U-Boot SPL 2016.05-00118-gabc6b2a-dirty (Mar 04 2017 - 22:11:05) Trying to boot from NAND The Expected Linux image was not found. Please check your NAND configuration. Trying to start u-boot now... U-Boot 2016.05-00118-gabc6b2a-dirty (Mar 04 2017 - 21:39:58 +0530) Watchdog enabled I2C: ready DRAM: 1 GiB NAND: 256 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Error - No Valid Environment Area found *** Warning - bad CRC, using default environment not set. Validating first E-fuse MAC Net: eth0: ethernet@4a100000 Warning: usb_ether MAC addresses don't match: Address in SROM is de:ad:be:ef:00:01 Address in environment is 68:c9:0b:73:09:1b , eth1: usb_ether Press SPACE to abort autoboot in 2 seconds Booting from nand ... NAND read: device 0 offset 0x80000, size 0x40000 262144 bytes read: OK NAND read: device 0 offset 0x200000, size 0x800000 8388608 bytes read: OK Kernel image @ 0x82000000 [ 0x000000 - 0x351c60 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8fff3000, end 8ffff0ac ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.19-gdb0b54cdad (root@adems) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #3 PREEMPT Thu Mar 2 12:32:02 IST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x EVM [ 0.000000] cma: Reserved 24 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (neon ) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048 rootfstype=ubifs rootwait=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1003936K/1048576K available (6619K kernel code, 314K rwdata, 2344K rodata, 264K init, 265K bss, 20064K reserved, 24576K cma-reserved, 237568K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08c9004 (8965 kB) [ 0.000000] .init : 0xc08ca000 - 0xc090c000 ( 264 kB) [ 0.000000] .data : 0xc090c000 - 0xc095abd0 ( 315 kB) [ 0.000000] .bss : 0xc095abd0 - 0xc099d398 ( 266 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000042] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000055] OMAP clocksource: timer1 at 24000000 Hz [ 0.000257] clocksource_probe: no matching clocksources found [ 0.000474] Console: colour dummy device 80x30 [ 0.000504] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000513] This ensures that you still see kernel messages. Please [ 0.000520] update your kernel commandline. [ 0.000543] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032) [ 0.058795] pid_max: default: 32768 minimum: 301 [ 0.058965] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.058982] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.059843] Initializing cgroup subsys io [ 0.059882] Initializing cgroup subsys memory [ 0.059929] Initializing cgroup subsys devices [ 0.059948] Initializing cgroup subsys freezer [ 0.059965] Initializing cgroup subsys perf_event [ 0.059981] Initializing cgroup subsys pids [ 0.060014] CPU: Testing write buffer coherency: ok [ 0.060469] Setting up static identity map for 0x80008200 - 0x80008258 [ 0.063245] devtmpfs: initialized [ 0.079001] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.097583] omap_hwmod: debugss: _wait_target_disable failed [ 0.154886] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.157441] pinctrl core: initialized pinctrl subsystem [ 0.159189] NET: Registered protocol family 16 [ 0.161720] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.188856] cpuidle: using governor ladder [ 0.218846] cpuidle: using governor menu [ 0.224623] OMAP GPIO hardware version 0.1 [ 0.235045] omap-gpmc 50000000.gpmc: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/nandflash_pins_s0, deferring probe [ 0.237704] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.279841] edma 49000000.edma: TI EDMA DMA engine driver [ 0.284979] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 0.285166] media: Linux media interface: v0.10 [ 0.285251] Linux video capture interface: v2.00 [ 0.285315] pps_core: LinuxPPS API ver. 1 registered [ 0.285325] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.285364] PTP clock support registered [ 0.285442] EDAC MC: Ver: 3.0.0 [ 0.286875] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.287274] Advanced Linux Sound Architecture Driver Initialized. [ 0.288795] clocksource: Switched to clocksource timer1 [ 0.302974] NET: Registered protocol family 2 [ 0.303935] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.304058] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.304168] TCP: Hash tables configured (established 8192 bind 8192) [ 0.304292] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.304328] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.304522] NET: Registered protocol family 1 [ 0.305011] RPC: Registered named UNIX socket transport module. [ 0.305030] RPC: Registered udp transport module. [ 0.305039] RPC: Registered tcp transport module. [ 