U-Boot SPL 2017.01-00458-g32d3fcd-dirty (Sep 30 2024 - 11:16:56) DRA722-GP ES2.0 Trying to boot from MMC1 reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2017.01-00458-g32d3fcd-dirty (Sep 30 2024 - 11:16:56 +0800) CPU : DRA722-GP ES2.0 Model: TI AM5718 IDK Board: AM571x IDK, For JRU REV DRAM: 1 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 SF: Detected s25fl256s_64k with page size 256 Bytes, erase size 64 KiB, total 32 MiB, mapped at 5c000000 Warning: fastboot.board_rev: unknown board revision Card did not respond to voltage select! ERROR: invalid mmc device at ../arch/arm/mach-omap2/utils.c:95/omap_mmc_get_part_size() SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Could not get PHY for ethernet@48484000: addr 0 Warning: ethernet@48484000 MAC addresses don't match: Address in SROM is 88:01:f9:d3:a0:bc Address in environment is c0:27:b9:14:00:10 eth0: ethernet@48484000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt ** Unable to read file uEnv.txt ** switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3762752 bytes read in 170 ms (21.1 MiB/s) 102819 bytes read in 13 ms (7.5 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe3000, end 8ffff1a2 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.69-g9ce43c71ae (cys@cys) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #15 SMP PREEMPT Fri Sep 27 12:25:12 CST 2024 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: TI AM5718 IDK [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [ 0.000000] DRA722 ES2.0 [ 0.000000] percpu: Embedded 13 pages/cpu @ef646000 s22028 r8192 d23028 u53248 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 210496 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=PARTUUID=d1c2b0af-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 644572K/848896K available (8192K kernel code, 317K rwdata, 2440K rodata, 2048K init, 304K bss, 24100K reserved, 180224K cma-reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB) [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB) [ 0.000000] .data : 0xc1000000 - 0xc104f608 ( 318 kB) [ 0.000000] .bss : 0xc1051000 - 0xc109d1b0 ( 305 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000016] Switching to timer-based delay loop, resolution 162ns [ 0.000324] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000332] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000747] Console: colour dummy device 80x30 [ 0.000763] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.000770] This ensures that you still see kernel messages. Please [ 0.000776] update your kernel commandline. [ 0.000792] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000805] pid_max: default: 32768 minimum: 301 [ 0.000907] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000917] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001537] CPU: Testing write buffer coherency: ok [ 0.001748] /cpus/cpu@0 missing clock-frequency property [ 0.001761] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001775] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.080042] EFI services will not be available. [ 0.099925] Brought up 1 CPUs [ 0.099935] SMP: Total of 1 processors activated (12.29 BogoMIPS). [ 0.099943] CPU: All CPU(s) started in HYP mode. [ 0.099949] CPU: Virtualization extensions available. [ 0.100329] devtmpfs: initialized [ 0.130079] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.130330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.130347] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.133707] pinctrl core: initialized pinctrl subsystem [ 0.134566] NET: Registered protocol family 16 [ 0.135447] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.136419] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.244195] omap_hwmod: dcan1: _wait_target_disable failed [ 0.370298] cpuidle: using governor ladder [ 0.400323] cpuidle: using governor menu [ 0.409919] OMAP GPIO hardware version 0.1 [ 0.425095] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.449351] No ATAGs? [ 0.449371] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.449381] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.449768] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.449778] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.450327] OMAP DMA hardware revision 0.0 [ 0.531048] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.532363] edma 43300000.edma: memcpy is disabled [ 0.537134] edma 43300000.edma: TI EDMA DMA engine driver [ 0.538223] vtt_fixed: supplied by V3_3D [ 0.541127] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.541307] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.541467] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.541622] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.544208] palmas 0-0058: Irq flag is 0x00000008 [ 0.572946] palmas 0-0058: Muxing GPIO 2b, PWM 0, LED 0 [ 0.575970] SMPS3: supplied by VMAIN [ 0.579218] SMPS6: supplied by VMAIN [ 0.580619] SMPS7: supplied by VMAIN [ 0.582054] SMPS8: supplied by VMAIN [ 0.583332] SMPS9: supplied by VMAIN [ 0.584024] LDO1: supplied by VMAIN5V5 [ 0.591460] LDO2: supplied by VMAIN5V5 [ 0.591715] random: fast init done [ 0.601321] LDO3: supplied by VMAIN [ 0.611344] LDO4: supplied by VMAIN [ 0.623480] LDO9: supplied by VMAIN [ 0.631428] LDOLN: supplied by VMAIN [ 0.641463] LDOUSB: supplied by VMAIN5V5 [ 0.653465] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.654073] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [ 0.654719] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz [ 0.654889] media: Linux media interface: v0.10 [ 0.654937] Linux video capture interface: v2.00 [ 0.654976] pps_core: LinuxPPS API ver. 1 registered [ 0.654984] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.655004] PTP clock support registered [ 0.655034] EDAC MC: Ver: 3.0.0 [ 0.661563] omap-mailbox 4883c000.mailbox: omap mailbox rev 0x400 [ 0.661854] omap-mailbox 4883e000.mailbox: omap mailbox rev 0x400 [ 0.662143] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.662336] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.662659] Advanced Linux Sound Architecture Driver Initialized. [ 0.670956] clocksource: Switched to clocksource arch_sys_counter [ 0.680626] NET: Registered protocol family 2 [ 0.681187] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.681251] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.681376] TCP: Hash tables configured (established 8192 bind 8192) [ 0.681428] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.681459] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.681587] NET: Registered protocol family 1 [ 0.701993] RPC: Registered named UNIX socket transport module. [ 0.702003] RPC: Registered udp transport module. [ 0.702010] RPC: Registered tcp transport module. [ 0.702017] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.702964] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.715671] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.723160] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.733906] NFS: Registering the id_resolver key type [ 0.733932] Key type id_resolver registered [ 0.733940] Key type id_legacy registered [ 0.733983] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.735386] bounce: pool size: 64 pages [ 0.735542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.735552] io scheduler noop registered [ 0.735560] io scheduler deadline registered [ 0.735690] io scheduler cfq registered (default) [ 0.740746] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.740815] pinctrl-single 4a002e8c.pinmux: please update dts to use #pinctrl-cells = <1> [ 0.740894] pinctrl-single 4a002e8c.pinmux: initialized with no interrupts [ 0.740905] pinctrl-single 4a002e8c.pinmux: 1 pins at pa fc002e8c size 4 [ 0.810152] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.813558] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 299, base_baud = 3000000) is a 8250 [ 0.814552] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 300, base_baud = 3000000) is a 8250 [ 1.715037] console [ttyS2] enabled [ 1.719408] 48422000.serial: ttyS7 at MMIO 0x48422000 (irq = 301, base_baud = 3000000) is a 8250 [ 1.729089] 48424000.serial: ttyS8 at MMIO 0x48424000 (irq = 302, base_baud = 3000000) is a 8250 [ 1.738764] 4ae2b000.serial: ttyS9 at MMIO 0x4ae2b000 (irq = 303, base_baud = 3000000) is a 8250 [ 1.749456] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 1.756251] [drm] Initialized [ 1.931832] brd: module loaded [ 2.020207] loop: module loaded [ 2.028356] m25p80 spi0.0: s25fl256s1 (32768 Kbytes) [ 2.033451] 7 ofpart partitions found on MTD device spi0.0 [ 2.038960] Creating 7 MTD partitions on "spi0.0": [ 2.043791] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 2.059949] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 2.076316] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 