BOOT LOG – AM 62 – EVM – V09.02.01.09 – After Kernel ReBuild U-Boot SPL 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.7--v09.02.07 (Kool Koala)') SPL initial stack usage: 13408 bytes Trying to boot from MMC2 Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Starting ATF on ARM64 core... NOTICE: BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty NOTICE: BL31: Built : 16:09:05, Feb 9 2024 U-Boot SPL 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.7--v09.02.07 (Kool Koala)') SPL initial stack usage: 1856 bytes Error (-2): cannot determine file size Trying to boot from MMC2 Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted U-Boot 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000) SoC: AM62X SR1.0 GP Model: Texas Instruments AM625 SK EEPROM not available at 80, trying to read at 81 Board: AM62-SKEVM rev E3 DRAM: no bloblist found!2 GiB Core: 72 devices, 32 uclasses, devicetree: separate MMC: mmc@fa10000: 0, mmc@fa00000: 1 Loading Environment from nowhere... OK In: serial Out: serial Err: serial Net: eth0: ethernet@8000000port@1 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 Failed to load 'boot.scr' Failed to load 'uEnv.txt' ## Error: "main_cpsw0_qsgmii_phyinit" not defined 33329664 bytes read in 369 ms (86.1 MiB/s) 63195 bytes read in 17 ms (3.5 MiB/s) Working FDT set to 88000000 ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK Working FDT set to 8feed000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.80-rt26-dirty (aswin_ubunutu@aswin-ubuntu-hp-elitebook-840-g5) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 24 16:04:43 IST 2024 [ 0.000000] Machine model: Texas Instruments AM625 SK [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8000000, size 128 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0xf7faa980-0xf7facfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 23 pages/cpu s53568 r8192 d32448 u94208 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=d2c3753a-02 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1838388K/2097152K available (14784K kernel code, 3748K rwdata, 6604K rodata, 7296K init, 614K bss, 127692K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: 0xffff80000847b0a0 [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000080020000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080030000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.001588] Console: colour dummy device 80x25 [ 0.515414] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [ 0.515425] pid_max: default: 32768 minimum: 301 [ 0.515492] LSM: Security Framework initializing [ 0.515626] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.515649] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.517341] rcu: Hierarchical SRCU implementation. [ 0.517349] rcu: Max phase no-delay instances is 400. [ 0.517394] printk: bootconsole [ns16550a0] printing thread started [ 0.569884] Platform MSI: msi-controller@1820000 domain created [ 0.570150] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [ 0.570267] fsl-mc MSI: msi-controller@1820000 domain created [ 0.572496] EFI services will not be available. [ 0.572770] smp: Bringing up secondary CPUs ... [ 0.573527] Detected VIPT I-cache on CPU1 [ 0.573641] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [ 0.573658] GICv3: CPU1: using allocated LPI pending table @0x0000000080040000 [ 0.573713] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.629694] Detected VIPT I-cache on CPU2 [ 0.629791] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [ 0.629807] GICv3: CPU2: using allocated LPI pending table @0x0000000080050000 [ 0.629841] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.655743] Detected VIPT I-cache on CPU3 [ 0.655835] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [ 0.655848] GICv3: CPU3: using allocated LPI pending table @0x0000000080060000 [ 0.655881] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.655946] smp: Brought up 1 node, 4 CPUs [ 0.685352] SMP: Total of 4 processors activated. [ 0.685358] CPU features: detected: 32-bit EL0 Support [ 0.685360] CPU features: detected: 32-bit EL1 Support [ 0.685364] CPU features: detected: CRC32 instructions [ 0.685418] CPU: All CPU(s) started at EL2 [ 0.685435] alternatives: applying system-wide alternatives [ 0.687379] devtmpfs: initialized [ 