0.305048] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.306160] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.308591] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.319624] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.320855] NFS: Registering the id_resolver key type [ 0.320951] Key type id_resolver registered [ 0.320963] Key type id_legacy registered [ 0.321062] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.321450] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.325952] bounce: pool size: 64 pages [ 0.326263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.326290] io scheduler noop registered [ 0.326309] io scheduler deadline registered [ 0.326524] io scheduler cfq registered (default) [ 0.328196] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.411477] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.416734] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250 [ 1.035904] console [ttyS0] enabled [ 1.040925] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250 [ 1.051131] [drm] Initialized drm 1.1.0 20060810 [ 1.058136] tilcdc 4830e000.lcdc: no encoders/connectors found [ 1.073334] loop: module loaded [ 1.079994] libphy: Fixed MDIO Bus: probed [ 1.148878] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.155024] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.162306] libphy: 4a101000.mdio: probed [ 1.166357] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver TI DP83867 [ 1.175597] cpsw 4a100000.ethernet: No slave[1] phy_id, phy-handle, or fixed-link property [ 1.184032] cpsw 4a100000.ethernet: Detected MACID = 68:c9:0b:73:09:19 [ 1.192902] mousedev: PS/2 mouse device common for all mice [ 1.199395] i2c /dev entries driver [ 1.204235] cpuidle: enable-method property 'ti,am3352' found operations [ 1.212092] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.360782] ledtrig-cpu: registered to indicate activity on CPUs [ 1.373703] NET: Registered protocol family 10 [ 1.379965] sit: IPv6 over IPv4 tunneling driver [ 1.385601] NET: Registered protocol family 17 [ 1.390606] Key type dns_resolver registered [ 1.395119] omap_voltage_late_init: Voltage driver support not added [ 1.405597] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 1.410958] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 1.418728] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda [ 1.425249] nand: Micron MT29F2G08ABAEAWP [ 1.429332] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.436974] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme [ 1.442449] 10 ofpart partitions found on MTD device 8000000.nand [ 1.448575] Creating 10 MTD partitions on "8000000.nand": [ 1.454031] 0x000000000000-0x000000020000 : "NAND.SPL" [ 1.461006] 0x000000020000-0x000000040000 : "NAND.SPL.backup1" [ 1.468420] 0x000000040000-0x000000060000 : "NAND.SPL.backup2" [ 1.475913] 0x000000060000-0x000000080000 : "NAND.SPL.backup3" [ 1.483259] 0x000000080000-0x0000000c0000 : "NAND.u-boot-spl-os" [ 1.490801] 0x0000000c0000-0x0000001c0000 : "NAND.u-boot" [ 1.497970] 0x0000001c0000-0x0000001e0000 : "NAND.u-boot-env" [ 1.505289] 0x0000001e0000-0x000000200000 : "NAND.u-boot-env.backup1" [ 1.513294] 0x000000200000-0x000000a00000 : "NAND.kernel" [ 1.523106] 0x000000a00000-0x000010000000 : "NAND.file-system" [ 1.639090] tps65910 0-002d: No interrupt support, no core IRQ [ 1.669930] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.676393] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.681642] vmmc: supplied by vbat [ 1.719606] vdd_mpu: supplied by vbat [ 1.726060] ubi0: attaching mtd9 [ 2.714484] ubi0: scanning is finished [ 2.728314] ubi0: attached mtd9 (name "NAND.file-system", size 246 MiB) [ 2.735080] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.742009] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512 [ 2.748742] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.755753] ubi0: good PEBs: 1968, bad PEBs: 0, corrupted PEBs: 0 [ 2.761893] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 2.769166] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1634636836 [ 2.778341] ubi0: available PEBs: 0, total reserved PEBs: 1968, PEBs reserved for bad PEB handling: 40 [ 2.787719] ubi0: background thread "ubi_bgt0d" started, PID 58 [ 2.794107] hctosys: unable to open rtc device (rtc0) [ 2.803674] lis3_reg: disabling [ 2.806864] wlan-en-regulator: disabling [ 2.811279] ALSA device list: [ 2.814273] No soundcards found. [ 2.828905] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 59 [ 2.857057] UBIFS (ubi0:0): recovery needed [ 2.954840] UBIFS (ubi0:0): recovery completed [ 2.959500] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 2.966935] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 2.976927] UBIFS (ubi0:0): FS size: 242905088 bytes (231 MiB, 1913 