Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 Failed to load 'boot.scr' 1011 bytes read in 33 ms (29.3 KiB/s) Loaded env from uEnv.txt Importing environment from mmc1 ... Running uenvcmd ... ## Error: "main_cpsw0_qsgmii_phyinit" not defined Failed to load '/lib/firmware/j722s-mcu-r5f0_0-fw' 887712 bytes read in 74 ms (11.4 MiB/s) Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices Load Remote Processor 2 with data@addr=0x82000000 887712 bytes: Success! 11722864 bytes read in 268 ms (41.7 MiB/s) Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices Load Remote Processor 3 with data@addr=0x82000000 11722864 bytes: Success! 11722864 bytes read in 268 ms (41.7 MiB/s) Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices Load Remote Processor 4 with data@addr=0x82000000 11722864 bytes: Success! 19376640 bytes read in 837 ms (22.1 MiB/s) 71313 bytes read in 38 ms (1.8 MiB/s) Working FDT set to 88000000 7405 bytes read in 36 ms (200.2 KiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 ERROR: reserving fdt memory region failed (addr=880000000 size=20000000 flags=4) Loading Device Tree to 000000008feeb000, end 000000008fffffff ... OK Working FDT set to 8feeb000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.80-ti-g2e423244f8c0 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Wed Mar 20 14:43:33 UTC 2024 [ 0.000000] Machine model: Texas Instruments J722S EVM [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a0000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a0100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a1000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a1100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a2000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 31 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a2100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-rtos-ipc-memory-region@a5000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 96 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-dma-memory@a7000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ad000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71-dma-memory@ad000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ad100000, size 63 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_0-memory@ad100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b1000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_1-dma-memory@b1000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b1100000, size 63 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_1-memory1b1100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b5000000, size 40 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-lo@b5000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000880000000, size 512 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-hi@880000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: initialized node vision_apps_shared-memories, compatible id dma-heap-carveout [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000980000000, size 896 MiB [ 0.000000] OF: reserved mem: initialized node linux-cma-buffers@980000000, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000009ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e77ffff] [ 0.000000] node 0: [mem 0x000000009e780000-0x00000000a3ffffff] [ 0.000000] node 0: [mem 0x00000000a4000000-0x00000000a4ffffff] [ 0.000000] node 0: [mem 0x00000000a5000000-0x00000000b77fffff] [ 0.000000] node 0: [mem 0x00000000b7800000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000880000000-0x000000089fffffff] [ 0.000000] node 0: [mem 0x00000008a0000000-0x00000009ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 20 pages/cpu s41064 r8192 d32664 u81920 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2064384 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ot [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) [ 0.000000] Memory: 5784368K/8388608K available (11712K kernel code, 1258K rwdata, 3812K rodata, 1984K init, 438K bss, 1686736K reserved, 917504K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @8a0800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x00000008a0040000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008a0050000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.008533] Console: colour dummy device 80x25 [ 0.013120] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.023788] pid_max: default: 32768 minimum: 301 [ 0.028547] LSM: Security Framework initializing [ 