0.699159] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.699184] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.704502] pinctrl core: initialized pinctrl subsystem [ 0.707106] DMI not present or invalid. [ 0.707718] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.721180] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.721418] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.721572] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.721677] audit: initializing netlink subsys (disabled) [ 0.721820] audit: type=2000 audit(0.718:1): state=initialized audit_enabled=0 res=1 [ 0.723496] thermal_sys: Registered thermal governor 'step_wise' [ 0.723591] cpuidle: using governor ladder [ 0.723613] cpuidle: using governor menu [ 0.723900] ASID allocator initialised with 65536 entries [ 0.725999] Serial: AMBA PL011 UART driver [ 0.745505] platform a40000.pinctrl: Fixed dependency cycle(s) with /bus@f0000/pinctrl@a40000/cpsw-cpts [ 0.764121] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.764132] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.764137] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.764140] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.764143] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.764146] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.764150] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.764152] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.768387] ACPI: Interpreter disabled. [ 0.770875] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [ 0.773300] iommu: Default domain type: Translated [ 0.773310] iommu: DMA domain TLB invalidation policy: strict mode [ 0.773680] SCSI subsystem initialized [ 0.774111] usbcore: registered new interface driver usbfs [ 0.774150] usbcore: registered new interface driver hub [ 0.774178] usbcore: registered new device driver usb [ 0.775716] pps_core: LinuxPPS API ver. 1 registered [ 0.775720] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.775739] PTP clock support registered [ 0.775893] EDAC MC: Ver: 3.0.0 [ 0.777882] omap-mailbox 29000000.mailbox: omap mailbox rev 0x66fc9100 [ 0.778730] FPGA manager framework [ 0.778841] Advanced Linux Sound Architecture Driver Initialized. [ 0.779835] vgaarb: loaded [ 0.780227] clocksource: Switched to clocksource arch_sys_counter [ 0.780502] VFS: Disk quotas dquot_6.6.0 [ 0.780546] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.780771] pnp: PnP ACPI: disabled [ 0.787387] NET: Registered PF_INET protocol family [ 0.787754] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.789565] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear) [ 0.789616] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.789636] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.789861] TCP bind hash table entries: 16384 (order: 8, 1310720 bytes, linear) [ 0.791300] TCP: Hash tables configured (established 16384 bind 16384) [ 0.791522] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear) [ 0.791677] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear) [ 0.792051] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.792594] RPC: Registered named UNIX socket transport module. [ 0.792601] RPC: Registered udp transport module. [ 0.792603] RPC: Registered tcp transport module. [ 0.792606] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.792617] PCI: CLS 0 bytes, default 64 [ 0.807333] kvm [1]: IPA Size Limit: 40 bits [ 0.808497] kvm [1]: vgic-v2@100010000 [ 0.808524] kvm [1]: GIC system register CPU interface enabled [ 0.823289] kvm [1]: vgic interrupt IRQ9 [ 0.851252] kvm [1]: Hyp mode initialized successfully [ 0.852815] Initialise system trusted keyrings [ 0.853032] workingset: timestamp_bits=58 max_order=19 bucket_order=0 [ 0.859966] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.860581] NFS: Registering the id_resolver key type [ 0.860621] Key type id_resolver registered [ 0.860624] Key type id_legacy registered [ 0.860714] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.860719] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.860933] 9p: Installing v9fs 9p2000 file system support [ 0.896232] Key type asymmetric registered [ 0.896239] Asymmetric key parser 'x509' registered [ 0.896308] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.896314] io scheduler mq-deadline registered [ 0.896319] io scheduler