072 bytes, linear) [ 0.471666] UDP-Lite hash table entries: 1024 (order: 5, 131072 bytes, linear) [ 0.479439] NET: Registered protocol family 1 [ 0.484545] RPC: Registered named UNIX socket transport module. [ 0.490653] RPC: Registered udp transport module. [ 0.495463] RPC: Registered tcp transport module. [ 0.500271] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.506863] NET: Registered protocol family 44 [ 0.511423] PCI: CLS 0 bytes, default 64 [ 0.518275] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.530900] Initialise system trusted keyrings [ 0.535730] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.547506] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.554178] NFS: Registering the id_resolver key type [ 0.559421] Key type id_resolver registered [ 0.563710] Key type id_legacy registered [ 0.567905] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.574781] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.582638] fuse: init (API version 7.32) [ 0.586957] 9p: Installing v9fs 9p2000 file system support [ 0.627051] Key type asymmetric registered [ 0.631273] Asymmetric key parser 'x509' registered [ 0.636316] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) [ 0.643906] io scheduler mq-deadline registered [ 0.648539] io scheduler kyber registered [ 0.654922] pinctrl-single 4084000.pinctrl: 34 pins, size 136 [ 0.661297] pinctrl-single f4000.pinctrl: 171 pins, size 684 [ 0.675561] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.696036] brd: module loaded [ 0.707207] loop: module loaded [ 0.711461] megasas: 07.714.04.00-rc1 [ 0.719626] tun: Universal TUN/TAP device driver, 1.6 [ 0.725422] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.731870] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.737992] sky2: driver version 1.30 [ 0.742799] VFIO - User Level meta-driver version: 0.3 [ 0.749210] i2c /dev entries driver [ 0.753937] sdhci: Secure Digital Host Controller Interface driver [ 0.760286] sdhci: Copyright(c) Pierre Ossman [ 0.765066] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.772066] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.780319] optee: probing for conduit method. [ 0.784970] optee: revision 3.20 (8e74d476) [ 0.785270] optee: dynamic shared memory is enabled [ 0.794830] optee: initialized driver [ 0.800696] NET: Registered protocol family 17 [ 0.805494] 9pnet: Installing 9P2000 support [ 0.809955] Key type dns_resolver registered [ 0.814739] printk: bootconsole [ns16550a0]: printing thread started [ 0.814823] Loading compiled-in X.509 certificates [ 0.825138] ti-sci 44043000.system-controller: lpm region is required for suspend but not provided. [ 0.825225] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar') [ 0.885799] omap-gpmc 3b000000.memory-controller: GPMC revision 6.0 [ 0.885822] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.891503] omap_i2c 20000000.i2c: bus 3 rev0.12 at 400 kHz [ 0.892552] omap_i2c 20010000.i2c: bus 4 rev0.12 at 400 kHz [ H0.893790] omap_i2c 20020000.i2c: bus 2 rev0.12 at 400 kHz [ 0.894229] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created [ 0.917204] printk: console [ttyS2]: printing thread started [ 0.894382] ti-sci-intr bus@f0000:interrupt-controller@a00000: Interrupt Router 3 domain created [ 0.917225] printk: console [ttyS2] enabled [ 0.917229] printk: bootconsole [ns16550a0] disabled [ 0.940168] printk: bootconsole [ns16550a0]: printing thread stopped [ 0.963962] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [ 1.002635] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 1.004399] davinci_mdio 8000f00.mdio: phy[26]: device 8000f00.mdio:1a, driver Broadcom BCM54220S [ 1.004415] davinci_mdio 8000f00.mdio: phy[27]: device 8000f00.mdio:1b, driver Broadcom BCM54220S [ 1.004526] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [ 1.004782] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [ 1.004792] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [ 1.004799] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [ 1.005643] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [ 1.014438] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [ 1.018929] rtc-ti-k3 2b1f0000.rtc: registered as rtc0 [ 1.018977] rtc-ti-k3 2b1f0000.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2) [ 1.121713] mmc0: CQHCI version 5.10 [ 1.131319] debugfs: Directory 'pd:53' with parent 'pm_genpd' already present! [ 1.131376] debugfs: Directory 'pd:52' with parent 'pm_genpd' already present! [ 1.131418] debugfs: Directory 'pd:51' with parent 'pm_genpd' already present! [ 1.131861] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 1.142237] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.152919] ALSA device list: [ 1.152929] No soundcards found. [ 1.152998] Warning: unable to open an initial console. [ 1.172592] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [ 1.194198] . . . mmc_wait_for_req_done() - finished: err=0 retries=0 removed=0 [ 1.207029] . . . mmc_wait_for_req_done() - finished: err=0 retries=0 removed=0 [ 1.208525] . . . mmc_wait_for_req_done() - finished: err=0 retries=0 removed=0 [ 1.211382] . . . mmc_wait_for_req_done() - finished: err=0 retries=0 removed=0 [ 1.224199] . . . mmc_wait_for_req_done() - finished: err=0 retries=0 removed=0 [ 1.224723] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.225049] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.225625] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.225947] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.237055] . . . mmc_wait_for_req_done() - finished: err=0 retries=0 removed=0 [ 1.237074] . . __mmc_switch() mmc0: set=1, index=175, value=1, timeout_ms=250, timing=0, send_status=1, retry_crc_err=0) [ 1.237886] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.237890] . . __mmc_switch(): mmc_wait_for_cmd() returned error 0. Used r1b response? 