0.033381] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.041140] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.050831] cblist_init_generic: Setting adjustable number of callback queues. [ 0.058255] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.064540] cblist_init_generic: Setting adjustable number of callback queues. [ 0.071927] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.078288] rcu: Hierarchical SRCU implementation. [ 0.083187] rcu: Max phase no-delay instances is 1000. [ 0.088745] Platform MSI: msi-controller@1820000 domain created [ 0.095056] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [ 0.104499] EFI services will not be available. [ 0.109377] smp: Bringing up secondary CPUs ... [ 0.114592] Detected VIPT I-cache on CPU1 [ 0.114692] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [ 0.114709] GICv3: CPU1: using allocated LPI pending table @0x00000008a0060000 [ 0.114758] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.115383] Detected VIPT I-cache on CPU2 [ 0.115453] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [ 0.115466] GICv3: CPU2: using allocated LPI pending table @0x00000008a0070000 [ 0.115498] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.116053] Detected VIPT I-cache on CPU3 [ 0.116128] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [ 0.116140] GICv3: CPU3: using allocated LPI pending table @0x00000008a0080000 [ 0.116168] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.116229] smp: Brought up 1 node, 4 CPUs [ 0.195866] SMP: Total of 4 processors activated. [ 0.200673] CPU features: detected: 32-bit EL0 Support [ 0.205936] CPU features: detected: CRC32 instructions [ 0.211237] CPU: All CPU(s) started at EL2 [ 0.215430] alternatives: applying system-wide alternatives [ 0.222816] devtmpfs: initialized [ 0.236878] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.246876] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.280781] pinctrl core: initialized pinctrl subsystem [ 0.286718] DMI not present or invalid. [ 0.291198] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.298282] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.305720] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.313837] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.322119] audit: initializing netlink subsys (disabled) [ 0.327828] audit: type=2000 audit(0.224:1): state=initialized audit_enabled=0 res=1 [ 0.328251] thermal_sys: Registered thermal governor 'step_wise' [ 0.335745] thermal_sys: Registered thermal governor 'power_allocator' [ 0.342020] cpuidle: using governor menu [ 0.352843] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.359854] ASID allocator initialised with 65536 entries [ 0.378211] KASLR disabled due to lack of seed [ 0.388944] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395905] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.402306] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.409238] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.415638] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.422569] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.428969] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.435899] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.443578] k3-chipinfo 43000014.chipid: Family:J722S rev:SR1.0 JTAGID[0x0bba002f] Detected [ 0.453577] iommu: Default domain type: Translated [ 0.458581] iommu: DMA domain TLB invalidation policy: strict mode [ 0.465225] SCSI subsystem initialized [ 0.469367] usbcore: registered new interface driver usbfs [ 0.475003] usbcore: registered new interface driver hub [ 0.480448] usbcore: registered new device driver usb [ 0.486006] pps_core: LinuxPPS API ver. 1 registered [ 0.491078] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.500414] PTP clock support registered [ 0.504535] EDAC MC: Ver: 3.0.0 [ 0.508529] omap-mailbox 29000000.mailbox: omap mailbox rev 0x66fca100 [ 0.515349] omap-mailbox 29010000.mailbox: omap mailbox rev 0x66fca100 [ 0.522146] omap-mailbox 29020000.mailbox: omap mailbox rev 0x66fca100 [ 0.528988] omap-mailbox 29030000.mailbox: omap mailbox rev 0x66fca100 [ 0.535999] FPGA manager framework [ 0.539545] Advanced Linux Sound Architecture Driver Initialized. [ 0.546618] clocksource: Switched to clocksource arch_sys_counter [ 0.553075] VFS: Disk quotas dquot_6.6.0 [ 0.557120] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.569783] Carveout Heap: Exported 512 MiB at 0x0000000900000000 [ 0.576123] NET: Registered PF_INET protocol family [ 