U-Boot SPL 2016.05 (Jan 29 2018 - 17:11:58) Trying to boot from MMC1 reading args spl_load_image_fat_os: error reading image args, err - -1 reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05 (Jan 29 2018 - 17:11:58 +0800) Watchdog enabled DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment not set. Validating first E-fuse MAC Net: Warning: usb_ether MAC addresses don't match: Address in SROM is de:ad:be:ef:00:01 Address in environment is 80:30:dc:80:ee:56 eth0: usb_ether Press SPACE to abort autoboot in 2 seconds switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 22 bytes read in 4 ms (4.9 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... reading /am335x-bcu-aap.dtb 36374 bytes read in 10 ms (3.5 MiB/s) switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 22 bytes read in 4 ms (4.9 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... 3394824 bytes read in 315 ms (10.3 MiB/s) 36142 bytes read in 52 ms (678.7 KiB/s) Kernel image @ 0x82000000 [ 0x000000 - 0x33cd08 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8fff4000, end 8ffffd2d ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.19-rt25-gf572d285f0 (root@tqma28bsp109-VirtualBox) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #4 PREEMPT RT Mon Jan 22 16:30:06 AWST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM3359 ICE-V2 [ 0.000000] cma: Reserved 24 MiB at 0x9e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon ) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=PARTUUID=00030691-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 484936K/524288K available (6039K kernel code, 296K rwdata, 2256K rodata, 612K init, 273K bss, 14776K reserved, 24576K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0822104 (8297 kB) [ 0.000000] .init : 0xc0823000 - 0xc08bc000 ( 612 kB) [ 0.000000] .data : 0xc08bc000 - 0xc09062c0 ( 297 kB) [ 0.000000] .bss : 0xc09062c0 - 0xc094a738 ( 274 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU kthread priority: 1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000029] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000037] OMAP clocksource: timer1 at 24000000 Hz [ 0.000183] clocksource_probe: no matching clocksources found [ 0.000386] Console: colour dummy device 80x30 [ 0.000553] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000555] This ensures that you still see kernel messages. Please [ 0.000557] update your kernel commandline. [ 0.089181] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216) [ 0.089187] pid_max: default: 32768 minimum: 301 [ 0.089324] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.089330] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090107] Initializing cgroup subsys io [ 0.090131] Initializing cgroup subsys memory [ 0.090174] Initializing cgroup subsys devices [ 0.090187] Initializing cgroup subsys freezer [ 0.090198] Initializing cgroup subsys perf_event [ 0.090207] Initializing cgroup subsys pids [ 0.090287] CPU: Testing write buffer coherency: ok [ 0.090704] Setting up static identity map for 0x80008200 - 0x80008258 [ 0.093382] devtmpfs: initialized [ 0.105283] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.171912] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.174343] pinctrl core: initialized pinctrl subsystem [ 0.175800] NET: Registered protocol family 16 [ 0.178099] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.183133] omap_gpio 44e07000.gpio: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/gpio0_pins_default, deferring probe [ 0.183428] omap_gpio 4804c000.gpio: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/gpio1_pins_default, deferring probe [ 0.183702] omap_gpio 481ac000.gpio: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/gpio2_pins_default, deferring probe [ 0.183958] omap_gpio 481ae000.gpio: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/gpio3_pins_default, deferring probe [ 0.190726] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.228027] edma 49000000.edma: TI EDMA DMA engine driver [ 0.230431] usbcore: registered new interface driver usbfs [ 0.230525] usbcore: registered new interface driver hub [ 0.230689] usbcore: registered new device driver usb [ 0.231237] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 0.231293] omap_i2c 4802a000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c1_pins, deferring probe [ 0.231392] media: Linux media interface: v0.10 [ 0.231458] Linux video capture interface: v2.00 [ 0.231508] pps_core: LinuxPPS API ver. 1 registered [ 0.231516] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.231545] PTP clock support registered [ 0.231603] EDAC MC: Ver: 3.0.0 [ 0.232811] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.233986] clocksource: Switched to clocksource timer1 [ 0.245239] NET: Registered protocol family 2 [ 0.246130] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.246203] TCP bind hash table entries: 4096 (order: 4, 98304 bytes) [ 0.246334] TCP: Hash tables configured (established 4096 bind 4096) [ 0.246424] UDP hash table entries: 256 (order: 2, 16384 bytes) [ 0.246457] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes) [ 0.246666] NET: Registered protocol family 1 [ 0.247181] RPC: Registered named UNIX socket transport module. [ 0.247198] RPC: Registered udp transport module. [ 0.247206] RPC: Registered tcp transport module. [ 0.247213] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.248205] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 0.250204] futex hash table entries: 256 (order: 1, 8192 bytes) [ 0.258988] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.259841] NFS: Registering the id_resolver key type [ 0.259923] Key type id_resolver registered [ 0.259933] Key type id_legacy registered [ 0.260023] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.263893] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.263931] io scheduler noop registered [ 0.263945] io scheduler deadline registered [ 0.264465] io scheduler cfq registered (default) [ 0.265695] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.329797] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.333344] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 [ 0.985180] console [ttyS0] enabled [ 0.989751] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 31, base_baud = 3000000) is a 8250 [ 0.999393] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 32, base_baud = 3000000) is a 8250 [ 1.009308] [drm] Initialized drm 1.1.0 20060810 [ 1.021287] loop: module loaded [ 1.026056] libphy: Fixed MDIO Bus: probed [ 1.031621] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.038194] ehci-pci: EHCI PCI platform driver [ 1.042759] ehci-platform: EHCI generic platform driver [ 1.048174] ehci-omap: OMAP-EHCI Host Controller driver [ 1.053514] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.059756] ohci-pci: OHCI PCI platform driver [ 1.064299] ohci-platform: OHCI generic platform driver [ 1.070022] usbcore: registered new interface driver cdc_acm [ 1.075707] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.083806] usbcore: registered new interface driver cdc_wdm [ 1.089611] usbcore: registered new interface driver usbserial [ 1.097528] 47401300.usb-phy supply vcc not found, using dummy regulator [ 1.106668] musb-hdrc musb-hdrc.0.auto: Failed to request rx1. [ 1.112621] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 [ 1.121462] 47401b00.usb-phy supply vcc not found, using dummy regulator [ 1.130328] musb-hdrc musb-hdrc.1.auto: Failed to request rx1. [ 1.136264] musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517 [ 1.151271] mousedev: PS/2 mouse device common for all mice [ 1.157884] i2c /dev entries driver [ 1.166049] NET: Registered protocol family 17 [ 1.170636] 8021q: 802.1Q VLAN Support v1.8 [ 1.174957] Key type dns_resolver registered [ 1.179426] omap_voltage_late_init: Voltage driver support not added [ 1.189647] OMAP GPIO hardware version 0.1 [ 1.236583] tps65910-rtc tps65910-rtc: zdl1 rtc-tps65910. [ 1.242299] tps65910-rtc tps65910-rtc: zdl3 rtc-tps65910. [ 1.247959] tps65910-rtc tps65910-rtc: zdl2 rtc-tps65910. [ 1.253524] tps65910-rtc tps65910-rtc: zdl4 