Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.40-rt29-gd5443cbd3b (bridge@PC932) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #22 SMP PREEMPT RT Thu Nov 8 15:13:45 CET 2018 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: TI DRA718 EVM [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x0000000094000000 [ 0.000000] OMAP4: Map 0x000000009fd00000 to fe600000 for dram barrier [ 0.000000] DRA722 ES2.1 [ 0.000000] percpu: Embedded 15 pages/cpu @d3ad7000 s31968 r8192 d21280 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 125860 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/nfs nfsroot=10.3.33.185:/home/bridge/SDK-Bridge/ti-processor-sdk-linux-rt-am57xx-evm-05.00.00.15/targetNFS,nolock rw ip=10.3.33.189:10.3 .33.185::255.255.248.0:off [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 306544K/507904K available (8192K kernel code, 357K rwdata, 2484K rodata, 2048K init, 347K bss, 21136K reserved, 180224K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xdf800000 - 0xff800000 ( 512 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB) [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB) [ 0.000000] .data : 0xc1000000 - 0xc1059760 ( 358 kB) [ 0.000000] .bss : 0xc105b000 - 0xc10b1d84 ( 348 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] arch_timer: cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000010] Switching to timer-based delay loop, resolution 162ns [ 0.000336] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000338] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000844] Console: colour dummy device 80x30 [ 0.000960] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.000962] This ensures that you still see kernel messages. Please [ 0.000963] update your kernel commandline. [ 0.000977] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000984] pid_max: default: 32768 minimum: 301 [ 0.001107] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001113] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001727] CPU: Testing write buffer coherency: ok [ 0.001966] /cpus/cpu@0 missing clock-frequency property [ 0.001998] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.039877] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.079869] Hierarchical SRCU implementation. [ 0.140344] EFI services will not be available. [ 0.160001] smp: Bringing up secondary CPUs ... [ 0.160011] smp: Brought up 1 node, 1 CPU [ 0.160020] SMP: Total of 1 processors activated (12.29 BogoMIPS). [ 0.160028] CPU: All CPU(s) started in HYP mode. [ 0.160034] CPU: Virtualization extensions available. [ 0.160585] devtmpfs: initialized [ 0.196110] random: get_random_u32 called from bucket_table_alloc+0x14c/0x288 with crng_init=0 [ 0.200201] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.200446] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.200466] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.204376] pinctrl core: initialized pinctrl subsystem [ 0.205223] DMI not present or invalid. [ 0.205675] NET: Registered protocol family 16 [ 0.208172] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.209060] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.250572] omap_hwmod: kbd: no dt node [ 0.250583] ------------[ cut here ]------------ [ 0.250604] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2494 _init.constprop.21+0x1e4/0x4a8 [ 0.250612] omap_hwmod: kbd: doesn't have mpu register target base [ 0.250619] Modules linked in: [ 0.250635] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.40-rt29-gd5443cbd3b #22 [ 0.250638] Hardware name: Generic DRA72X (Flattened Device Tree) [ 0.250640] Backtrace: [ 0.250655] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 0.250661] r7:00000009 r6:60000013 r5:00000000 r4:c1057a3c [ 0.250669] [] (show_stack) from [] (dump_stack+0x90/0xa4) [ 0.250678] [] (dump_stack) from [] (__warn+0xec/0x104) [ 0.250683] r7:00000009 r6:c0b98c74 r5:00000000 r4:d3469e20 [ 0.250692] [] (__warn) from [] (warn_slowpath_fmt+0x40/0x48) [ 0.250698] r9:000000d0 r8:c0e49824 r7:00000000 r6:c10133b4 r5:00000000 r4:c0b98f80 [ 0.250707] [] (warn_slowpath_fmt) from [] (_init.constprop.21+0x1e4/0x4a8) [ 0.250710] r3:c0bff620 r2:c0b98f80 [ 0.250713] r4:c1013370 [ 0.250722] [] (_init.constprop.21) from [] (__omap_hwmod_setup_all+0x48/0x108) [ 0.250729] r10:c105b000 r9:000000d0 r8:c0e49824 r7:c105b000 r6:c0e0c594 r5:c100b648 [ 0.250731] r4:c1013370 [ 0.250739] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0x4c/0x170) [ 0.250742] r5:00000000 r4:ffffe000 [ 0.250749] [] (do_one_initcall) from [] (kernel_init_freeable+0x228/0x2c4) [ 0.250754] r8:c0e49824 r7:c105b000 r6:00000003 r5:c0e5744c r4:c0c6b720 [ 0.250761] [] (kernel_init_freeable) from [] (kernel_init+0x10/0x110) [ 0.250766] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c092e498 [ 0.250769] r4:00000000 [ 0.250776] [] (kernel_init) from [] (ret_from_fork+0x14/0x34) [ 0.250779] r5:c092e498 r4:00000000 [ 0.250782] ---[ end trace 0000000000000001 ]--- [ 0.416942] OMAP GPIO hardware version 0.1 [ 0.449676] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.449688] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.450152] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.450164] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.451556] OMAP DMA hardware revision 0.0 [ 0.504424] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.506962] edma 43300000.edma: memcpy is disabled [ 0.513017] edma 43300000.edma: TI EDMA DMA engine driver [ 0.514113] evm_5v0: supplied by evm_12v0 [ 0.514605] evm_3v6: supplied by evm_5v0 [ 0.515084] vsys_3v3: supplied by evm_12v0 [ 0.515564] evm_3v3: supplied by vsys_3v3 [ 0.516043] aic_dvdd: supplied by evm_3v3 [ 0.517897] vddshv8: invalid voltage constraints [ 0.517912] gpio-regulator gpio-regulator-TPS74801: Failed to register regulator: -22 [ 0.518006] gpio-regulator: probe of gpio-regulator-TPS74801 failed with error -22 [ 0.521515] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.522021] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.522621] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.523205] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.523779] iommu: Adding device 58820000.ipu to group 1 [ 0.523971] iommu: Adding device 55020000.ipu to group 2 [ 0.524323] iommu: Adding device 40800000.dsp to group 0 [ 0.526339] media: Linux media interface: v0.10 [ 0.526390] Linux video capture interface: v2.00 [ 0.526517] pps_core: LinuxPPS API ver. 1 registered [ 0.526525] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.526553] PTP clock support registered [ 0.526590] EDAC MC: Ver: 3.0.0 [ 0.530788] dmi: Firmware registration failed. [ 0.531375] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.531670] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.532224] Advanced Linux Sound Architecture Driver Initialized. [ 0.540842] clocksource: Switched to clocksource arch_sys_counter [ 0.554332] NET: Registered protocol family 2 [ 0.555190] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.555242] TCP bind hash table entries: 4096 (order: 4, 114688 bytes) [ 0.555380] TCP: Hash tables configured (established 4096 bind 4096) [ 0.555477] UDP hash table entries: 256 (order: 2, 16384 bytes) [ 0.555510] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes) [ 0.555760] NET: Registered protocol family 1 [ 0.576296] RPC: Registered named UNIX socket transport module. [ 0.576308] RPC: Registered udp transport module. [ 0.576317] RPC: Registered tcp transport module. [ 0.576326] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.577689] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.577901] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.579718] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.587805] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.598708] NFS: Registering the id_resolver key type [ 0.598741] Key type id_resolver registered [ 0.598751] Key type id_legacy registered [ 0.598824] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.601377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.601392] io scheduler noop registered [ 0.601403] io scheduler deadline registered [ 0.601553] io scheduler cfq registered (default) [ 0.601564] io scheduler mq-deadline