U-Boot 2013.10-00189-g78d8ebd-dirty (Aug 19 2015 - 13:29:24) I2C: ready DRAM: 512 MiB NAND: 1024 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Incorrect magic number (0xffffffff) in EEPROM Could not get board ID. Net: Incorrect magic number (0xffffffff) in EEPROM Could not get board ID. Could not get PHY for cpsw: addr 0 cpsw, usb_ether Hit any key to stop autoboot: 0 U-Boot# U-Boot# U-Boot# setenv bootargs 'console=ttyO0,115200n8 root=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048 ip=off' U-Boot# saveenv Saving Environment to NAND... Erasing NAND... Erasing at 0x380000 -- 100% complete. Writing to NAND... OK U-Boot# boot Booting from nand ... NAND read: device 0 offset 0x200000, size 0x80000 524288 bytes read: OK NAND read: device 0 offset 0x480000, size 0x700000 7340032 bytes read: OK Kernel image @ 0x80200000 [ 0x000000 - 0x3f2c68 ] ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Loading Device Tree to 9f31e000, end 9f32b2d3 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.12.10-ti2013.12.01 (root@am335xsdk78-virtual-machine) (gcc version 4.7.3 20130226 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.03-20130313 - Linaro GCC 2013.03) ) #10 Tue Jul 28 18:44:26 IST 2015 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x EVM [ 0.000000] cma: CMA: reserved 24 MiB at 9d800000 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon ) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129280 [ 0.000000] Kernel command line: console=ttyO0,115200n8 mem=512M root=ubi0:rootfs rw ubi.mtd=9,2048 rootfstype=ubifs rootwait=1 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 482984K/521216K available (5535K kernel code, 557K rwdata, 1880K rodata, 714K init, 225K bss, 38232K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc074604c (7417 kB) [ 0.000000] .init : 0xc0747000 - 0xc07f9930 ( 715 kB) [ 0.000000] .data : 0xc07fa000 - 0xc0885598 ( 558 kB) [ 0.000000] .bss : 0xc0885598 - 0xc08bdc40 ( 226 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] OMAP clocksource: timer1 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000266] Calibrating delay loop... 663.55 BogoMIPS (lpj=3317760) [ 0.049747] pid_max: default: 32768 minimum: 301 [ 0.049834] Security Framework initialized [ 0.049877] Mount-cache hash table entries: 512 [ 0.057236] CPU: Testing write buffer coherency: ok [ 0.057614] Setting up static identity map for 0xc056daa8 - 0xc056db18 [ 0.058381] devtmpfs: initialized [ 0.059838] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.119823] omap_hwmod: debugss: _wait_target_disable failed [ 0.120467] pinctrl core: initialized pinctrl subsystem [ 0.121208] regulator-dummy: no parameters [ 0.123337] NET: Registered protocol family 16 [ 0.125202] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.127318] cpuidle: using governor ladder [ 0.127331] cpuidle: using governor menu [ 0.133805] platform mpu.1: FIXME: clock-name 'fck' DOES NOT exist in dt! [ 0.134661] platform 49000000.edma: FIXME: clock-name 'fck' DOES NOT exist in dt! [ 0.135688] OMAP GPIO hardware version 0.1 [ 0.143207] omap-gpmc 50000000.gpmc: could not find pctldev for node /pinmux@44e10800/nandflash_pins_default, deferring probe [ 0.143235] platform 50000000.gpmc: Driver omap-gpmc requests probe deferral [ 0.143531] platform 56000000.sgx: FIXME: clock-name 'fck' DOES NOT exist in dt! [ 0.146671] DSS not supported on this SoC [ 0.146690] No ATAGs? [ 0.146699] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.164436] bio: create slab at 0 [ 0.175682] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.176432] vbat: 5000 mV [ 0.176769] lis3_reg: no parameters [ 0.177147] wlan-en-regulator: 1800 mV [ 0.179662] vgaarb: loaded [ 0.180756] SCSI subsystem initialized [ 0.181815] usbcore: registered new interface driver usbfs [ 0.181968] usbcore: registered new interface driver hub [ 0.182128] usbcore: registered new device driver usb [ 0.182914] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe [ 0.182938] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral [ 0.182961] omap_i2c 4802a000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c1_pins, deferring probe [ 0.182973] platform 4802a000.i2c: Driver omap_i2c requests probe deferral [ 0.183169] media: Linux media interface: v0.10 [ 0.183302] Linux video capture interface: v2.00 [ 0.183513] pps_core: LinuxPPS API ver. 1 registered [ 0.183521] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.183627] PTP clock support registered [ 0.185714] Switched to clocksource timer1 [ 0.200161] NET: Registered protocol family 2 [ 0.200716] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.200783] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.200821] TCP: Hash tables configured (established 4096 bind 4096) [ 0.200888] TCP: reno registered [ 0.200900] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.200915] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.201086] NET: Registered protocol family 1 [ 0.201428] RPC: Registered named UNIX socket transport module. [ 0.201437] RPC: Registered udp transport module. [ 0.201442] RPC: Registered tcp transport module. [ 0.201447] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.202285] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.202858] PM: Loading am335x-pm-firmware.bin [ 0.318537] VFS: Disk quotas dquot_6.5.2 [ 0.318599] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.319127] NFS: Registering the id_resolver key type [ 0.319205] Key type id_resolver registered [ 0.319211] Key type id_legacy registered [ 0.319245] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.319388] msgmni has been set to 991 [ 0.320659] NET: Registered protocol family 38 [ 0.320696] io scheduler noop registered [ 0.320704] io scheduler deadline registered [ 0.320721] io scheduler cfq registered (default) [ 0.322508] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.371145] Console: switching to colour frame buffer device 100x30 [ 0.381254] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.383690] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.030179] console [ttyO0] enabled [ 1.034600] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89, base_baud = 3000000) is a OMAP UART1 [ 1.044698] pinctrl-single 44e10800.pinmux: pin 44e10950.0 already requested by 44e10800.pinmux; cannot claim for 48024000.serial [ 1.056959] pinctrl-single 44e10800.pinmux: pin-84 (48024000.serial) status -22 [ 1.064633] pinctrl-single 44e10800.pinmux: could not request pin 84 (44e10950.0) from group pinmux_uart2_pins on device pinctrl-single [ 1.077507] omap_uart 48024000.serial: Error applying setting, reverse things back [ 1.085673] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90, base_baud = 3000000) is a OMAP UART2 [ 1.096604] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 1.111367] brd: module loaded [ 1.118650] loop: module loaded [ 1.122309] (stk) :sysfs entries created [ 1.126569] (stk) : debugfs entries created [ 1.134695] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.144864] usbcore: registered new interface driver asix [ 1.150751] usbcore: registered new interface driver ax88179_178a [ 1.157314] usbcore: registered new interface driver cdc_ether [ 1.163575] usbcore: registered new interface driver r815x [ 1.169483] usbcore: registered new interface driver smsc95xx [ 1.175667] usbcore: registered new interface driver net1080 [ 1.181726] usbcore: registered new interface driver cdc_subset [ 1.188072] usbcore: registered new interface driver zaurus [ 1.194137] usbcore: registered new interface driver cdc_ncm [ 1.200523] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.207402] ehci-pci: EHCI PCI platform driver [ 1.212230] ehci-omap: OMAP-EHCI Host Controller driver [ 1.218499] usbcore: registered new interface driver cdc_wdm [ 1.224631] usbcore: registered new interface driver usb-storage [ 1.231289] usbcore: registered new interface driver usbserial [ 1.237552] usbcore: registered new interface driver cp210x [ 1.243532] usbserial: USB Serial support registered for cp210x [ 1.249859] usbcore: registered new interface driver pl2303 [ 1.255838] usbserial: USB Serial support registered for pl2303 [ 1.262965] mousedev: PS/2 mouse device common for all mice [ 1.269681] input: ti-tsc as /devices/ocp.2/44e0d000.tscadc/TI-am335x-tsc/input/input0 [ 1.279774] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 1.287935] i2c /dev entries driver [ 1.292050] Driver for 1-wire Dallas network protocol. [ 1.299602] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.308540] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25 [ 1.315680] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24 [ 1.322983] omap_hsmmc 48060000.mmc: unable to get vmmc regulator -517 [ 1.329882] edma-dma-engine edma-dma-engine.0: freeing channel for 24 [ 1.336660] edma-dma-engine edma-dma-engine.0: freeing channel for 25 [ 1.343529] platform 48060000.mmc: Driver omap_hsmmc requests probe deferral [ 1.351172] edma-dma-engine edma-dma-engine.0: allocated channel for 0:13 [ 1.358336] edma-dma-engine edma-dma-engine.0: allocated channel for 0:12 [ 1.438911] omap_hwmod: gpio1: _wait_target_disable failed [ 1.466567] ledtrig-cpu: registered to indicate activity on CPUs [ 1.476314] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36 [ 1.483548] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 1.490819] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 1.496972] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5 [ 1.504061] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6 [ 1.513860] usbcore: registered new interface driver usbhid [ 1.519741] usbhid: USB HID core driver [ 1.525767] oprofile: no performance counters [ 1.530692] oprofile: using timer interrupt. [ 1.535434] TCP: cubic registered [ 1.538944] Initializing