1 [ 1.238192] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.238198] . . __mmc_switch() mmc0: set=1, index=34, value=1, timeout_ms=250, timing=0, send_status=1, retry_crc_err=0) [ 1.238805] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.238809] . . __mmc_switch(): mmc_wait_for_cmd() returned error 0. Used r1b response? 1 [ 1.239109] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.239114] mmc_select_hs200() [ 1.239119] . mmc_select_bus_width(): mmc_can_ext_csd() returned True. host->caps = 4000104b, idx=0 [ 1.239125] . . __mmc_switch() mmc0: set=1, index=183, value=2, timeout_ms=250, timing=0, send_status=1, retry_crc_err=0) [ 1.239495] mmc0: req failed (CMD6): -110, retrying... [ 1.239860] mmc0: req failed (CMD6): -110, retrying... [ 1.240223] mmc0: req failed (CMD6): -110, retrying... [ 1.240586] . . . mmc_wait_for_req_done() - finished: err=-110 retries=0 removed=0 [ 1.240590] . . __mmc_switch(): mmc_wait_for_cmd() returned error -110. Used r1b response? 1 [ 1.240594] . mmc_switch() returned error: -110, continuing. idx=0 [ 1.240596] . . __mmc_switch() mmc0: set=1, index=183, value=1, timeout_ms=250, timing=0, send_status=1, retry_crc_err=0) [ 1.240963] mmc0: req failed (CMD6): -110, retrying... [ 1.241325] mmc0: req failed (CMD6): -110, retrying... [ 1.241688] mmc0: req failed (CMD6): -110, retrying... [ 1.242051] . . . mmc_wait_for_req_done() - finished: err=-110 retries=0 removed=0 [ 1.242055] . . __mmc_switch(): mmc_wait_for_cmd() returned error -110. Used r1b response? 1 [ 1.242058] . mmc_switch() returned error: -110, continuing. idx=1 [ 1.247577] mmc0: mmc_select_hs200 failed, error -110 [ 1.247582] mmc_select_timing() -> Falling back to HS mode. [ 1.247585] . . __mmc_switch() mmc0: set=1, index=185, value=1, timeout_ms=250, timing=1, send_status=1, retry_crc_err=1) [ 1.248301] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.248305] . . __mmc_switch(): mmc_wait_for_cmd() returned error 0. Used r1b response? 1 [ 1.248669] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.248726] . mmc_select_bus_width(): mmc_can_ext_csd() returned True. host->caps = 4000104b, idx=0 [ 1.248729] . . __mmc_switch() mmc0: set=1, index=183, value=2, timeout_ms=250, timing=0, send_status=1, retry_crc_err=0) [ 1.248778] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.248783] . . __mmc_switch(): mmc_wait_for_cmd() returned error 0. Used r1b response? 1 [ 1.248809] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.248813] . mmc_switch() returned error: 0, continuing. idx=0 [ 1.249421] . . . mmc_wait_for_req_done() - finished: err=0 retries=0 removed=0 [ 1.249427] . . __mmc_switch() mmc0: set=1, index=183, value=6, timeout_ms=250, timing=8, send_status=1, retry_crc_err=1) [ 1.249815] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.249819] . . __mmc_switch(): mmc_wait_for_cmd() returned error 0. Used r1b response? 1 [ 1.249870] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.249876] . . __mmc_switch() mmc0: set=1, index=161, value=1, timeout_ms=250, timing=0, send_status=1, retry_crc_err=0) [ 1.250045] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.250049] . . __mmc_switch(): mmc_wait_for_cmd() returned error 0. Used r1b response? 1 [ 1.250072] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.250076] . . __mmc_switch() mmc0: set=1, index=33, value=1, timeout_ms=1600, timing=0, send_status=1, retry_crc_err=0) [ 1.250118] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.250122] . . __mmc_switch(): mmc_wait_for_cmd() returned error 0. Used r1b response? 1 [ 1.250144] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.250149] . . __mmc_switch() mmc0: set=1, index=15, value=1, timeout_ms=250, timing=0, send_status=1, retry_crc_err=0) [ 1.251019] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 1.251023] . . __mmc_switch(): mmc_wait_for_cmd() returned error 0. Used r1b response? 1 [ 1.251046] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 5.291839] . . __mmc_switch() mmc0: set=1, index=32, value=1, timeout_ms=30000, timing=0, send_status=1, retry_crc_err=0) [ 5.292657] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 [ 5.292662] . . __mmc_switch(): mmc_wait_for_cmd() returned error 0. Used r1b response? 1 [ 5.292690] . . . mmc_wait_for_req_done() - finished: err=0 retries=3 removed=0 starting pid 174, tty '': '/etc/rc.sysinit' Running rc.sysinit