registered [ 0.601574] io scheduler kyber registered [ 0.607665] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.607921] pinctrl-single 4a002e8c.pinmux: please update dts to use #pinctrl-cells = <1> [ 0.608012] pinctrl-single 4a002e8c.pinmux: initialized with no interrupts [ 0.608024] pinctrl-single 4a002e8c.pinmux: 1 pins at pa fc002e8c size 4 [ 0.703780] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.708495] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 43, base_baud = 3000000) is a 8250 [ 0.710280] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 44, base_baud = 3000000) is a 8250 [ 1.805753] console [ttyS2] enabled [ 1.811070] 48068000.serial: ttyS5 at MMIO 0x48068000 (irq = 45, base_baud = 3000000) is a 8250 [ 1.822487] omap_rng 48090000.rng: Random Number Generator ver. 20 [ 1.847151] brd: module loaded [ 1.861866] loop: module loaded [ 1.870529] m25p80 spi0.0: found n25q256a, expected s25fl256s1 [ 1.876885] m25p80 spi0.0: n25q256a (32768 Kbytes) [ 1.881780] 10 ofpart partitions found on MTD device spi0.0 [ 1.887377] Creating 10 MTD partitions on "spi0.0": [ 1.892281] 0x000000000000-0x000000010000 : "QSPI.SPL" [ 1.898655] 0x000000010000-0x000000020000 : "QSPI.SPL.backup1" [ 1.905653] 0x000000020000-0x000000030000 : "QSPI.SPL.backup2" [ 1.912672] 0x000000030000-0x000000040000 : "QSPI.SPL.backup3" [ 1.919647] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.926205] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.933357] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.940251] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 1.947856] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 1.954420] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 1.962441] libphy: Fixed MDIO Bus: probed [ 2.030885] davinci_mdio 48485000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 2.038585] libphy: 48485000.mdio: probed [ 2.055229] davinci_mdio 48485000.mdio: phy[0]: device 48485000.mdio:00, driver TI DP83822 10/100 Mbps PHY [ 2.065685] cpsw 48484000.ethernet: Detected MACID = 00:a0:f4:de:ad:bd [ 2.072249] cpsw 48484000.ethernet: GMAC port 0 [ 2.076886] cpsw 48484000.ethernet: initialized cpsw ale version 1.4 [ 2.083273] cpsw 48484000.ethernet: ALE Table size 1024 [ 2.088536] cpsw 48484000.ethernet: device node lookup for pps timer failed [ 2.095571] cpsw 48484000.ethernet: cpts: overflow check period 500 (jiffies) [ 2.104512] net eth0: rpmsg goose driver init: 0 [ 2.109236] net eth0: ocmc rxbuf: pa x40300000 va e0900000 size 0xe000 [ 2.116737] omap4-keypad 4ae1c00000000400.keypad: no base address specified [ 2.123755] omap4-keypad: probe of 4ae1c00000000400.keypad failed with error -22 [ 2.131520] i2c /dev entries driver [ 2.136226] IR NEC protocol handler initialized [ 2.140779] IR RC5(x/sz) protocol handler initialized [ 2.146193] IR RC6 protocol handler initialized [ 2.150747] IR JVC protocol handler initialized [ 2.155299] IR Sony protocol handler initialized [ 2.159939] IR SANYO protocol handler initialized [ 2.164665] IR Sharp protocol handler initialized [ 2.169391] IR MCE Keyboard/mouse protocol handler initialized [ 2.175252] IR XMP protocol handler initialized [ 2.186379] sdhci: Secure Digital Host Controller Interface driver [ 2.192611] sdhci: Copyright(c) Pierre Ossman [ 2.197895] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.260885] mmc0: SDHCI controller on 480b4000.mmc [480b4000.mmc] using ADMA [ 2.280714] NET: Registered protocol family 10 [ 2.296753] Segment Routing with IPv6 [ 2.300527] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.307296] NET: Registered protocol family 17 [ 2.312286] Key type dns_resolver registered [ 2.316809] omap_voltage_late_init: Voltage driver support not added [ 2.321274] ti-iodelay 4844a000.padconf: Set reg 0x18c Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321286] ti-iodelay 4844a000.padconf: Set reg 0x1a4 Delay(a: 119 g: 0), Elements(C=0 F=3)0x29003 [ 2.321296] ti-iodelay 4844a000.padconf: Set reg 0x1b0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321306] ti-iodelay 4844a000.padconf: Set reg 0x1bc Delay(a: 18 g: 0), Elements(C=0 