kyber registered [ 0.908059] pinctrl-single 4084000.pinctrl: 34 pins, size 136 [ 0.908776] pinctrl-single f4000.pinctrl: 171 pins, size 684 [ 0.911012] pinctrl-single a40000.pinctrl: 512 pins, size 2048 [ 0.921390] EINJ: ACPI disabled. [ 0.952073] Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled [ 0.958128] SuperH (H)SCI(F) driver initialized [ 0.958956] msm_serial: driver initialized [i0.995566] loop: module loaded [ [ 1.219969] printk: console [ttyS2] printing thread started 0.997745] megasas: 07.719.03.00-rc1 [ 1.219988] printk: console [ttyS2] enabled [ 1.219993] printk: bootconsole [ns16550a0] disabled [ 1.229298] printk: bootconsole [ns16550a0] printing thread stopped [ 1.232118] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [ 1.232386] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [ 1.232392] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [ 1.232957] pps pps0: new PPS source ptp0 [ 1.233227] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:1 [ 1.245774] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [ 1.254902] mmc0: CQHCI version 5.10 [ 1.269248] pca953x 1-0022: supply vcc not found, using dummy regulator [ 1.269401] pca953x 1-0022: using AI [ 1.289367] spi-nor spi0.0: s28hs512t (65536 Kbytes) [ 1.289491] 7 fixed-partitions partitions found on MTD device fc40000.spi.0 [ 1.289501] Creating 7 MTD partitions on "fc40000.spi.0": [ 1.289508] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 1.291007] 0x000000080000-0x000000280000 : "ospi.tispl" [ 1.292182] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 1.293376] 0x000000680000-0x0000006c0000 : "ospi.env" [ 1.294580] 0x0000006c0000-0x000000700000 : "ospi.env.backup" [ 1.295777] 0x000000800000-0x000003fc0000 : "ospi.rootfs" [ 1.296993] 0x000003fc0000-0x000004000000 : "ospi.phypattern" [ 1.298419] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [ 1.324462] mmc1: CQHCI version 5.10 [ 1.328064] mmc2: CQHCI version 5.10 [ 1.332738] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 1.335513] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [ 1.341298] ti-sci-clk 44043000.system-controller:clock-controller: is_prepared failed for dev=81, clk=20, ret=-19 [ 1.346970] ALSA device list: [ 1.346976] No soundcards found. [ 1.365193] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [ 1.369950] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [ 1.370606] Waiting for root device PARTUUID=d2c3753a-02... [ 1.375549] sdhci-am654 fa20000.mmc: card claims to support voltages below defined range [ 1.389044] mmc2: new high speed SDIO card at address 0001 [ 1.389801] mmc0: Command Queue Engine enabled [ 1.389812] mmc0: new HS200 MMC card at address 0001 [ 1.390497] mmcblk0: mmc0:0001 S0J56X 14.8 GiB [ 1.392180] mmcblk0: p1 [ 1.392791] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB [ 1.394083] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB [ 1.395243] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (511:0) [ 1.414528] mmc1: new ultra high speed SDR104 SDXC card at address 0001 [ 1.415425] mmcblk1: mmc1:0001 BC2QT 59.6 GiB [ 1.417516] mmcblk1: p1 p2 [ 1.434310] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none. [ 1.434400] VFS: Mounted root (ext4 filesystem) on device 179:98. [ 1.435060] devtmpfs: mounted [ 1.440386] Freeing unused kernel memory: 7296K [ 1.440527] Run /sbin/init as init process [ 1.618051] systemd[1]: System time before build time, advancing clock. [ 1.645834] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 1.646660] systemd[1]: Detected architecture arm64. Welcome to Arago 2023.10! [ 1.689569] systemd[1]: Hostname set to . [ 1.796367] systemd-sysv-generator[173]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 1.949953] systemd[1]: Configuration file /lib/systemd/system/ti-apps-launcher.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 1.966310] systemd[1]: Configuration file /lib/systemd/system/seva-launcher.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 2.004402] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. [ 2.004442] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. [ 2.038304] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 2.087826] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 2.149419] systemd[1]: Queued start job for default target Graphical Interface. [ OK ] Created slice Slice /system/getty 2.184212] systemd[1]: Created slice Slice /system/getty. 