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) [ 2.987691] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 2.993575] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 33E743D7-4D43-4A54-B4C7-7700F91F2C19, small LPT model [ 3.006799] VFS: Mounted root (ubifs filesystem) on device 0:14. [ 3.014411] devtmpfs: mounted [ 3.017843] Freeing unused kernel memory: 264K (c08ca000 - c090c000) [ 3.024265] This architecture does not have kernel memory protection. [ 3.233200] systemd[1]: System time before build time, advancing clock. [ 3.300211] random: systemd: uninitialized urandom read (16 bytes read, 9 bits of entropy available) [ 3.331964] random: systemd: uninitialized urandom read (16 bytes read, 9 bits of entropy available) [ 3.355146] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 3.374901] systemd[1]: Detected architecture arm. Welcome to Arago 2016.08! [ 3.400909] systemd[1]: Set hostname to . [ 3.581957] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 3.629933] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 3.691608] random: systemd: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 3.752551] random: systemd: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 3.762593] random: systemd: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 3.773200] random: systemd: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 3.840507] random: systemd: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 3.873014] random: systemd: uninitialized urandom read (16 bytes read, 10 bits of entropy available) [ 4.152645] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.209122] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 4.239740] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.270820] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.301023] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.329299] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.359206] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 4.379548] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.409442] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.439506] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.470885] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.499654] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.529615] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.565105] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 4.618514] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 4.726901] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 4.854488] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 4.924209] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 5.005432] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.044755] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 5.105363] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 5.169469] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 5.199924] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 5.247921] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.279816] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 5.336662] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 5.369611] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 5.389685] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 5.423529] systemd[1]: Started Apply Kernel Variables. [ OK ] Started Apply Kernel Variables. [ 5.461799] systemd[1]: Started Create list of required static device nodes for the current kernel. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ 5.501739] systemd[1]: Started Setup Virtual Console. [ OK ] Started Setup Virtual Console. [ 5.531746] systemd[1]: Started Remount Root and Kernel File Systems. [ OK ] Started Remount Root and Kernel File Systems. [ 5.560558] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... Starting udev Coldplug all Devices... Starting Create Static Device Nodes in /dev... [ OK ] Started Create Static Device Nodes in /dev. [ 7.265294] systemd-journald[93]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Volatile Files and Directories. [ 9.549274] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 9.591593] 47401300.usb-phy supply vcc not found, using dummy regulator [ 9.734803] 47401b00.usb-phy supply vcc not found, using dummy regulator [ 9.964540] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ OK ] Started udev Coldplug all Devices. [ 10.178752] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ OK ] Found device /dev/ttyS0. [ 10.672524] ti-pruss 4a300000.pruss: creating PRU cores and other child platform devices [ 10.760640] irq: no irq domain found for /ocp/pruss@4a300000/intc@4a320000 ! [ 10.768435] irq: no irq domain found for /ocp/pruss@4a300000/intc@4a320000 ! [ 11.025961] remoteproc0: 4a334000.pru0 is available [ 11.108170] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 11.184389] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 11.299847] remoteproc0: Direct firmware load for am335x-pru0-fw failed with error -2 [ 11.307840] remoteproc0: failed to load am335x-pru0-fw [ 11.434521] pru-rproc 4a334000.pru0: booting the PRU core manually Starting Network Time Synchronization... [ 11.458589] remoteproc0: powering up 4a334000.pru0 Starting Update UTMP about System Boot/Shutdown...