XFRM netlink socket [ 1.543487] NET: Registered protocol family 17 [ 1.548212] NET: Registered protocol family 15 [ 1.552918] 8021q: 802.1Q VLAN Support v1.8 [ 1.557398] Key type dns_resolver registered [ 1.562448] cpu cpu0: cpu0 regulator not ready, retry [ 1.567928] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 1.576219] ThumbEE CPU extension supported. [ 1.582455] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 1.587918] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 1.595290] ONFI param page 0 valid [ 1.598996] ONFI flash detected [ 1.602296] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x38 (Micron MT29F8G08ABABAWP), 1024MiB, page size: 4096, OOB size: 224 [ 1.614460] omap2-nand: detected x8 NAND flash [ 1.619129] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme [ 1.624730] omap2-nand: using custom ecc layout [ 1.629674] 10 ofpart partitions found on MTD device omap2-nand.0 [ 1.636088] Creating 10 MTD partitions on "omap2-nand.0": [ 1.641772] 0x000000000000-0x000000080000 : "NAND.SPL" [ 1.648543] 0x000000080000-0x000000100000 : "NAND.SPL.backup1" [ 1.655860] 0x000000100000-0x000000180000 : "NAND.SPL.backup2" [ 1.663104] 0x000000180000-0x000000200000 : "NAND.SPL.backup3" [ 1.670372] 0x000000200000-0x000000280000 : "NAND.u-boot-spl-os" [ 1.677851] 0x000000280000-0x000000380000 : "NAND.u-boot" [ 1.684595] 0x000000380000-0x000000400000 : "NAND.u-boot-env" [ 1.691701] 0x000000400000-0x000000480000 : "NAND.u-boot-env.backup1" [ 1.699548] 0x000004800000-0x000004f00000 : "NAND.kernel" [ 1.706967] 0x000000b80000-0x000040000000 : "NAND.file-system" [ 1.819861] tps65910 0-002d: No interrupt support, no core IRQ [ 1.827903] vrtc: 1800 mV [ 1.830995] vrtc: supplied by vbat [ 1.835704] vio: at 1800 mV [ 1.838820] vio: supplied by vbat [ 1.843530] vdd_mpu: 912 <--> 1375 mV at 1325 mV [ 1.848539] vdd_mpu: supplied by vbat [ 1.853614] vdd_core: 912 <--> 1150 mV at 1137 mV [ 1.858711] vdd_core: supplied by vbat [ 1.863676] vdd3: 5000 mV [ 1.867563] vdig1: at 1800 mV [ 1.870830] vdig1: supplied by vbat [ 1.875547] vdig2: at 1800 mV [ 1.878820] vdig2: supplied by vbat [ 1.883545] vpll: at 1800 mV [ 1.886728] vpll: supplied by vbat [ 1.891357] vdac: at 1800 mV [ 1.894523] vdac: supplied by vbat [ 1.899163] vaux1: at 1800 mV [ 1.902422] vaux1: supplied by vbat [ 1.907145] vaux2: at 3300 mV [ 1.910397] vaux2: supplied by vbat [ 1.915103] vaux33: at 3300 mV [ 1.918474] vaux33: supplied by vbat [ 1.923275] vmmc: 1800 <--> 3300 mV at 3300 mV [ 1.928105] vmmc: supplied by vbat [ 1.932387] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.940780] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz [ 1.947538] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25 [ 1.954692] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24 [ 1.996998] UBI: attaching mtd9 to ubi0 [ 2.091509] mmc1: new high speed SDHC card at address aaaa [ 2.106401] mmcblk0: mmc1:aaaa SS08G 7.40 GiB [ 2.117479] mmcblk0: p1 p2 [ 3.035175] UBI: scanning is finished [ 3.048314] UBI: attached mtd9 (name "NAND.file-system", size 1012 MiB) to ubi0 [ 3.056048] UBI: PEB size: 524288 bytes (512 KiB), LEB size: 520192 bytes [ 3.063167] UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 1024 [ 3.070208] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 3.077425] UBI: good PEBs: 2025, bad PEBs: 0, corrupted PEBs: 0 [ 3.083725] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 3.091218] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1499472693 [ 3.100717] UBI: available PEBs: 0, total reserved PEBs: 2025, PEBs reserved for bad PEB handling: 40 [ 3.110405] UBI: background thread "ubi_bgt0d" started, PID 839 [ 3.175740] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 3.182150] davinci_mdio 4a101000.mdio: detected phy mask 7fffffff [ 3.189250] libphy: 4a101000.mdio: probed [ 3.193475] davinci_mdio 4a101000.mdio: phy[31]: device 4a101000.mdio:1f, driver unknown [ 3.202661] Detected MACID = d0:5f:b8:87:07:58 [ 3.208687] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.220934] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19 [ 3.228978] VFS: Cannot open root device "ubi0:rootfs" or unknown-block(0,0): error -19 [ 3.237381] Please append a correct "root=" boot option; here are the available partitions: [ 3.246188] 1f00 512 mtdblock0 (driver?) [ 3.251493] 1f01 512 mtdblock1 (driver?) [ 3.256804] 1f02 512 mtdblock2 (driver?) [ 3.262108] 1f03 512 mtdblock3 (driver?) [ 3.267418] 1f04 512 mtdblock4 (driver?) [ 3.272718] 1f05 1024 mtdblock5 (driver?) [ 3.278029] 1f06 512 mtdblock6 (driver?) [ 3.283329] 1f07 512 mtdblock7 (driver?) [ 3.288638] 1f08 7168 mtdblock8 (driver?) [ 3.293942] 1f09 1036800 mtdblock9 (driver?) [ 3.299252] b300 7761920 mmcblk0 driver: mmcblk [ 3.304827] b301 72261 mmcblk0p1 00000000-01 [ 3.310412] b302 7679070 mmcblk0p2 00000000-02 [ 3.315994] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)