F=0)0x29000 [ 2.321315] ti-iodelay 4844a000.padconf: Set reg 0x1c8 Delay(a: 894 g: 0), Elements(C=1 F=9)0x29029 [ 2.321324] ti-iodelay 4844a000.padconf: Set reg 0x1d4 Delay(a: 30 g: 0), Elements(C=0 F=0)0x29000 [ 2.321333] ti-iodelay 4844a000.padconf: Set reg 0x1e0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321341] ti-iodelay 4844a000.padconf: Set reg 0x1ec Delay(a: 23 g: 0), Elements(C=0 F=0)0x29000 [ 2.321350] ti-iodelay 4844a000.padconf: Set reg 0x1f8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321359] ti-iodelay 4844a000.padconf: Set reg 0x360 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321368] ti-iodelay 4844a000.padconf: Set reg 0x194 Delay(a: 152 g: 0), Elements(C=0 F=4)0x29004 [ 2.321376] ti-iodelay 4844a000.padconf: Set reg 0x1ac Delay(a: 206 g: 0), Elements(C=0 F=5)0x29005 [ 2.321385] ti-iodelay 4844a000.padconf: Set reg 0x1b8 Delay(a: 78 g: 0), Elements(C=0 F=2)0x29002 [ 2.321394] ti-iodelay 4844a000.padconf: Set reg 0x1c4 Delay(a: 2 g: 0), Elements(C=0 F=0)0x29000 [ 2.321403] ti-iodelay 4844a000.padconf: Set reg 0x1d0 Delay(a: 266 g: 0), Elements(C=0 F=7)0x29007 [ 2.321412] ti-iodelay 4844a000.padconf: Set reg 0x1dc Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321420] ti-iodelay 4844a000.padconf: Set reg 0x1e8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321429] ti-iodelay 4844a000.padconf: Set reg 0x1f4 Delay(a: 43 g: 0), Elements(C=0 F=1)0x29001 [ 2.321460] ti-iodelay 4844a000.padconf: Set reg 0x200 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321470] ti-iodelay 4844a000.padconf: Set reg 0x368 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321479] ti-iodelay 4844a000.padconf: Set reg 0x190 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321488] ti-iodelay 4844a000.padconf: Set reg 0x1a8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321496] ti-iodelay 4844a000.padconf: Set reg 0x1b4 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321505] ti-iodelay 4844a000.padconf: Set reg 0x1c0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321514] ti-iodelay 4844a000.padconf: Set reg 0x1d8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321522] ti-iodelay 4844a000.padconf: Set reg 0x1e4 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321530] ti-iodelay 4844a000.padconf: Set reg 0x1f0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321539] ti-iodelay 4844a000.padconf: Set reg 0x1fc Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321548] ti-iodelay 4844a000.padconf: Set reg 0x364 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.321627] mmc0: new DDR MMC card at address 0001 [ 2.324434] mmcblk0: mmc0:0001 P1XXXX 7.20 GiB [ 2.326325] mmcblk0boot0: mmc0:0001 P1XXXX partition 1 16.0 MiB [ 2.328006] mmcblk0boot1: mmc0:0001 P1XXXX partition 2 16.0 MiB [ 2.329895] mmcblk0rpmb: mmc0:0001 P1XXXX partition 3 128 KiB [ 2.614154] Power Management for TI OMAP4+ devices. [ 2.619411] Registering SWP/SWPB emulation handler [ 2.667358] dmm 4e000000.dmm: workaround for errata i878 in use [ 2.676280] dmm 4e000000.dmm: initialized all PAT entries [ 2.685236] hctosys: unable to open rtc device (rtc0) [ 2.693166] net eth0: initializing cpsw version 1.15 (0) [ 2.804072] TI DP83822 10/100 Mbps PHY 48485000.mdio:00: attached PHY driver [TI DP83822 10/100 Mbps PHY] (mii_bus:phy_addr=48485000.mdio:00, irq=POLL) [ 2.820322] cpts ptp bc clkid 0 [ 2.828935] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.886511] cpsw 48484000.ethernet eth0: Link is Up - 100Mbps/Half - flow control off [ 4.900903] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4.930872] IP-Config: Complete: [ 4.934124] device=eth0, hwaddr=00:a0:f4:de:ad:bd, ipaddr=10.3.33.189, mask=255.255.248.0, gw=255.255.255.255 [ 4.944552] host=off, domain=, nis-domain=(none) [ 4.949630] bootserver=10.3.33.185, rootserver=10.3.33.185, rootpath= [ 4.958026] aic_dvdd: disabling [ 4.961189] vmmcwl_fixed: disabling [ 4.964715] ALSA device list: [ 4.967697] No soundcards found. [ 4.993406] VFS: Mounted root (nfs filesystem) on device 0:14. [ 4.999902] devtmpfs: mounted [ 5.006092] Freeing unused kernel memory: 