[ 11.589406] remoteproc0: Direct firmware load for am335x-pru0-fw failed with error -2 [ 11.721196] remoteproc0: request_firmware failed: -2 [ 11.726318] pru-rproc 4a334000.pru0: rproc_boot failed [ 11.830598] remoteproc0: releasing 4a334000.pru0 [ 11.835524] pru-rproc: probe of 4a334000.pru0 failed with error -2 [ 11.900500] remoteproc0: 4a338000.pru1 is available [ 11.905523] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 12.120406] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 12.145757] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 12.302895] remoteproc1: wkup_m3 is available [ 12.307392] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 12.317346] remoteproc0: Direct firmware load for am335x-pru1-fw failed with error -2 [ 12.378979] remoteproc0: failed to load am335x-pru1-fw [ 12.384310] pru-rproc 4a338000.pru1: booting the PRU core manually [ 12.459078] remoteproc0: powering up 4a338000.pru1 [ 12.464092] remoteproc0: Direct firmware load for am335x-pru1-fw failed with error -2 [ 12.526911] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ OK ] Started Network Time Synchronization. [ 12.619411] remoteproc0: request_firmware failed: -2 [ 12.624530] pru-rproc 4a338000.pru1: rproc_boot failed [ 12.642864] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 12.742697] remoteproc0: releasing 4a338000.pru1 [ 12.747608] pru-rproc: probe of 4a338000.pru1 failed with error -2 [ 12.763965] remoteproc1: powering up wkup_m3 [ 12.849805] remoteproc1: Booting fw image am335x-pm-firmware.elf, size 217148 [ 12.857373] remoteproc1: remote processor wkup_m3 is now up [ 12.863085] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x191 [ 12.917130] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 13.736552] PM: bootloader does not support rtc-only! [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Found device /dev/ttyS3. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Reached target System Time Synchronized. Starting Synchronize System and HW clocks... [ OK ] Started Synchronize System and HW clocks. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Permit User Sessions... Starting telnetd.service... [ OK ] Started Kernel Logging Service. [ OK ] Started System Logging Service. Starting Login Service... [ OK ] Started D-Bus System Message Bus. Starting Network Service... Starting Print notice about GPLv3 packages... [ OK ] Started Permit User Sessions. [ OK ] Started telnetd.service. [ 18.002046] usbcore: registered new interface driver usbfs [ 18.007685] usbcore: registered new interface driver hub [ 18.119316] usbcore: registered new device driver usb [ OK ] Started Network Service. [ 18.397155] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver [ 18.522971] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1 [ 18.569732] hub 1-0:1.0: USB hub found [ 18.612943] hub 1-0:1.0: 1 port detected [ 18.650926] net eth0: initializing cpsw version 1.12 (0) [ 18.656325] net eth0: initialized cpsw ale version 1.4 [ 18.691173] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 18.697025] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 2 [ 18.705452] net eth0: ALE Table size 1024 [ 18.720742] net eth0: phy "4a101000.mdio:00" not found on slave 0, err -19 [ 18.727688] libphy: PHY not found [ 18.768488] hub 2-0:1.0: USB hub found [ 18.772513] net eth0: phy "" not found on slave 1, err -19 [ 18.799012] hub 2-0:1.0: 1 port detected [ 18.824583] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.430923] musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (80, Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ OK ] Started Login Service. [ OK ] Reached target Network. Starting Network Name Resolution... Starting thttpd.service... [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Serial Getty on ttyS3. [ OK ] Started Getty on tty1. [ OK ] Started thttpd.service. [ OK ] Started Network Name Resolution. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am335x-evm ttyS0 Arago 2016.08 am335x-evm ttyS0 am335x-evm login: [ 29.193946] random: nonblocking pool is initialized _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am335x-evm ttyS0 Arago 2016.08 am335x-evm ttyS0 am335x-evm login: _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am335x-evm ttyS0 Arago 2016.08 am335x-evm ttyS0 am335x-evm login:>