0.581413] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.594364] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.603201] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.611130] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.619650] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.629004] TCP: Hash tables configured (established 65536 bind 65536) [ 0.635871] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.642973] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.650666] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.656864] RPC: Registered named UNIX socket transport module. [ 0.662943] RPC: Registered udp transport module. [ 0.667746] RPC: Registered tcp transport module. [ 0.672548] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.679131] NET: Registered PF_XDP protocol family [ 0.684036] PCI: CLS 0 bytes, default 64 [ 0.688726] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.698603] Initialise system trusted keyrings [ 0.703373] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.714026] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.720540] NFS: Registering the id_resolver key type [ 0.725768] Key type id_resolver registered [ 0.730041] Key type id_legacy registered [ 0.734188] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.741035] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.782736] Key type asymmetric registered [ 0.786923] Asymmetric key parser 'x509' registered [ 0.791947] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.799642] io scheduler mq-deadline registered [ 0.804276] io scheduler kyber registered [ 0.811591] pinctrl-single 4084000.pinctrl: 34 pins, size 136 [ 0.817991] pinctrl-single f4000.pinctrl: 171 pins, size 684 [ 0.829994] Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled [ 0.845127] loop: module loaded [ 0.849526] megasas: 07.719.03.00-rc1 [ 0.856144] tun: Universal TUN/TAP device driver, 1.6 [ 0.862035] VFIO - User Level meta-driver version: 0.3 [ 0.868002] usbcore: registered new interface driver usb-storage [ 0.874700] i2c_dev: i2c /dev entries driver [ 0.880168] sdhci: Secure Digital Host Controller Interface driver [ 0.886520] sdhci: Copyright(c) Pierre Ossman [ 0.891170] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.897691] ledtrig-cpu: registered to indicate activity on CPUs [ 0.904013] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.910934] usbcore: registered new interface driver usbhid [ 0.916630] usbhid: USB HID core driver [ 0.921359] optee: probing for conduit method. [ 0.925936] optee: revision 4.1 (012cdca4) [ 0.926209] optee: dynamic shared memory is enabled [ 0.935630] optee: initialized driver [ 0.941147] Initializing XFRM netlink socket [ 0.945565] NET: Registered PF_PACKET protocol family [ 0.950784] Key type dns_resolver registered [ 0.955510] registered taskstats version 1 [ 0.959717] Loading compiled-in X.509 certificates [ 0.972498] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.0.6--w2023.01-j722s (Kool Koa') [ 1.027242] omap_i2c 2b200000.i2c: bus 0 rev0.12 at 400 kHz [ 1.033986] pca953x 1-0023: supply vcc not found, using dummy regulator [ 1.040863] pca953x 1-0023: using AI [ 1.067269] gpio-488 (TRC_MUX_SEL): hogged as output/low [ 1.073209] omap_i2c 20000000.i2c: bus 1 rev0.12 at 400 kHz [ 1.079128] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created [ 1.087434] ti-sci-intr bus@f0000:interrupt-controller@a00000: Interrupt Router 3 domain created [ 1.096639] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created [ 1.105606] ti-sci-inta 4e400000.interrupt-controller: Interrupt Aggregator domain 200 created [ 1.119329] ti-udma 485c0100.dma-controller: Number of rings: 82 [ 1.127257] ti-udma 485c0100.dma-controller: Channels: 44 (bchan: 16, tchan: 12, rchan: 16) [ 1.137821] ti-udma 485c0000.dma-controller: Number of rings: 150 [ 1.147596] ti-udma 485c0000.dma-controller: Channels: 35 (tchan: 20, rchan: 15) [ 1.156878] ti-udma 4e230000.dma-controller: Number of rings: 40 [ 1.164090] ti-udma 4e230000.dma-controller: Channels: 20 (bchan: 0, tchan: 8, rchan: 12) [ 1.174094] printk: console [ttyS2] disabled [ 1.178533] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 274, base_baud = 3000000) is a 8250 [ 1.187395] printk: console [ttyS2] enabled [ 1.187395] printk: console [ttyS2] enabled [ 1.195850] printk: bootconsole [ns16550a0] disabled [ 1.195850] printk: bootconsole [ns16550a0] disabled [ 1.208736] spi-nor spi0.0: s28hs512t (65536 Kbytes) [ 1.213831] 7 fixed-partitions partitions