2048K [ 5.445109] systemd[1]: System time before build time, advancing clock. [ 5.515668] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid) [ 5.537424] systemd[1]: Detected architecture arm. Welcome to Arago 2018.04! [ 5.572396] systemd[1]: Set hostname to . [ 6.593371] random: systemd: uninitialized urandom read (16 bytes read) [ 6.600565] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 6.641079] random: systemd: uninitialized urandom read (16 bytes read) [ 6.648449] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 6.691031] random: systemd: uninitialized urandom read (16 bytes read) [ 6.697724] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 6.735857] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 6.774822] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 6.819396] systemd[1]: Mounting Temporary Directory (/tmp)... Mounting Temporary Directory (/tmp)... [ 6.852011] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Created slice User and Session Slice. [ OK ] Listening on Network Service Netlink Socket. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Listening on udev Control Socket. [ OK ] Listening on udev Kernel Socket. Mounting Kernel Debug File System... [ OK ] Listening on Journal Socket. Starting Create list of required st…ce nodes for the current kernel... [ OK ] Listening on Process Core Dump Socket. Mounting POSIX Message Queue File System... Starting Remount Root and Kernel File Systems... [ OK ] Reached target Slices. [ OK ] Reached target Paths. Starting Load Kernel Modules... [ OK ] Reached target Remote File Systems. [ OK ] Listening on Syslog Socket. [ 7.534008] cmemk: loading out-of-tree module taints kernel. [ 7.540763] CMEMK module: reference Linux version 4.14.40 [ 7.551480] cmemk initialized Starting Journal Service... [ 7.582541] cryptodev: driver 1.9 loaded. [ 7.669133] usbcore: registered new interface driver usbfs [ OK ] Mounted Kernel Debug File System. [ 7.680610] usbcore: registered new interface driver hub [ 7.692043] usbcore: registered new device driver usb [ OK ] Mounted POSIX Message Queue File System. [ 7.710478] usbcore: registered new interface driver usbserial [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Remount Root and Kernel File Systems. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. Mounting Kernel Configuration File System... Starting Apply Kernel Variables... Starting udev Coldplug all Devices... Starting Create Static Device Nodes in /dev... [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Journal Service. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... Starting Flush Journal to Persistent Storage... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ 8.837307] systemd-journald[102]: Received request to flush runtime journal from PID 1 Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Load/Save Random Seed. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ 11.320728] omap-rproc 58820000.ipu: assigned reserved memory node ipu1-memory@9d000000 [ 11.376090] remoteproc remoteproc0: 58820000.ipu is available [ 11.425767] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2 [ 11.435255] omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000 [ 11.437894] remoteproc remoteproc1: 55020000.ipu is available [ 11.450604] omap-rproc 40800000.dsp: assigned reserved memory node dsp1-memory@99000000 [ 11.453591] remoteproc remoteproc2: 40800000.dsp is available [ 11.746946] remoteproc remoteproc0: powering up 58820000.ipu [ 11.789485] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2 [ 11.867331] remoteproc remoteproc0: request_firmware failed: -2 [ OK ] Found device /dev/ttyS2. [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Network Service... [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ 13.336574] remoteproc remoteproc2: powering up 40800000.dsp [ OK ] Listening on RPCbind Server Activation Socket[ 13.367661] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 1885944 . [ 13.405568] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 13.413033] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 