0m. [ 2.200104] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 2.216064] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ OK ] Created slice User and Session Slic[ 2.231542] systemd[1]: Created slice User and Session Slice. e. [ OK ] Started Dispatch Password …ts to [ 2.245766] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. Console Directory Watch. [ OK ] Started Forward Password R…uests [ 2.263635] systemd[1]: Started Forward Password Requests to Wall Directory Watch. to Wall Directory Watch. [ OK ] Reached target Path Units. [ 2.282746] systemd[1]: Reached target Path Units. [ 2.293190] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ OK ] Reached target Slice Units. [ 2.307397] systemd[1]: Reached target Slice Units. [ OK ] Reached target Swaps. [ 2.317957] systemd[1]: Reached target Swaps. [ OK ] Listening on RPCbind Server Activat[ 2.332600] systemd[1]: Listening on RPCbind Server Activation Socket. ion Socket. [ OK ] Reached target RPC Port Mapper.[ 2.347467] systemd[1]: Reached target RPC Port Mapper. [ OK ] Listening on Process Core Dump Sock[ 2.367810] systemd[1]: Listening on Process Core Dump Socket. et. [ OK ] Listening on initctl Compatibility [ 2.382827] systemd[1]: Listening on initctl Compatibility Named Pipe. Named Pipe. [ OK ] Listening on Journal Audit Socket 2.398327] systemd[1]: Listening on Journal Audit Socket. 0m. [ OK ] Listening on Journal Socket (/dev/l[ 2.413020] systemd[1]: Listening on Journal Socket (/dev/log). og). [ 2.428089] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ OK ] Listening on Network Service Netlin[ 2.442382] systemd[1]: Listening on Network Service Netlink Socket. k Socket. [ OK ] Listening on udev Control Socket 2.458790] systemd[1]: Listening on udev Control Socket. m. [ OK ] Listening on udev Kernel Socket[ 2.472907] systemd[1]: Listening on udev Kernel Socket. . [ OK ] Listening on User Database Manager [ 2.487004] systemd[1]: Listening on User Database Manager Socket. Socket. Mounting Huge Pages File System... [ 2.512793] systemd[1]: Mounting Huge Pages File System... Mounting POSIX Message Queue File System..[ 2.527614] systemd[1]: Mounting POSIX Message Queue File System... . Mounting Kernel Debug File System... [ 2.547205] systemd[1]: Mounting Kernel Debug File System... [ 2.559193] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). Mounting Temporary Directory /tmp... [ 2.564302] systemd[1]: Mounting Temporary Directory /tmp... [ 2.583693] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/6.1.80-rt26-dirty/modules.devname). [ 2.588006] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 2.634106] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... Starting Load Kernel Module fuse... [ 2.649647] systemd[1]: Starting Load Kernel Module fuse... Starting Start psplash boot splash screen.[ 2.670532] systemd[1]: Starting Start psplash boot splash screen... .. [ 2.704116] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 2.714812] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [ 2.716139] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 2.716159] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 2.721879] systemd[1]: Starting Journal Service... Starting Journal Service... [ 2.776123] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 2.795103] systemd[1]: Starting Generate network units from Kernel command line... Starting Generate network …ts from Kernel command line... Starting Remount Root and Kernel File Systems systemd[1]: Starting Remount Root and Kernel File Systems... [0m... [ 2.846732] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none. Starting Coldplug All udev Devices... [ 2.856298] systemd[1]: Starting Coldplug All udev Devices... [ OK ] Started RPC Bind. [ 2.877934] systemd[1]: Started RPC Bind. [ OK ] Started Journal Service. [ 2.887646] systemd[1]: Started Journal Service. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory /tmp. [ OK ] Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [FAILED] Failed to start Start psplash boot splash screen. See 'systemctl status psplash-start.service' for details. [DEPEND] Dependency failed for Star…progress communication helper. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Finished Generate network units from Kernel command line. [ OK ] Finished Remount Root and Kernel File Systems. Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... Starting Apply Kernel Variables... [ 3.104063] systemd-journald[184]: Received client request to flush runtime journal. Starting Create Static Device Nodes in /dev... [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Mounting /media/ram... Mounting /var/volatile... Starting Rule-based Manage…for Device Events and Files... [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. [ OK ] Started Rule-based Manager for Device Events and Files. Starting Network Time Synchronization... Starting Record System Boot/Shutdown in UTMP... [ OK ] Finished Record System Boot/Shutdown in UTMP. [ 3.612275] random: crng init done [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Coldplug All udev Devices. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timer Units. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API... [ OK ] Listening on dropbear.socket. [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. Starting Weston socket... Starting D-Bus System Message Bus... Starting Reboot and dump vmcore via kexec... [ OK ] Listening on Docker Socket for the API. [ OK ] Listening on Weston socket. [ OK ] Reached target Socket Units. [ OK ] Finished Reboot and dump vmcore via kexec. [ OK ] Found device /dev/ttyS2. [ OK ] Started D-Bus System Message Bus. [ OK ] Reached target Basic System. [ OK ] Started Job spooling tools. [ OK ] Started Periodic Command Scheduler. Starting DEMO... Starting Print notice about GPLv3 packages... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... [ OK ] Started irqbalance daemon. Starting Telephony service... Starting PulseAudio Sound System... Starting Expand the rootfs…ll size of the boot device.... [ OK ] Started Seva Launcher Service. [ OK ] Started strongSwan IPsec I…IKEv2 daemon using ipsec.conf. Starting User Login Management... [ OK ] Started TEE Supplicant. Starting Telnet Server... [ OK ] Started ti-apps-launcher service. [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Finished Telnet Server. [ OK ] Started Telephony service. [ OK ] Reached target Preparation for Network. Starting Network Configuration... [ OK ] Started DEMO. [ OK ] Started User Login Management. [ OK ] Started PulseAudio Sound System. [ OK ] Finished Expand the rootfs…full size of the boot device.. [ OK ] Started Network Configuration. Starting Network Name Resolution... [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. Starting Avahi mDNS/DNS-SD Stack... Starting Enable and configure wl18xx bluetooth stack... Starting containerd container runtime... [ OK ] Started Netperf Benchmark Server. [ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Simple Network Ma…ent Protocol (SNMP) Daemon.... Starting Permit User Sessions... [ OK ] Finished Enable and configure wl18xx bluetooth stack. [ OK ] Finished Permit User Sessions. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... Starting Weston, a Wayland…ositor, as a system service... [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ OK ] Created slice Slice /system/systemd-fsck. Starting User Database Manager... [ OK ] Found device /dev/mmcblk0p1. Starting File System Check on /dev/mmcblk0p1... [ OK ] Started User Database Manager. [ OK ] Finished File System Check on /dev/mmcblk0p1. [ OK ] Created slice User Slice of UID 1000. Mounting /run/media/mmcblk0p1... Starting User Runtime Directory /run/user/1000... [ 7.177684] audit: type=1701 audit(1651167750.560:2): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=743 comm="kmsprint" exe="/usr/bin/kmsprint" sig=6 res=1 [ 7.178392] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [ OK ] Finished User Runtime Directory /run/user/1000. [ OK ] Mounted /run/media/mmcblk0p1. Starting User Manager for UID 1000... [ OK ] Created slice Slice /system/systemd[ 7.258791] audit: type=1006 audit(1651167750.641:3): pid=769 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 -coredump. [ 7.259040] audit: type=1300 audit(1651167750.641:3): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffd60abde8 a2=4 a3=ffffb3ab0020 items=0 ppid=1 pid=769 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) [ 7.260279] audit: type=1327 audit(1651167750.641:3): proctitle="(systemd)" [ OK ] Started Process