Scenario 1 ---------------- U-Boot SPL 2023.04-dirty (Jul 03 2024 - 10:35:40 +0530) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') EEPROM not available at 0x54, trying to read at 0x55 Reading on-board EEPROM at 0x55 failed -121 i2c_write: error waiting for data ACK (status=0x116) read error from device: 41c86594 register: x! -----------spl_board_init---------- Trying to boot from MMC2 Loading Environment from nowhere... OK Starting ATF on ARM64 core... NOTICE: BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty NOTICE: BL31: Built : 16:09:05, Feb 9 2024 I/TC: I/TC: OP-TEE version: 4.1.0-51-g012cdca49 (gcc version 11.4.0 (GCC)) #1 Tue Jan 30 10:48:03 UTC 2024 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: GIC redistributor base address not provided I/TC: Assuming default GIC group status and modifier I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') I/TC: HUK Initialized I/TC: Activated SA2UL device I/TC: Fixing SA2UL firewall owner for GP device I/TC: Enabled firewalls for SA2UL TRNG device I/TC: SA2UL TRNG initialized I/TC: SA2UL Drivers initialized I/TC: Primary CPU switching to normal world boot U-Boot SPL 2023.04-dirty (Jul 03 2024 - 10:35:35 +0530) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') Scenario 2 ---------------- U-Boot SPL 2023.04-dirty (Jul 03 2024 - 10:35:40 +0530) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') EEPROM not available at 0x54, trying to read at 0x55 Reading on-board EEPROM at 0x55 failed -121 i2c_write: error waiting for data ACK (status=0x116) read error from device: 41c86594 register: x! -----------spl_board_init---------- Trying to boot from MMC2 Loading Environment from nowhere... OK Starting ATF on ARM64 core... NOTICE: BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty NOTICE: BL31: Built : 16:09:05, Feb 9 2024 I/TC: I/TC: OP-TEE version: 4.1.0-51-g012cdca49 (gcc version 11.4.0 (GCC)) #1 Tue Jan 30 10:48:03 UTC 2024 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: GIC redistributor base address not provided I/TC: Assuming default GIC group status and modifier I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') I/TC: HUK Initialized E/TC:0 0 k3_sec_proxy_verify_thread:108 Queue is busy E/TC:0 0 k3_sec_proxy_recv:196 Thread SEC_PROXY_RESPONSE_THREAD verification failed. ret = -65523 E/TC:0 0 ti_sci_get_response:101 Message receive failed (-65523) E/TC:0 0 ti_sci_do_xfer:150 Failed to get response (-65523) E/TC:0 0 sa2ul_init:61 Failed to get SA2UL device E/TC:0 0 call_initcalls:43 Initcall __text_start + 0x000710b8 failed E/TC:0 0 E/TC:0 0 Core data-abort at address 0x14 (translation fault) E/TC:0 0 esr 0x96000005 ttbr0 0x9e8a2000 ttbr1 0x00000000 cidr 0x0 E/TC:0 0 cpu #0 cpsr 0x600003c4 E/TC:0 0 x0 000000009e875000 x1 0000000000000000 E/TC:0 0 x2 0000000000000000 x3 0000000000000000 E/TC:0 0 x4 0000000000000420 x5 000000009e892d70 E/TC:0 0 x6 ffffffffffffffb0 x7 0000000000010cb0 E/TC:0 0 x8 000000009e892f80 x9 000000009e882070 E/TC:0 0 x10 0000000000000000 x11 0000000000000008 E/TC:0 0 x12 0000000000000000 x13 000000009e8aa050 E/TC:0 0 x14 0000000000000000 x15 0000000000000000 E/TC:0 0 x16 000000009e81cb8c x17 0000000000000000 E/TC:0 0 x18 0000000000000000 x19 000000009e8aa3d0 E/TC:0 0 x20 000000009e8aa3d8 x21 000000009e875000 E/TC:0 0 x22 000000009e875000 x23 000000009e875ee0 E/TC:0 0 x24 000000009e874db0 x25 0000000000000000 E/TC:0 0 x26 0000000000000000 x27 0000000000000000 E/TC:0 0 x28 0000000000000000 x29 000000009e8aa360 E/TC:0 0 x30 000000009e81747c elr 000000009e81748c E/TC:0 0 sp_el0 000000009e8aa360 E/TC:0 0 TEE load address @ 0x9e800000 E/TC:0 0 Call stack: E/TC:0 0 0x9e81748c E/TC:0 0 0x9e807d60 E/TC:0 0 0x9e822658 E/TC:0 0 0x9e807f50 E/TC:0 0 Panic 'unhandled pageable abort' at core/arch/arm/kernel/abort.c:582 E/TC:0 0 TEE load address @ 0x9e800000 E/TC:0 0 Call stack: E/TC:0 0 0x9e808168 E/TC:0 0 0x9e81f098 E/TC:0 0 0x9e807920 E/TC:0 0 0x9e804a98 Scenario 3 ---------------- U-Boot SPL 2023.04-dirty (Jul 03 2024 - 10:35:40 +0530) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') EEPROM not available at 0x54, trying to read at 0x55 Reading on-board EEPROM at 0x55 failed -121 i2c_write: error waiting for data ACK (status=0x116) read error from device: 41c86594 register: x! -----------spl_board_init---------- Trying to boot from MMC2 Loading Environment from nowhere... OK Starting ATF on ARM64 core... NOTICE: BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty NOTICE: BL31: Built : 16:09:05, Feb 9 2024 I/TC: I/TC: OP-TEE version: 4.1.0-51-g012cdca49 (gcc version 11.4.0 (GCC)) #1 Tue Jan 30 10:48:03 UTC 2024 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: GIC redistributor base address not provided I/TC: Assuming default GIC group status and modifier I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') I/TC: HUK Initialized I/TC: Activated SA2UL device I/TC: Fixing SA2UL firewall owner for GP device I/TC: Enabled firewalls for SA2UL TRNG device I/TC: SA2UL TRNG initialized I/TC: SA2UL Drivers initialized I/TC: Primary CPU switching to normal world boot U-Boot SPL 2023.04-dirty (Jul 03 2024 - 10:35:35 +0530) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') EEPROM not available at 0x54, trying to read at 0x55 Reading on-board EEPROM at 0x55 failed -121 -----------spl_board_init---------- --probe daughtercard----------- Trying to boot from MMC2 am654_sdhci mmc@4fb0000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19