2.093383] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 2.110098] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 2.127528] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 2.143906] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 2.161341] libphy: Fixed MDIO Bus: probed [ 2.220994] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 2.227119] libphy: 48485000.mdio: probed [ 2.242609] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver TI DP83822 10/100 Mbps PHY [ 2.252361] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver TI DP83822 10/100 Mbps PHY [ 2.262729] cpsw 48484000.ethernet: Detected MACID = c0:27:b9:14:00:10 [ 2.269327] dma_params.desc_mem_size:8192,data->bd_ram_size:8192 [ 2.275457] pool->num_desc:256,pool->mem_size:8192,pool->desc_size:32 [ 2.282076] cpsw 48484000.ethernet: device node lookup for pps timer failed [ 2.289105] cpsw 48484000.ethernet: cpts: overflow check period 500 (jiffies) [ 2.297310] cpsw 48484000.ethernet: cpsw: Detected MACID = c0:27:b9:14:00:11 [ 2.305873] mousedev: PS/2 mouse device common for all mice [ 2.311814] i2c /dev entries driver [ 2.322755] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.391262] omap_hsmmc 480b4000.mmc: Cannot get pinctrl [ 2.397253] ledtrig-cpu: registered to indicate activity on CPUs [ 2.411385] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 2.416545] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 2.431238] gpmc_cs_remap-$$$$$$$$$$$$$$$$$&&&&&&&&&&&&&&************-___________-------the cs is:0 and the base is:33554432 [ 2.461286] gpmc_cs_remap-$$$$$$$$$$$$$$$$$&&&&&&&&&&&&&&************-___________-------the cs is:3 and the base is:134217728 [ 2.481187] fram modules is installed [ 2.484862] register myfram driver ok! [ 2.502020] NET: Registered protocol family 10 [ 2.517137] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.531339] NET: Registered protocol family 17 [ 2.535946] Key type dns_resolver registered [ 2.540321] omap_voltage_late_init: Voltage driver support not added [ 2.561033] Power Management for TI OMAP4+ devices. [ 2.566108] Registering SWP/SWPB emulation handler [ 2.591501] my_irq request irq success: 212 [ 2.595750] my_irq request irq success: 217 [ 2.600021] gpio(5_6)->output,value :0! [ 2.604350] dmm 4e000000.dmm: workaround for errata i878 in use [ 2.614457] dmm 4e000000.dmm: initialized all PAT entries [ 2.620448] hctosys: unable to open rtc device (rtc0) [ 2.626083] fixed-supply: disabling [ 2.629748] ldousb: disabling [ 2.632990] ALSA device list: [ 2.635966] No soundcards found. [ 2.639959] Waiting for root device PARTUUID=d1c2b0af-02... [ 2.739706] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.754331] mmc0: new ultra high speed SDR104 SDHC card at address aaaa [ 2.771362] mmcblk0: mmc0:aaaa SD32G 29.7 GiB [ 2.776763] mmcblk0: p1 p2 [ 3.008437] EXT4-fs (mmcblk0p2): recovery complete [ 3.014054] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.022222] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 3.028817] devtmpfs: mounted [ 3.032913] Freeing unused kernel memory: 2048K [ 3.114996] systemd[1]: System time before build time, advancing clock. [ 3.131371] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 3.149875] systemd[1]: Detected architecture arm. Welcome to Arago 2017.12! [ 3.181583] systemd[1]: Set hostname to . [ 3.316331] systemd[1]: Configuration file /lib/systemd/system/serial-getty@.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 3.332269] systemd[1]: Configuration file /lib/systemd/system/serial-getty@.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway. [ 3.409889] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 3.441181] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 3.481219] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 3.523100] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 3.551080] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Listening on Journal Socket. [ OK ] Listening on udev Control Socket. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Created slice System Slice. [ OK ] Created slice system-serial\x2dgetty.slice. Starting Remount Root and Kernel File Systems... [ 3.846048] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Starting Load Kernel Modules... [ 3.878725] cryptodev: loading out-of-tree module taints kernel. [ OK ] Created slice system-getty.slice. [ 3.896984] cryptodev: driver 1.8 loaded. [ OK ] Reached target Slices. Mounting POSIX Message Queue File System... Starting Setup Virtual Console... Starting Create Static Device Nodes in /dev... Mounting Debug File System... [ OK ] Reached target Swap. Mounting Temporary Directory... [ OK ] Listening on Process Core Dump Socket. [ OK ] Listening on Syslog Socket. Starting Journal Service... [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Temporary Directory. [ OK ] Started Journal Service. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Load Kernel Modules. [ OK ] Started Setup Virtual Console. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... Starting Apply Kernel Variables... Mounting Configuration File System... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... Starting udev Coldplug all Devices... Starting Flush Journal to Persistent Storage... [ OK ] Mounted Configuration File System. [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Apply Kernel Variables. [ 4.861097] systemd-journald[118]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting tiipclad-daemon.service... [ OK ] Started Kernel Logging Service. [ OK ] Started D-Bus System Message Bus. [ 5.891300] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 5.943419] adxl34x 3-0053: no IRQ? [ 5.968451] omap-des 480a5000.des: will run requests pump with realtime priority [ 6.030403] CAN device driver interface [ OK ] Started Job spooling tools. [ 6.131254] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=357) [ OK ] Started Periodic Command Scheduler. Starting telnetd.service... [ OK ] Started System Logging Service. Starting Print notice about GPLv3 packages... [ 6.234116] c_can_platform 48480000.can: c_can_platform device registered (regs=fa480000, irq=358) Starting Network Service... [ 6.358520] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 6.391998] vpe 489d0000.vpe: Device registered as /dev/video0 Starting Login Service... [ 6.488853] net eth1: initializing cpsw version 1.15 (0) [[ 6.539546] cpsw 48484000.ethernet: initialized cpsw ale version 1.4 OK ] Started Network Service. [ OK ] Started tiipclad-daemon.service. [ OK ] Started telnetd.service. [ OK ] Found device /dev/ttyS2. [ 6.604615] cpsw 48484000.ethernet: ALE Table size 1024 [ 6.722964] SCSI subsystem initialized [ OK ] Started Login Service. Starting thttpd.service... [ OK ] Reached target Network. Starting Permit User Sessions... Starting Network Name Resolution... [ 6.842465] TI DP83822 10/100 Mbps PHY 48485000.mdio:02: attached PHY driver [TI DP83822 10/100 Mbps PHY] (mii_bus:phy_addr=48485000.mdio:02, irq=169) [ 6.882147] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 6.894947] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 6.894965] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 6.894971] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 6.944795] scsi host0: ahci [ 6.945057] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 349 [ 6.959936] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 7.043000] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 7.052695] omap-aes 4b500000.aes: will run requests pump with realtime priority [ 7.105409] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 7.110089] omap-aes 4b700000.aes: will run requests pump with realtime priority [ 7.112518] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7.272573] ata1: SATA link down (SStatus 0 SControl 300) [ 7.445159] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 7.445236] remoteproc remoteproc0: 58820000.ipu is available [ 7.445329] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2 [ 7.445334] remoteproc remoteproc0: powering up 58820000.ipu *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: binutils cifs-utils cpio dosfstools gawk gzip libreadline6 m4 which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using [ 7.445354] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2 opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ 7.445358] remoteproc remoteproc0: request_firmware failed: -2 [ 7.445499] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ 7.445566] remoteproc remoteproc1: 55020000.ipu is available [ 7.445634] remoteproc remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2 [ 7.445639] remoteproc remoteproc1: powering up 55020000.ipu [ 7.445657] remoteproc remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2 [ 7.445661] remoteproc remoteproc1: request_firmware failed: -2 [ 7.657125] ti-pruss 4b200000.pruss: creating PRU cores and other child platform devices [ 7.710990] davinci_mdio 4b232400.mdio: davinci mdio revision 1.6 [ 7.710994] libphy: 4b232400.mdio: probed [ 7.771534] davinci_mdio 4b232400.mdio: phy[3]: device 4b232400.mdio:03, driver TI DP83822 10/100 Mbps PHY [ 7.771539] davinci_mdio 4b232400.mdio: phy[4]: device 4b232400.mdio:04, driver TI DP83822 10/100 Mbps PHY [ 7.771666] ti-pruss 4b280000.pruss: creating PRU cores and other child platform devices [ 7.831002] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6 [ 7.831006] libphy: 4b2b2400.mdio: probed [ 7.834059] remoteproc remoteproc2: 4b234000.pru0 is available [ 7.834101] pru-rproc 4b234000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b234000 probed successfully [ 7.834430] remoteproc remoteproc3: 4b238000.pru1 is available [ 7.834462] pru-rproc 4b238000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b238000 probed successfully [ 7.834650] remoteproc remoteproc4: 4b2b4000.pru0 is available [ 7.834679] pru-rproc 4b2b4000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/pru@4b2b4000 probed successfully [ 7.834851] remoteproc remoteproc5: 4b2b8000.pru1 is available [ 7.834880] pru-rproc 4b2b8000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/pru@4b2b8000 probed successfully [ 7.844214] prueth pruss2_eth: pruss MC Mask 0:0:0:0:0:0 [ 7.844437] prueth pruss2_eth: port 1: using random MAC addr: fe:82:49:a4:76:86 [ 7.844629] prueth pruss1_eth: pruss MC Mask 0:0:0:0:0:0 [ 8.043082] prueth pruss1_eth: request for sync latch pins failed: -19 [ 9.027884] prueth pruss2_eth: pruss MC Mask 0:0:0:0:0:0 [ 9.028005] prueth pruss2_eth: port 1: using random MAC addr: 1e:78:ae:92:8e:5b [ 9.028856] prueth pruss2_eth: pruss MC Mask 0:0:0:0:0:0 [ 9.028961] prueth pruss2_eth: port 1: using random MAC addr: 6a:9a:8d:ad:98:88 [ 9.228698] usbcore: registered new interface driver usbfs [ 9.229221] usbcore: registered new interface driver hub [ 9.229770] usbcore: registered new device driver usb [ 9.270262] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 9.270281] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 9.271340] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x02010010 [ 9.271380] xhci-hcd xhci-hcd.0.auto: irq 436, io mem 0x48890000 [ 9.272449] hub 1-0:1.0: USB hub found [ 9.272473] hub 1-0:1.0: 1 port detected [ 9.273046] prueth pruss2_eth: pruss MC Mask 0:0:0:0:0:0 [ 9.273173] prueth pruss2_eth: port 1: using random MAC addr: 7e:c7:e9:aa:1e:1f [ 9.273609] prueth pruss2_eth: pruss MC Mask 0:0:0:0:0:0 [ 9.273710] prueth pruss2_eth: port 1: using random MAC addr: f2:07:a1:d7:5c:5f [ 9.273829] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 9.273841] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 9.273900] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 9.274899] hub 2-0:1.0: USB hub found [ 9.274922] hub 2-0:1.0: 1 port detected [ 9.275372] prueth pruss2_eth: pruss MC Mask 0:0:0:0:0:0 [ 9.275479] prueth pruss2_eth: port 1: using random MAC addr: de:ce:8a:30:37:65 [ 9.275742] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 9.275759] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 9.276104] prueth pruss2_eth: pruss MC Mask 0:0:0:0:0:0 [ 9.276206] prueth pruss2_eth: port 1: using random MAC addr: d6:1b:53:df:72:44 [ 9.276422] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x02010010 [ 9.276458] xhci-hcd xhci-hcd.1.auto: irq 437, io mem 0x488d0000 [ 9.282588] hub 3-0:1.0: USB hub found [ 9.282612] hub 3-0:1.0: 1 port detected [ 9.283078] prueth pruss2_eth: pruss MC Mask 0:0:0:0:0:0 [ 9.283186] prueth pruss2_eth: port 1: using random MAC addr: 1a:6d:f2:fb:8d:e0 [ 9.283365] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 9.283376] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 9.283684] prueth pruss2_eth: pruss MC Mask 0:0:0:0:0:0 [ 9.283783] prueth pruss2_eth: port 1: using random MAC addr: 42:8b:e4:73:01:e6 [ 9.283861] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 9.284814] hub 4-0:1.0: USB hub found [ 9.284837] hub 4-0:1.0: 1 port detected [ 9.285259] prueth pruss2_eth: pruss MC Mask 0:0:0:0:0:0 [ 9.285364] prueth pruss2_eth: port 1: using random MAC addr: 8a:3c:eb:fb:10:ab [ 9.286496] prueth pruss2_eth: pruss MC Mask 0:0:0:0:0:0 [ 9.286606] prueth pruss2_eth: port 1: using random MAC addr: 5e:59:6c:11:6b:dc [ OK ] Started Permit User Sessions. [ 9.557528] ------rgmii sel 8 [[ 9.583484] ------slave 1 OK ] Started Print notice