found on MTD device fc40000.spi.0 [ 1.220795] Creating 7 MTD partitions on "fc40000.spi.0": [ 1.226187] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 1.232743] 0x000000080000-0x000000280000 : "ospi.tispl" [ 1.239087] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 1.245462] 0x000000680000-0x0000006c0000 : "ospi.env" [ 1.251578] 0x0000006c0000-0x000000700000 : "ospi.env.backup" [ 1.258335] 0x000000800000-0x000003fc0000 : "ospi.rootfs" [ 1.264711] 0x000003fc0000-0x000004000000 : "ospi.phypattern" [ 1.314658] davinci_mdio 8000f00.mdio: davinci mdio revision 17.7, bus freq 1000000 [ 1.324284] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI DP83867 [ 1.332425] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01903, cpsw version 0x6BA81903 Ports: 3 quirks:00000006 [ 1.345281] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [ 1.351550] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [ 1.358675] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [ 1.365196] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010d, freq:500000000, add_val:1 pps:0 [ 1.375576] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [ 1.383388] cpu cpu0: _of_add_opp_table_v2: no supported OPPs [ 1.389193] cpu cpu0: OPP table can't be empty [ 1.394874] mmc0: CQHCI version 5.10 [ 1.405614] mmc1: CQHCI version 5.10 [ 1.406737] debugfs: Directory 'pd:249' with parent 'pm_genpd' already present! [ 1.416561] debugfs: Directory 'pd:248' with parent 'pm_genpd' already present! [ 1.423898] debugfs: Directory 'pd:247' with parent 'pm_genpd' already present! [ 1.431370] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 1.438741] debugfs: Directory 'pd:244' with parent 'pm_genpd' already present! [ 1.439869] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [ 1.445410] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [ 1.447846] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 1.468427] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 1.482709] ALSA device list: [ 1.485685] No soundcards found. [ 1.489425] Waiting for root device PARTUUID=07187f27-02... [ 1.516380] mmc1: new ultra high speed SDR104 SDHC card at address aaaa [ 1.523686] mmcblk1: mmc1:aaaa SL32G 29.7 GiB [ 1.532983] mmcblk1: p1 p2 [ 1.555490] mmc0: Command Queue Engine enabled [ 1.559985] mmc0: new HS400 MMC card at address 0001 [ 1.565638] mmcblk0: mmc0:0001 G1M15L 29.6 GiB [ 1.571810] mmcblk0: p1 p2 [ 1.575344] mmcblk0boot0: mmc0:0001 G1M15L 31.5 MiB [ 1.581493] mmcblk0boot1: mmc0:0001 G1M15L 31.5 MiB [ 1.587607] mmcblk0rpmb: mmc0:0001 G1M15L 4.00 MiB, chardev (240:0) [ 1.846351] EXT4-fs (mmcblk1p2): recovery complete [ 1.852131] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none. [ 1.860742] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.875071] devtmpfs: mounted [ 1.878636] Freeing unused kernel memory: 1984K [ 1.883251] Run /sbin/init as init process [ 2.030708] systemd[1]: System time before build time, advancing clock. [ 2.076285] NET: Registered PF_INET6 protocol family [ 2.082248] Segment Routing with IPv6 [ 2.085968] In-situ OAM (IOAM) with IPv6 [ 2.114823] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIB) [ 2.146634] systemd[1]: Detected architecture arm64. Welcome to Arago 2023.10! [ 2.213592] systemd[1]: Hostname set to . [ 2.301831] systemd-sysv-generator[156]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to i. [ 2.548557] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setti. [ 2.618840] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the se. [ 2.702519] systemd[1]: Queued start job for default target Graphical Interface. [ 2.771263] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 2.797579] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 2.821505] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 2.844851] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 2.867067] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 2.890929] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 2.915076] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 2.930767] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 2.950743] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 2.966754] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 3.020037] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 3.042875] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 3.071383] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 3.095132] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 