AM335x DDR3 Software Leveling -- Version: Beta 3.0
                              -- Copyright: Texas Instruments China Local Team
 *************************** Program Start********************************

Please input the AM335x EMIF Timing Configuration:
-- AM335x Default EMIF Timing configuration (for StarterKit EVM) --
DDR3_EMIF_SDRAM_TIM_1 : 0x0888A39B
DDR3_EMIF_SDRAM_TIM_2 : 0x26337FDA
DDR3_EMIF_SDRAM_TIM_3 : 0x501F830F
DDR3_EMIF_SDRAM_CONFIG : 0x61C04AB2

Your choice:  1. Use the default one; 2. Input your own one.
Please Choose The DDR3 Frequency:  1. 303MHz; 2. 400MHz.
DDR3 Frequency is Set at 400MHz!

Please input your DDR3_EMIF_SDRAM_TIM_1 conifguration (in Hex) :
0AAAD4DB
Please input your DDR3_EMIF_SDRAM_TIM_2 conifguration (in Hex) :
248F7FDA
Please input your DDR3_EMIF_SDRAM_TIM_3 conifguration (in Hex) :
50FFE8BF
Please input your DDR3_EMIF_SDRAM_CONFIG conifguration (in Hex) :
61A053B2
Your input EMIF Timing configuration --
DDR3_EMIF_SDRAM_TIM_1 :         0xAAAD4DB
DDR3_EMIF_SDRAM_TIM_2 :         0x248F7FDA
DDR3_EMIF_SDRAM_TIM_3 :         0x50FFE8BF
DDR3_EMIF_SDRAM_CONFIG :        0x61A053B2

Please Enter the PHY_INVERT_CLKOUT value (0 or 1) from the spreadsheet :
1
Please Enter the Seed RD_DQS_SLAVE_RATIO Value in Hex to search the RD DQS Ratio Window :
40
Please Enter the Seed FIFO_WE_SLAVE_RATIO Value in Hex to search the RD DQS Gate Window :
128
Please Enter the Seed WR_DQS_SLAVE_RATIO Write DQS Ratio Value in Hex to search the Write DQS Ratio Window :
80
Please Enter the Seed PHY_CTRL_SLAVE_RATIO Value in Hex :
100
The ratio seeds for the DDR3 Software Leveling :
invert_clkout =         0x1
RD_DQS_RATIO_VAL =      0x40
FIFO_WE_SLAVE_RATIO =   0x128
WR_DQS_SLAVE_RATIO =    0x80
PHY_CTRL_SLAVE_RATIO =  0x100

        The Slave Ratio Search Program Values are...
***************************************************************
DATA_PHY_RD_DQS_SLAVE_RATIO is :0x0
DATA_PHY_FIFO_WE_SLAVE_RATIO is : 0x0
DATA_PHY_WR_DQS_SLAVE_RATIO is : 0x0
DATA_PHY_WR_DATA_SLAVE_RATIO is : 0x0
***************************************************************
rd_dqs_range = 0
fifo_we_range = 0
wr_dqs_range = 0
wr_data_range = 0

Optimal values have been found!!

***************************************************************
DATA_PHY_RD_DQS_SLAVE_RATIO is :0x0
DATA_PHY_FIFO_WE_SLAVE_RATIO is : 0x0
DATA_PHY_WR_DQS_SLAVE_RATIO is : 0x0
DATA_PHY_WR_DATA_SLAVE_RATIO is : 0x0
***************************************************************

===== END OF TEST =====
DDR3 software leveling done!