about GPLv3 packages. [ 9.592890] cpts ptp bc clkid 0 [ 9.600669] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9.634984] prueth pruss1_eth: TI PRU ethernet (type 0) driver initialized [ 9.675180] net eth0: initializing cpsw version 1.15 (0) [ OK ] Started Network Name Resolution. [ 9.734819] prueth pruss2_eth: pruss MC Mask 0:0:0:0:0:0 [ 9.773048] TI DP83822 10/100 Mbps PHY 48485000.mdio:01: attached PHY driver [TI DP83822 10/100 Mbps PHY] (mii_bus:phy_addr=48485000.mdio:01, irq=168) [ 9.773134] ------rgmii sel 8 [ 9.773136] ------slave 0 [ 9.798521] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.863591] remoteproc remoteproc2: powering up 4b234000.pru0 [ 9.866138] remoteproc remoteproc2: Booting fw image ti-pruss/am57xx-pru0-prueth-fw.elf, size 5028 [ 9.866252] ti-pruss 4b200000.pruss: configured system_events = 0x0000060000500000 intr_channels = 0x00000095 host_intr = 0x00000115 [ 9.866258] remoteproc remoteproc2: remote processor 4b234000.pru0 is now up [ 9.866276] net eth2: started [ 9.866742] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 9.887199] remoteproc remoteproc3: powering up 4b238000.pru1 [ 9.893813] remoteproc remoteproc3: Booting fw image ti-pruss/am57xx-pru1-prueth-fw.elf, size 5060 [ 9.893929] ti-pruss 4b200000.pruss: configured system_events = 0x0060000000a00000 intr_channels = 0x0000012a host_intr = 0x0000022a [ 9.893933] remoteproc remoteproc3: remote processor 4b238000.pru1 is now up [ 9.893953] net eth3: started [ 9.894169] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ OK ] Started thttpd.service. [ 9.995882] prueth pruss2_eth: port 1: using random MAC addr: e6:8d:66:23:e4:99 [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting rng-tools.service... [ 10.456104] random: crng init done [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... [ OK ] Started rng-tools.service. [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. [ OK ] Reached target Multi-User System. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am57xx-evm ttyS2 Arago 2017.12 am57xx-evm ttyS2 am57xx-evm login: root (automatic login) Thu Jan 1 01:00:00 UTC 1970 Current version is V1.0.11.0! [ 11.395265] This the ds60_dpram driver. Start to write board online flag! Start to write 0x44 flag! start to wait 0xCC and read unit/task param! [ 11.741704] cpsw 48484000.ethernet eth1: Link is Up - 100Mbps/Full - flow control rx/tx [ 11.750172] cpsw 48484000.ethernet eth1: Link is Up - 100Mbps/Full - flow control rx/tx [ 11.760185] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 12.552883] cpsw 48484000.ethernet eth1: Link is Down [ 12.558446] cpsw 48484000.ethernet eth1: Link is Down [ 13.101555] prueth pruss1_eth eth2: Link is Up - 100Mbps/Full - flow control rx/tx [ 13.109684] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 13.150367] prueth pruss1_eth eth3: Link is Up - 100Mbps/Full - flow control rx/tx [ 13.159842] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready [ 13.201063] NOHZ: local_softirq_pending 08 [ 13.351057] NOHZ: local_softirq_pending 08 [ 13.421041] NOHZ: local_softirq_pending 08 [ 14.081060] NOHZ: local_softirq_pending 08 [ 14.161068] NOHZ: local_softirq_pending 08 [ 14.408801] NOHZ: local_softirq_pending 08 [ 14.465664] NOHZ: local_softirq_pending 08 [ 14.741043] NOHZ: local_softirq_pending 08 [ 15.361866] NOHZ: local_softirq_pending 08 [ 15.366551] NOHZ: local_softirq_pending 08 root@am57xx-evm:~# ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: Unknown! Duplex: Unknown! (255) Port: MII PHYAD: 1 Transceiver: external Auto-negotiation: on Supports Wake-on: d Wake-on: d Current message level: 0x00000000 (0) Link detected: no root@am57xx-evm:~# ethtool eth1 Settings for eth1: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10Mb/s Duplex: Half Port: MII PHYAD: 2 Transceiver: external Auto-negotiation: on Supports Wake-on: d Wake-on: d Current message level: 0x00000000 (0) Link detected: no root@am57xx-evm:~# ethtool eth2 Settings for eth2: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: Symmetric Receive-only Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 3 Transceiver: external Auto-negotiation: on Link detected: yes root@am57xx-evm:~# ethtool eth3 Settings for eth3: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: Symmetric Receive-only Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 4 Transceiver: external Auto-negotiation: on Link detected: yes root@am57xx-evm:~#