3.122737] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 3.143381] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 3.167311] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 3.183524] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 3.207423] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 3.227185] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 3.247213] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 3.295135] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 3.315581] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 3.343624] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 3.359209] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [ 3.379635] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 3.400705] systemd[1]: Starting Create List of Static Device Nodes... Starting Create List of Static Device Nodes... [ 3.427488] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 3.447569] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 3.467689] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 3.481493] fuse: init (API version 7.37) [ 3.492838] systemd[1]: Starting Start psplash boot splash screen... Starting Start psplash boot splash screen... [ 3.521127] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 3.535037] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [ 3.554590] systemd[1]: Starting Journal Service... Starting Journal Service... [ 3.583932] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 3.604599] cryptodev: loading out-of-tree module taints kernel. [ 3.605275] systemd[1]: Starting Generate network units from Kernel command line... Starting Generate network …ts from Kernel co[ 3.619150] cryptodev: driver 1.12 loaded. mmand line... [ 3.644191] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 3.667692] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none. [ 3.673055] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 3.701708] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 3.719449] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory /tmp. [ OK ] Finished Create List of Static Device Nodes. [ OK ] Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [FAILED] Failed to start Start psplash boot splash screen. See 'systemctl status psplash-start.service' for details. [DEPEND] Dependency failed for Star…progress communication helper. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Generate network units from Kernel command line. [ OK ] Finished Remount Root and Kernel File Systems. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... Starting Apply Kernel Variables... [ 4.081728] systemd-journald[172]: Received client request to flush runtime journal. Starting Create Static Device Nodes in /dev... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Mounting /media/ram... Mounting /var/volatile... [ 4.283554] audit: type=1334 audit(1651167747.252:2): prog-id=5 op=LOAD [ 4.290295] audit: type=1334 audit(1651167747.260:3): prog-id=6 op=LOAD Starting Rule-based Manage…for Device Events and Files... [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. [ OK ] Finished Coldplug All udev Devices. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Record System Boot/Shutdown in UTMP... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Finished Record System Boot/Shutdown in UTMP. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ 4.971109] mc: Linux media interface: v0.10 [ OK ] Reached target System Time Set. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timer Units.[ 5.009530] videodev: Linux video capture interface: v2.00 [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ 5.036409] k3-dsp-rproc 7e000000.dsp: assigned reserved memory node vision-apps-c71-dma-memory@ad000000 [ 5.047953] k3-dsp-rproc 7e000000.dsp: configured DSP for IPC-only mode [ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API... [ 5.088353] remoteproc remoteproc0: 7e000000.dsp is available [ 5.094479] remoteproc remoteproc0: attaching to 7e000000.dsp [ 5.106577] k3-dsp-rproc 7e000000.dsp: DSP initialized in IPC-only mode [ 5.108708] platform 79000000.r5f: configured R5F for remoteproc mode [ 5.113576] rproc-virtio rproc-virtio.0.auto: assigned reserved memory node vision-apps-c71-dma-memory@ad000000 [ 5.121652] platform 79000000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a1000000 [ 5.131275] virtio_rpmsg_bus virtio0: rpmsg host is online [ 5.139260] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xd [ 5.145276] rproc-virtio rproc-virtio.0.auto: registered