Core Dump (PID 760/UID 0). [ OK ] Found device /dev/mmcblk1p1. Starting File System Check on /dev/mmcblk1p1... [ OK ] Finished File System Check on /dev/mmcblk1p1. Mounting /run/media/boot-mmcblk1p1... [ OK ] Started Simple Network Man…ement Protocol (SNMP) Daemon.. [ OK ] Mounted /run/media/boot-mmcblk1p1. [ OK ] Started User Manager for UID 1000. [ OK ] Started Session c1 of User weston. [ 8.011278] audit: type=1006 audit(1651167751.393:4): pid=709 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1 [ 8.011308] audit: type=1300 audit(1651167751.393:4): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffd60abde8 a2=4 a3=ffffb3ab0020 items=0 ppid=1 pid=709 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty7 ses=2 comm="(weston)" exe="/lib/systemd/systemd" key=(null) [ 8.011321] audit: type=1327 audit(1651167751.393:4): proctitle="(weston)" [FAILED] Failed to start Weston, a …mpositor, as a system service. See 'systemctl status weston.service' for details. Starting Weston, a Wayland…ositor, as a system service... [ OK ] Started Session c2 of User weston. [ 8.474142] audit: type=1006 audit(1651167751.856:5): pid=804 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=3 res=1 [ 8.475157] audit: type=1300 audit(1651167751.856:5): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffd60abde8 a2=4 a3=0 items=0 ppid=1 pid=804 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty7 ses=3 comm="(weston)" exe="/lib/systemd/systemd" key=(null) [ 8.475180] audit: type=1327 audit(1651167751.856:5): proctitle="(weston)" [FAILED] Failed to start Weston, a …mpositor, as a system service. See 'systemctl status weston.service' for details. Starting Weston, a Wayland…ositor, as a system service... [ OK ] Started Session c3 of User weston. [FAILED] Failed to start Weston, a …mpositor, as a system service. See 'systemctl status weston.service' for details. Starting Weston, a Wayland…ositor, as a system service... [ OK ] Started Session c4 of User weston. [ OK ] Started containerd container runtime. [FAILED] Failed to start Weston, a …mpositor, as a system service. See 'systemctl status weston.service' for details. Starting Weston, a Wayland…ositor, as a system service... [ OK ] Started Session c5 of User weston. [FAILED] Failed to start Weston, a …mpositor, as a system service. See 'systemctl status weston.service' for details. [FAILED] Failed to start Weston, a …mpositor, as a system service. See 'systemctl status weston.service' for details. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPL-3.0 packages: adwaita-icon-theme-symbolic autoconf bash-dev bash bc binutils cifs-utils coreutils-stdbuf coreutils cpio cpp-symlinks cpp dosfstools elfutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbserver gettext glmark2 gnu-config grep grub-common grub-editenv grub-efi gzip hidapi less libasm1 libatomic-dev libatomic1 libbfd libdebuginfod1 libdw1 libeigen-dev libelf1 libgcc-s-dev libgcc1 libgdbm-compat4 libgdbm-dev libgdbm6 libgettextlib libgettextsrc libgmp10 libidn2-0 libmpc3 libmpfr6 libopcodes libqt5charts-examples libqt5charts-plugins libqt5charts-qmlplugins libqt5charts5 libqt5sensors-plugins libqt5sensors-qmlplugins libqt5sensors5 libqt5serialport-examples libqt5serialport-plugins libqt5serialport-qmlplugins libqt5serialport5 libqt5svg-examples libqt5svg-plugins libqt5svg-qmlplugins libqt5svg5 libqt5virtualkeyboard-plugins libqt5virtualkeyboard-qmlplugins libqt5virtualkeyboard5 libqt5webchannel-plugins libqt5webchannel-qmlplugins libqt5webchannel5 libreadline-dev libreadline8 libstdc++-dev libstdc++6 libunistring2 m4-dev m4 make nettle parted piglit qt3d-plugins qt3d-qmlplugins qt3d qtbase-examples qtbase-plugins qtbase-qmlplugins qtbase qtconnectivity-plugins qtconnectivity-qmlplugins qtconnectivity qtdeclarative-plugins qtdeclarative-qmlplugins qtdeclarative-tools qtdeclarative qtgraphicaleffects-qmlplugins qtlocation-examples qtlocation-plugins qtlocation-qmlplugins qtlocation qtmultimedia-examples qtmultimedia-plugins qtmultimedia-qmlplugins qtmultimedia qtquick3d-plugins qtquick3d-qmlplugins qtquick3d qtquics-qmlplugins.control qtquics2-plugins.control qtquics2-qmlplugins.control qtquics2.control qtscript-examples qtscript-plugins qtscript-qmlplugins qtscript qtwayland-examples qtwayland-plugins qtwayland-qmlplugins qtwayland tar which If you do not wish to distribute GPL-3.0 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Finished Print notice about GPLv3 packages. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Record Runlevel Change in UTMP... [ OK ] Finished Record Runlevel Change in UTMP. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project am62xx-evm - Arago 2023.10 am62xx-evm - am62xx-evm login: [ 11.753872] platform leds: deferred probe pending [ 11.753889] platform 2b300050.target-module: deferred probe pending am62xx-evm login: root [ 41.132027] kauditd_printk_skb: 10 callbacks suppressed [ 41.132043] audit: type=1006 audit(1651167784.514:10): pid=1207 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=7 res=1 [ 41.132059] audit: type=1300 audit(1651167784.514:10): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffd60abde8 a2=1 a3=0 items=0 ppid=1 pid=1207 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=7 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) [ 41.132071] audit: type=1327 audit(1651167784.514:10): proctitle="(systemd)" root@am62xx-evm:~# ls /dev/ autofs i2c-0 loop6 mtd0ro mtdblock0 pts ptypc tty tty2 tty31 tty43 tty55 ttyS0 ttyp1 ttype vcsa vcsu5 block i2c-1 loop7 mtd1 mtdblock1 ptyp0 ptypd tty0 tty20 tty32 tty44 tty56 ttyS1 ttyp2 ttypf vcsa1 vcsu6 char initctl mem mtd1ro mtdblock2 ptyp1 ptype tty1 tty21 tty33 tty45 tty57 ttyS10 ttyp3 ubi_ctrl vcsa2 vcsu7 console kmsg mmcblk0 mtd2 mtdblock3 ptyp2 ptypf tty10 tty22 tty34 tty46 tty58 ttyS11 ttyp4 udev_network_queue vcsa3 vfio cpu_dma_latency kvm mmcblk0boot0 mtd2ro mtdblock4 ptyp3 random tty11 tty23 tty35 tty47 tty59 ttyS2 ttyp5 urandom vcsa4 vga_arbiter disk log mmcblk0boot1 mtd3 mtdblock5 ptyp4 shm tty12 tty24 tty36 tty48 tty6 ttyS3 ttyp6 vcs vcsa5 zero dma_heap loop-control mmcblk0p1 mtd3ro mtdblock6 ptyp5 snapshot tty13 tty25 tty37 tty49 tty60 ttyS4 ttyp7 vcs1 vcsa6 fd loop0 mmcblk0rpmb mtd4 net ptyp6 snd tty14 tty26 tty38 tty5 tty61 ttyS5 ttyp8 vcs2 vcsa7 full loop1 mmcblk1 mtd4ro null ptyp7 stderr tty15 tty27 tty39 tty50 tty62 ttyS6 ttyp9 vcs3 vcsu gpiochip0 loop2 mmcblk1p1 mtd5 port ptyp8 stdin tty16 tty28 tty4 tty51 tty63 ttyS7 ttypa vcs4 vcsu1 gpiochip1 loop3 mmcblk1p2 mtd5ro pps0 ptyp9 stdout tty17 tty29 tty40 tty52 tty7 ttyS8 ttypb vcs5 vcsu2 gpiochip2 loop4 mqueue mtd6 ptmx ptypa tee0 tty18 tty3 tty41 tty53 tty8 ttyS9 ttypc vcs6 vcsu3 hugepages loop5 mtd0 mtd6ro ptp0 ptypb teepriv0 tty19 tty30 tty42 tty54 tty9 ttyp0 ttypd vcs7 vcsu4 root@am62xx-evm:~# uname -r 6.1.80-rt26-dirty root@am62xx-evm:~# dmesg | grep spi [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=d2c3753a-02 rw rootfstype=ext4 rootwait [ 1.289367] spi-nor spi0.0: s28hs512t (65536 Kbytes) [ 1.289491] 7 fixed-partitions partitions found on MTD device fc40000.spi.0 [ 1.289501] Creating 7 MTD partitions on "fc40000.spi.0": [ 1.289508] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 1.291007] 0x000000080000-0x000000280000 : "ospi.tispl" [ 1.292182] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 1.293376] 0x000000680000-0x0000006c0000 : "ospi.env" [ 1.294580] 0x0000006c0000-0x000000700000 : "ospi.env.backup" [ 1.295777] 0x000000800000-0x000003fc0000 : "ospi.rootfs" [ 1.296993] 0x000003fc0000-0x000004000000 : "ospi.phypattern" root@am62xx-evm:~# cd /lib/modules/6.1.80-rt26-ti-rt-g3c08dbfd7bfd/kernel/drivers/spi/ root@am62xx-evm:/lib/modules/6.1.80-rt26-ti-rt-g3c08dbfd7bfd/kernel/drivers/spi# ls spi-omap2-mcspi.ko spidev.ko root@am62xx-evm:/lib/modules/6.1.80-rt26-ti-rt-g3c08dbfd7bfd/kernel/drivers/spi# insmod spi-omap2-mcspi.ko insmod: ERROR: could not insert module spi-omap2-mcspi.ko: Inval[ 181.685577] spi_omap2_mcspi: version magic '6.1.80-rt26-ti-rt-g3c08dbfd7bfd SMP preempt_rt mod_unload aarch64' should be '6.1.80-rt26-dirty SMP preempt_rt mod_unload aarch64' id module format root@am62xx-evm:/lib/modules/6.1.80-rt26-ti-rt-g3c08dbfd7bfd/kernel/drivers/spi# insmod spidev.ko insmod: ERROR: could not insert module spidev.ko: Invalid module[ 234.200037] spidev: version magic '6.1.80-rt26-ti-rt-g3c08dbfd7bfd SMP preempt_rt mod_unload aarch64' should be '6.1.80-rt26-dirty SMP preempt_rt mod_unload aarch64' format root@am62xx-evm:/lib/modules/6.1.80-rt26-ti-rt-g3c08dbfd7bfd/kernel/drivers/spi# uname -r 6.1.80-rt26-dirty root@am62xx-evm:/lib/modules/6.1.80-rt26-ti-rt-g3c08dbfd7bfd/kernel/drivers/spi#