rtc-tps65910. [ 1.259194] tps65910-rtc tps65910-rtc: zdl5 rtc-tps65910. [ 1.271718] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0 [ 1.279386] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.286206] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 400 kHz [ 1.297499] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver [ 1.303329] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1 [ 1.311444] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.318269] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.325526] usb usb1: Product: MUSB HDRC host driver [ 1.330513] usb usb1: Manufacturer: Linux 4.4.19-rt25-gf572d285f0 musb-hcd [ 1.337417] usb usb1: SerialNumber: musb-hdrc.0.auto [ 1.343158] hub 1-0:1.0: USB hub found [ 1.346992] hub 1-0:1.0: 1 port detected [ 1.357394] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 1.363201] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 2 [ 1.371282] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.378107] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.385363] usb usb2: Product: MUSB HDRC host driver [ 1.390349] usb usb2: Manufacturer: Linux 4.4.19-rt25-gf572d285f0 musb-hcd [ 1.397255] usb usb2: SerialNumber: musb-hdrc.1.auto [ 1.402980] hub 2-0:1.0: USB hub found [ 1.406792] hub 2-0:1.0: 1 port detected [ 1.412553] vmmc: supplied by vbat [ 1.491162] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.497151] tps65910-rtc tps65910-rtc: setting system clock to 2016-10-03 21:20:36 UTC (1475529636) [ 1.515428] Waiting for root device PARTUUID=00030691-02... [ 1.516964] mmc0: new high speed SDHC card at address 0007 [ 1.524369] mmcblk0: mmc0:0007 SL16G 14.5 GiB [ 1.526134] mmcblk0: p1 p2 [ 1.567840] mmc1: MAN_BKOPS_EN bit is not set [ 1.575509] mmc1: new high speed MMC card at address 0001 [ 1.581769] mmcblk1: mmc1:0001 Q2J54A 3.59 GiB [ 1.586650] mmcblk1boot0: mmc1:0001 Q2J54A partition 1 16.0 MiB [ 1.592855] mmcblk1boot1: mmc1:0001 Q2J54A partition 2 16.0 MiB [ 2.020710] musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (80, . [ 3.642978] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 3.647994] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 3.648441] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 3.728982] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 3.748381] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 25 bits of entropy available) [ 3.810446] random: systemd: uninitialized urandom read (16 bytes read, 27 bits of entropy available) [ 3.820549] random: systemd: uninitialized urandom read (16 bytes read, 27 bits of entropy available) [ 3.831364] random: systemd: uninitialized urandom read (16 bytes read, 27 bits of entropy available) [ 4.185559] systemd[1]: [/lib/systemd/system/gadget-init.service:15] Unknown lvalue 'ExecStopPre' in section 'Service' [ 4.475818] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 4.483659] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 4.491395] systemd[1]: sysinit.target: Found dependency on basic.target/start [ 4.498680] systemd[1]: sysinit.target: Found dependency on sockets.target/start [ 4.506129] systemd[1]: sysinit.target: Found dependency on avahi-daemon.socket/start [ 4.514027] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 4.521470] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ 4.530923] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 4.575540] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.606268] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.634622] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.655867] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.674566] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 4.694875] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.714907] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 4.744752] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.765246] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 4.819107] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.854572] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 