virtio0 (type 7) [ 5.155349] remoteproc remoteproc1: 79000000.r5f is available [ 5.160436] remoteproc remoteproc0: remote processor 7e000000.dsp is now attached [ 5.165404] remoteproc remoteproc1: Direct firmware load for j722s-mcu-r5f0_0-fw failed with error -2 [ 5.172910] k3-dsp-rproc 7e000000.dsp: register pm nitifiers in remoteproc mode [ 5.181232] remoteproc remoteproc1: powering up 79000000.r5f [ 5.194413] remoteproc remoteproc1: Direct firmware load for j722s-mcu-r5f0_0-fw failed with error -2 [ 5.195173] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [ 5.203845] remoteproc remoteproc1: request_firmware failed: -2 [ 5.217186] platform 78000000.r5f: configured R5F for IPC-only mode [ 5.218363] k3-dsp-rproc 7e200000.dsp: assigned reserved memory node vision-apps-c71_1-dma-memory@b1000000 [ 5.219408] k3-dsp-rproc 7e200000.dsp: configured DSP for IPC-only mode [ 5.244200] platform 78000000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000 [ 5.254554] remoteproc remoteproc2: 78000000.r5f is available [ 5.260551] remoteproc remoteproc2: attaching to 78000000.r5f [ 5.267176] platform 78000000.r5f: R5F core initialized in IPC-only mode [ 5.274014] rproc-virtio rproc-virtio.1.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000 [ OK ] Listening on dropbear.socket. [ 5.293977] remoteproc remoteproc3: 7e200000.dsp is available [ 5.300421] remoteproc remoteproc3: attaching to 7e200000.dsp [ OK ] Listening on PC/SC Smart Card Daemo[ 5.310021] k3-dsp-rproc 7e200000.dsp: DSP initialized in IPC-only mode n Activation Socket. [ 5.320707] rproc-virtio rproc-virtio.2.auto: assigned reserved memory node vision-apps-c71_1-dma-memory@b1000000 [ 5.335408] virtio_rpmsg_bus virtio1: rpmsg host is online [ 5.335640] virtio_rpmsg_bus virtio2: rpmsg host is online [ 5.335655] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xd [ 5.335760] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xe [ 5.336106] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xd [ 5.342628] rproc-virtio rproc-virtio.1.auto: registered virtio1 (type 7) [ 5.346673] rproc-virtio rproc-virtio.2.auto: registered virtio2 (type 7) [ 5.354037] remoteproc remoteproc2: remote processor 78000000.r5f is now attached [ 5.361114] remoteproc remoteproc3: remote processor 7e200000.dsp is now attached Starting Weston socket... [ 5.397289] k3-dsp-rproc 7e200000.dsp: register pm nitifiers in remoteproc mode [ 5.415018] platform 78400000.r5f: configured R5F for IPC-only mode [ 5.421510] platform 78400000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000 [ 5.426670] random: crng init done [ 5.441303] remoteproc remoteproc4: 78400000.r5f is available [ 5.447459] remoteproc remoteproc4: attaching to 78400000.r5f [ 5.458698] platform 78400000.r5f: R5F core initialized in IPC-only mode [ 5.465955] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000 Starting D-Bus System Message Bus... [ 5.507680] rtc-ti-k3 2b1f0000.rtc: registered as rtc0 [ 5.518593] rtc-ti-k3 2b1f0000.rtc: setting system clock to 1970-01-01T00:00:03 UTC (3) [ 5.531733] e5010 fd20000.e5010: Device registered as /dev/video2 [ 5.539257] virtio_rpmsg_bus virtio3: rpmsg host is online [ 5.539919] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0xd [ 5.552057] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0x15 [ 5.552203] PVR_K: 226: Device: fd80000.gpu [ 5.559293] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0x15 Starting Reboot and dump vmcore via kexec.[ 5.570839] rproc-virtio rproc-virtio.3.auto: registered virtio3 (type 7) .. [ 5.570875] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xe [ 5.583017] remoteproc remoteproc4: remote processor 78400000.r5f is now attached [ 5.590994] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xe [ 5.630921] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0x15 [ 5.638506] virtio_rpmsg_bus virtio0: msg received with no recipient [ 5.645142] virtio_rpmsg_bus virtio2: msg received with no recipient [ OK ] Finished Load/Save Random Seed. [ OK ] Listening on Docker Socket for the API. [ OK ] Listening on Weston socket. [ OK ] Finished Reboot and dump vmcore via kexec. [ 5.714097] virtio_rpmsg_bus virtio3: creating channel ti.ipc4.ping-pong addr 0xe [ 5.722185] virtio_rpmsg_bus virtio3: msg received with no recipient [ OK ] Found device /dev/ttyS2. [ 5.738583] j721e-pcie-host f102000.pcie: host bridge /pcie@f102000 ranges: [ 5.745816] PVR_K: 226: Read BVNC 36.53.104.796 from HW device registers [ 5.745875] j721e-pcie-host f102000.pcie: IO 0x0068001000..0x0068010fff -> 0x0068001000 [ 5.752871] PVR_K: 226: RGX Device registered BVNC 36.53.104.796 with 1 core in the system [ 5.761387] j721e-pcie-host f102000.pcie: MEM 0x0068011000..0x006fffffff -> 0x0068011000 [ 5.770995] [drm] Initialized pvr 23.3.6512818 20170530 for fd80000.gpu on minor 0 [ 5.778672] j721e-pcie-host f102000.pcie: IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000 [ OK ] Reached target Socket Units. [ OK ] Started D-Bus System Message Bus. [ OK ] Reached target Basic System. [ OK ] Started Job spooling tools. [ OK ] Started Periodic Command Scheduler. Starting DEMO... Starting Print notice about GPLv3 packages... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... [ OK ] Started irqbalance daemon. Starting Telephony service... Starting Expand the rootfs…ll size of the boot device.... [ OK ] Started strongSwan IPsec I…IKEv2 daemon using ipsec.conf. [ 6.326251] audit: type=1334 audit(1651238316.497:4): prog-id=7 op=LOAD [ 6.339663] audit: type=1334 audit(1651238316.513:5): prog-id=8 op=LOAD Starting User Login Management... [ OK ] Started TEE Supplicant. Starting Telnet Server... [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Finished Telnet Server. [ OK ] Reached target Preparation for Network. Starting Network Configuration... [ OK ] Started Telephony service. [ 6.556466] Bluetooth: Core ver 2.22 [ 6.561812] NET: Registered PF_BLUETOOTH protocol family [ 6.568313] Bluetooth: HCI device and connection manager initialized [ 6.575702] Bluetooth: HCI socket layer initialized [ OK ] Started DEMO. [ 6.581513] Bluetooth: L2CAP socket layer initialized [ 6.590712] Bluetooth: SCO socket layer initialized [ 6.904806] j721e-pcie-host f102000.pcie: PCI host bridge to bus 0000:00 [ 6.911723] pci_bus 0000:00: root bus resource [bus 00-ff] [ 6.917655] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x68001000-0x68010fff]) [ 6.927340] pci_bus 0000:00: root bus resource [mem 0x68011000-0x6fffffff] [ 6.934512] pci 0000:00:00.0: [104c:b010] type 01 class 0x060400 [ 6.940951] pci 0000:00:00.0: supports D1 [ 6.945212] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 6.963487] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ OK ] Finished Expand the rootfs…full size of the boot device.. [ 7.028207] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.069854] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.070754] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 7.126958] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 7.134913] pci 0000:00:00.0: PCI bridge to [bus 01] [ 7.293722] pcieport 0000:00:00.0: PME: Signaling with IRQ 473 [ OK ] Started Network Configuration. [ 7.330646] pcieport 0000:00:00.0: AER: enabled with IRQ 473 [ 7.360296] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:00] driver [TI DP83867] (irq=POLL) [ 7.360330] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid link mode Starting Network Name Resolution... [ OK ] Started User Login Management. [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. [ 7.591222] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 7.596932] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 1 [ 7.605069] xhci-hcd xhci-hcd.5.auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000002000018010 [ 7.614671] xhci-hcd xhci-hcd.5.auto: irq 474, io mem 0x31210000 [ 7.621002] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 7.626588] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 2 [ 7.634348] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed [ 7.643117] hub 1-0:1.0: USB hub found [ 7.647017] hub 1-0:1.0: 1 port detected [ 7.655562] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 7.664773] hub 2-0:1.0: USB hub found [ 7.670803] hub 2-0:1.0: 1 port detected [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ 7.906689] usb 1-1: new high-speed USB device number 2 using xhci-hcd 0;32m OK ] Reached target Host and Network Name Lookups. Starting Avahi mDNS/DNS-SD Stack... Starting Enable and configure wl18xx bluetooth stack... Starting containerd container runtime... [ OK ] Started Netperf Benchmark Server. [ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Simple Network Ma…ent Protocol (SNMP) Daemon.... Starting Permit User Sessions... [ OK ] Finished Enable and configure wl18xx bluetooth stack. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Finished Permit User Sessions. [ 8.064531] hub 1-1:1.0: USB hub found [ 8.068479] hub 1-1:1.0: 4 ports detected [ OK ] Created slice Slice /system/systemd-fsck. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... Starting Weston, a Wayland…ositor, as a system service... [ 8.194770] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 8.219993] hub 2-1:1.0: USB hub found [ 8.224014] hub 2-1:1.0: 4 ports detected [ OK ] Found device /dev/mmcblk0p1. Starting File System Check on /dev/mmcblk0p1... [ 8.338699] audit: type=1334 audit(1651238318.509:6): prog-id=9 op=LOAD Starting User Database Manager... [ 8.351034] audit: type=1334 audit(1651238318.517:7): prog-id=10 op=LOAD [ OK ] Found device /dev/mmcblk1p1. Starting File System Check on /dev/mmcblk1p1... [ OK ] Finished File System Check on /dev/mmcblk0p1. Mounting /run/media/mmcblk0p1... [ OK ] Mounted /run/media/mmcblk0p1. [ OK ] Started User Database Manager. [ OK ] Created slice User Slice of UID 1000. Starting User Runtime Directory /run/user/1000... [ OK ] Finished File System Check on /dev/mmcblk1p1. Mounting /run/media/BOOT-mmcblk1p1... [ OK ] Finished User Runtime Directory /run/user/1000. Starting User Manager for UID 1000... [ 8.828135] audit: type=1006 audit(1651238319.001:8): pid=723 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 [ 8.840983] audit: type=1300 audit(1651238319.001:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffc11479d8 a2=4 a3=ffff930e9020 items=0 ppid=1 pid=723 auid=1000 uid=0 gid=0 euid=0 suid=0 fsu) [FAILED] Failed to start Synchronize Syste[ 8.868285] audit: type=1327 audit(1651238319.001:8): proctitle="(systemd)" m and HW clocks. See 'systemctl status sync-clocks.service' for details. [ OK ] Mounted /run/media/BOOT-mmcblk1p1. [ OK ] Started Simple Network Man…ement Protocol (SNMP) Daemon.. [ 9.420195] am65-cpsw-nuss 8000000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 9.429275] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Started User Manager for UID 1000. [ OK ] Started Session c1 of User weston. [ 9.572684] audit: type=1006 audit(1651238319.745:9): pid=664 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1 [ 9.585147] audit: type=1300 audit(1651238319.745:9): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffc11479d8 a2=4 a3=ffff930e9020 items=0 ppid=1 pid=664 auid=1000 uid=0 gid=0 euid=0 suid=0 fsu) [ 9.611670] audit: type=1327 audit(1651238319.745:9): proctitle="(weston)" [ OK ] Started containerd container runtime. [FAILED] Failed to start Weston, a …mpositor, as a system service. See 'systemctl status weston.service' for details. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPL-3.0 packages: adwaita-icon-theme-symbolic autoconf bash-dev bash bc binutils cifs-utils coreutils-stdbuf coreutils cpio cpp-symlinks cpp dosfstools elfutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbserver gettext glmark2 gnu-config grub-common grub-editenv grub-efi gzip hidapi less libasm1 libatomic-dev libatomic1 libbfd libdebuginfod1 libdw1 libeigen-dev libelf1 libgcc-s-dev libgcc1 libgdbm-compat4 libgdbm-dev libgdbm6 libgettextlib libgettextsrc libgmp10 libidn2-0 libmpc3 libmpfr6 libopcodes libqt5charts-examples libqt5charts-plugins libqt5charts-qmlplugins libqt5charts5 libqt5sensors-plugins libqt5sensors-qmlplugins libqt5sensors5 libqt5serialport-examples libqt5serialport-plugins libqt5serialport-qmlplugins libqt5serialport5 libqt5svg-examples libqt5svg-plugins libqt5svg-qmlplugins libqt5svg5 libqt5virtualkeyboard-plugins libqt5virtualkeyboard-qmlplugins libqt5virtualkeyboard5 libqt5webchannel-plugins libqt5webchannel-qmlplugins libqt5webchannel5 libreadline-dev libreadline8 libstdc++-dev libstdc++6 libunistring2 m4-dev m4 make nettle parted piglit qt3d-plugins qt3d-qmlplugins qt3d qtbase-examples qtbase-plugins qtbase-qmlplugins qtbase qtconnectivity-plugins qtconnectivity-qmlplugins qtconnectivity qtdeclarative-plugins qtdeclarative-qmlplugins qtdeclarative-tools qtdeclarative qtgraphicaleffects-qmlplugins qtlocation-examples qtlocation-plugins qtlocation-qmlplugins qtlocation qtmultimedia-examples qtmultimedia-plugins qtmultimedia-qmlplugins qtmultimedia qtquics-qmlplugins.control qtquics2-plugins.control qtquics2-qmlplugins.control qtquics2.control qtscript-examples qtscript-plugins qtscript-qmlplugins qtscript qtwayland-examples qtwayland-plugins qtwayland-qmlplugins qtwayland tar which If you do not wish to distribute GPL-3.0 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Finished Print notice about GPLv3 packages. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Record Runlevel Change in UTMP... [ OK ] Finished Record Runlevel Change in UTMP.