4.874524] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 4.894909] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.926123] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.955070] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.979873] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 5.030091] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 5.084937] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.119773] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.207845] systemd[1]: Mounting Temporary Directory... [ 5.214660] cryptodev: driver 1.8 loaded. Mounting Temporary Directory... [ 5.269721] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 5.313584] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 5.344986] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 5.380094] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.419616] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 5.471514] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 5.533883] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 5.574996] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 5.615012] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 5.655712] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Setup Virtual Console. [ OK ] Started Load Kernel Modules. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... Starting Flush Journal to Persistent Storage... [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ 7.274986] systemd-journald[143]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... Starting udev Kernel Device Manager... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started udev Coldplug all Devices. [ 8.731357] vdd_mpu: supplied by vbat [ 8.944321] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ OK ] Found device /dev/ttyS0. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Load/Save Random Seed. [ 9.597447] zdl set spi in master mode [ 9.601256] zdl in of_spi_register_master -2 1 [ 9.724535] zdl spi device max speed Hz 1000000,speed_hz 24000000, clkd 2, clkg 0 exclk 2 div 48 [ 9.733413] zdl setup: speed 24000000, sample leading edge, clk normal [ OK ] Started Create Volatile Files and Directories. [ 9.898358] at25 spi1.0: 2 KByte at25 eeprom, pagesize 256 [ 10.073222] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 10.565412] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 10.837412] remoteproc0: wkup_m3 is available [ 10.841907] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 10.913618] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 11.189943] remoteproc0: powering up wkup_m3 [ 11.234994] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217152 [ 11.260663] remoteproc0: remote processor wkup_m3 is now up [ 11.260712] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x191 [ 11.567907] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ OK ] Found device /dev/ttyS3. [ 11.884557] ti-pruss 4a300000.pruss: creating PRU cores and other child platform devices [ 11.893918] irq: no irq domain found for /ocp/pruss@4a300000/intc@4a320000 ! Starting Network Time Synchronization... [ 12.099504] irq: no irq domain found for /ocp/pruss@4a300000/intc@4a320000 ! Starting Update UTMP about System Boot/Shutdown... [ 12.274261] davinci_mdio 4a332400.mdio: davinci mdio revision 1.6 [ 12.280422] libphy: 4a332400.mdio: probed [ 12.534694] davinci_mdio 4a332400.mdio: phy[1]: device 4a332400.mdio:01, driver NatSemi DP83640 [ 12.543464] davinci_mdio 4a332400.mdio: phy[3]: device 4a332400.mdio:03, driver NatSemi DP83640 [ OK ] Started Network Time Synchronization. [ 12.784872] remoteproc1: 4a334000.pru0 is available [ 12.789895] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 12.908976] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 13.035044] pru-rproc 4a334000.pru0: PRU rproc node /ocp/pruss@4a300000/pru0@4a334000 probed successfully [ 13.133591] remoteproc2: 4a338000.pru1 is available [ 13.168817] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 13.263684] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 13.387316] pru-rproc 4a338000.pru1: PRU rproc node /ocp/pruss@4a300000/pru1@4a338000 probed successfully [ 13.498279] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 13.512033] zdl in phy_attach_direct [ 13.512040] zdl in phy_attach_direct2 [ 13.587762] dp83640: master PTP_STS 0x0100 [ 13.587873] dp83640: master PTP_ESTS 0x00fd [ 13.588523] dp83640: slave PTP_STS 0x0000 [ 13.588653] dp83640: slave PTP_ESTS 0x0000 [ 13.589177] dp83640: slave offset 909960 nanoseconds [ 13.590864] zdl in phy_attach_direct3 [ 13.591146] zdl in phy_attach_direct [ 13.591149] zdl in phy_attach_direct2 [ 13.667707] dp83640: master PTP_STS 0x0100 [ 13.667823] dp83640: master PTP_ESTS 0x007d [ 13.668474] dp83640: slave PTP_STS 0x0000 [ 13.668602] dp83640: slave PTP_ESTS 0x0000 [ 13.669125] dp83640: slave offset 80858120 nanoseconds [ 13.670813] zdl in phy_attach_direct3 [ 13.670846] prueth pruss_eth: prueth_netdev_init ret 0 [ 13.672629] prueth pruss_eth: TI PRU ethernet driver initialized [ OK ] Started Update UTMP about System Boot/Shutdown. Starting Synchronize System and HW clocks... [ OK ] Reached target System Time Synchronized. [ OK ] Started Synchronize System and HW clocks. [ OK ] Found device /dev/mmcblk0p1. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on dropbear.socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started Kernel Logging Service. Starting Print notice about GPLv3 packages... Starting Permit User Sessions... [ OK ] Started D-Bus System Message Bus. Starting Network Service... Starting Login Service... Starting Start USB gadget... [ OK ] Started System Logging Service. Starting uim-sysfs.service... Starting Telephony service... [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. Starting Avahi mDNS/DNS-SD Stack... [ 18.013022] remoteproc2: powering up 4a338000.pru1 [ OK ] Started Network Service.[ 18.048934] remoteproc2: Booting fw image ti-pruss/am335x-pru1-prueth-fw.elf, size 4830 [ OK ] Started Permit User Sessions. [ 18.188957] ti-pruss 4a300000.pruss: configured system_events = 0x0060000000a00000 intr_channels = 0x0000012a host_intr = 0x0000022a [ 18.328927] remoteproc2: remote processor 4a338000.pru1 is now up [ 18.392092] net eth1: started [ 18.497345] remoteproc1: powering up 4a334000.pru0 [ 18.502504] remoteproc1: Booting fw image ti-pruss/am335x-pru0-prueth-fw.elf, size 4754 [ 18.511721] using random self ethernet address [ 18.511732] using random host ethernet address [ 18.667085] Mass Storage Function, version: 2009/09/11 [ 18.667101] LUN: removable file: (no medium) [ 18.667383] LUN: removable read only file: /dev/mmcblk0p1 [ 18.667388] Number of LUNs=1 [ 18.891022] ti-pruss 4a300000.pruss: configured system_events = 0x0000060000500000 intr_channels = 0x00000095 host_intr = 0x00000115 [ 18.969839] remoteproc1: remote processor 4a334000.pru0 is now up [ 18.969891] net eth0: started [ 19.024997] random: nonblocking pool is initialized [ 19.038431] usb0: HOST MAC e2:ff:58:f9:e5:e4 [ 19.038530] usb0: MAC aa:2d:96:66:1b:e5 [ 19.040273] NET: Registered protocol family 15 [ 19.050870] g_multi gadget: Multifunction Composite Gadget [ 19.050880] g_multi gadget: g_multi ready [ OK ] Found device /dev/ttyGS0. [ 19.664903] eth1: Link is Up - 100Mbps/Full - flow control rx/tx [ OK ] Started Start USB gadget. [ 20.161986] Initializing XFRM netlink socket [ OK ] Started Telephony service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Login Service. Mounting Configuration File System... [ OK ] Started Serial Getty on ttyS3. [ OK ] Started Serial Getty on ttyGS0. [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Reached target Network. Starting Network Name Resolution... Starting Lightning Fast Webserver With Light System Requirements... [ OK ] Mounted Configuration File System. [ OK ] Started Network Name Resolution. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started uim-sysfs.service. Starting rc.pvr.service... *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils bison-dev bison cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbserver gstreamer1.0-libav hidapi libcairo-perf-utils libgmp10 libidn11 libmpc3 libmpfr4 make nettle swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ OK ] Started rc.pvr.service. Starting weston.service... [ OK ] Started weston.service. Starting telnetd.service... [ OK ] Started telnetd.service. Starting busybox-udhcpd.service... Starting thttpd.service... [ OK ] Started busybox-udhcpd.service. [ OK ] Started thttpd.service. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting thermal-zone-init.service... Starting parse-ip.service... [ OK ] Started thermal-zone-init.service. [ OK ] Started parse-ip.service. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am335x-evm ttyS0 Arago 2016.08 am335x-evm ttyS0 am335x-evm login: root root@am335x-evm:~# [ 38.664523] eth1: Link is Down root@am335x-evm:~# root@am335x-evm:~# root@am335x-evm:~# root@am335x-evm:~# root@am335x-evm:~# ifconfig eth0 Link encap:Ethernet HWaddr 80:30:DC:80:EE:56 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 80:30:DC:80:EE:58 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1 errors:0 dropped:0 overruns:0 frame:0 TX packets:5 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:216 (216.0 B) TX bytes:1670 (1.6 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:160 errors:0 dropped:0 overruns:0 frame:0 TX packets:160 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:12160 (11.8 KiB) TX bytes:12160 (11.8 KiB) usb0 Link encap:Ethernet HWaddr AA:2D:96:66:1B:E5 inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@am335x-evm:~# ifconfig eth1 192.168.1.204 root@am335x-evm:~# root@am335x-evm:~# root@am335x-evm:~# mpstat -I SCPU Linux 4.4.19-rt25-gf572d285f0 (am335x-evm) 10/03/16 _armv7l_ (1 CPU) 21:21:56 CPU HI/s TIMER/s NET_TX/s NET_RX/s BLOCK/s BLOCK_IOPOLL/s TASKLET/s SCHED/s HRTIMER/s RCU/s 21:21:56 0 0.02 100.72 0.06 1.23 0.00 0.00 50.37 0.00 8.68 0.00 root@am335x-evm:~# mpstat -I SCPU & [1] 1011 Linux 4.4.19-rt25-gf572d285f0 (am335x-evm) 10/03/16 _armv7l_ (1 CPU) 21:22:25 CPU HI/s TIMER/s NET_TX/s NET_RX/s BLOCK/s BLOCK_IOPOLL/s TASKLET/s SCHED/s HRTIMER/s RCU/s 21:22:25 0 0.02 100.59 0.05 0.90 0.00 0.00 37.02 0.00 6.76 0.00 root@am335x-evm:~# [1]+ Done mpstat -I SCPU root@am335x-evm:~# root@am335x-evm:~# root@am335x-evm:~# ps PID TTY TIME CMD 745 ttyS0 00:00:00 login 944 ttyS0 00:00:00 sh 1016 ttyS0 00:00:00 ps root@am335x-evm:~# root@am335x-evm:~# mpstat -I SCPU & [1] 1017 Linux 4.4.19-rt25-gf572d285f0 (am335x-evm) 10/03/16 _armv7l_ (1 CPU) 21:22:41 CPU HI/s TIMER/s NET_TX/s NET_RX/s BLOCK/s BLOCK_IOPOLL/s TASKLET/s SCHED/s HRTIMER/s RCU/s 21:22:41 0 0.02 100.57 0.04 0.79 0.00 0.00 32.73 0.00 5.98 0.00 root@am335x-evm:~# mpstat -I SCPU Linux 4.4.19-rt25-gf572d285f0 (am335x-evm) 10/03/16 _armv7l_ (1 CPU) 21:22:46 CPU HI/s TIMER/s NET_TX/s NET_RX/s BLOCK/s BLOCK_IOPOLL/s TASKLET/s SCHED/s HRTIMER/s RCU/s 21:22:46 0 0.02 100.55 0.04 0.76 0.00 0.00 31.57 0.00 5.79 0.00 [1]+ Done mpstat -I SCPU root@am335x-evm:~# [ 142.664656] eth1: Link is Up - 100Mbps/Full - flow control rx/tx root@am335x-evm:~# root@am335x-evm:~# mpstat -I SCPU Linux 4.4.19-rt25-gf572d285f0 (am335x-evm) 10/03/16 _armv7l_ (1 CPU) 21:23:08 CPU HI/s TIMER/s NET_TX/s NET_RX/s BLOCK/s BLOCK_IOPOLL/s TASKLET/s SCHED/s HRTIMER/s RCU/s 21:23:08 0 0.01 100.51 23963.97 0.69 0.00 0.00 27.07 0.00 5.08 0.00 root@am335x-evm:~# root@am335x-evm:~# mpstat -I SCPU [ 159.953984] sched: RT throttling activated [ 159.956015] NOHZ: local_softirq_pending 106 [ 159.964032] NOHZ: local_softirq_pending 106 [ 159.973990] NOHZ: local_softirq_pending 106 [ 159.983987] NOHZ: local_softirq_pending 106 [ 159.993987] NOHZ: local_softirq_pending 106 Linux 4.4.19-rt25-gf572d285f0 (am335x-evm) 10/03/16 _armv7l_ (1 CPU) 21:23:24 CPU HI/s TIMER/s NET_TX/s NET_RX/s BLOCK/s BLOCK_IOPOLL/s TASKLET/s SCHED/s HRTIMER/s RCU/s 21:23:24 0 0.01 100.16 70732.11 0.62 0.00 0.00 24.42 0.00 4.58 0.00 root@am335x-evm:~# [ 163.970646] NOHZ: local_softirq_pending 106 [ 163.974046] NOHZ: local_softirq_pending 106 [ 163.983991] NOHZ: local_softirq_pending 106 [ 163.993988] NOHZ: local_softirq_pending 106 [ 164.954056] NOHZ: local_softirq_pending 106 ▒