13.420201] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 13.431521] remoteproc remoteproc2: Failed to find resource table [ 13.456004] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ 13.603963] CAN device driver interface [ 13.884536] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 13.935884] omap-des 480a5000.des: will run requests pump with realtime priority [ 14.046577] c_can_platform 48480000.can: c_can_platform device registered (regs=fa480000, irq=83) [ OK ] Listening on dropbear.socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Print notice about GPLv3 packages... [ 14.548810] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin Starting RPC Bind Service... [ 14.651257] vpe 489d0000.vpe: Device registered as /dev/video0 [ 14.717935] remoteproc remoteproc1: powering up 55020000.ipu Starting TI MultiCore Tools Daemon...[ 14.732691] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3743076 [ 14.772194] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 Starting Login Service... [ OK ] Started Job spooling tools. [ OK ] Started Kernel Logging Service. [ OK ] Started Periodic Command Scheduler. [ 15.561731] virtio_rpmsg_bus virtio0: rpmsg host is online [ 15.577607] remoteproc remoteproc1: registered virtio0 (type 7) [ 15.597331] remoteproc remoteproc1: remote processor 55020000.ipu is now up [ 15.620426] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65 [ 15.621282] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x66 [ 15.646902] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec Starting Avahi mDNS/DNS-SD Stack... [ 15.706961] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ OK ] Started Hardware RNG Entropy Gatherer Daemon. [ OK ] Reached target Containers. [ 15.852084] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 15.867214] omap-aes 4b500000.aes: will run requests pump with realtime priority [ 15.924395] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 15.939770] omap-aes 4b700000.aes: will run requests pump with realtime priority [ OK ] Started System Logging Service. [ OK ] Started D-Bus System Message Bus. [ 17.833158] omap_gpio 48057000.gpio: Could not set line 30 debounce to 20000 microseconds (-22) [ OK ] Started Avahi mDNS/DNS-SD Stack. Starting uim-sysfs.service... [ OK ] Started Network Service. [ OK ] Started RPC Bind Service. [FAILED] Failed to start TI MultiCore Tools Daemon. See 'systemctl status ti-mct-daemon.service' for details. [ 25.830012] rpmsg_rpc virtio0.rpmsg-rpc.-1.101: probing service dce-callback with src 1024 dst 101 [ 25.837916] dwc3 488d0000.usb: failed to initialize core [ 25.909803] rpmsg_rpc virtio0.rpmsg-rpc.-1.101: published functions = 4 [ 25.915366] rpmsg_rpc virtio0.rpmsg-rpc.-1.102: probing service rpmsg-dce with src 1025 dst 102 [ 25.976832] rpmsg_rpc virtio0.rpmsg-rpc.-1.102: published functions = 9 [ 26.042673] dwc3 488d0000.usb: failed to initialize core [ OK ] Started uim-sysfs.service. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf bash-dev bash binutils-dev binutils bison-dev bison cifs-utils cpio cpp-symlinks cpp dosfstools elfutils-dev elfutils findutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbc6x gdbserver gettext gstreamer1.0-libav gzip hidapi libasm1 libcairo-perf-utils libdw1 libelf1 libgdbm-compat4 libgdbm-dev libgdbm4 libgettextlib libgettextsrc libgmp10 libidn11 libmavconn libmpc3 libmpfr4 libreadline-dev libreadline7 libunistring2 m4-dev m4 make mavlink mavros-extras mavros-msgs mavros nettle parted python3-pycairo socketcan-interface swig-dev swig which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ OK ] Started Login Service. Starting rc.pvr.service... [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Reached target Network. [ OK ] Started Redis In-Memory Data Store. Starting Permit User Sessions... Starting Lightning Fast Webserver With Light System Requirements... Starting Simple Network Management Protocol (SNMP) Daemon.... Starting Enable and configure wl18xx bluetooth stack... Starting Wait for Network to be Configured... Starting Network Name Resolution... [ OK ] Started rc.pvr.service. [ OK ] Started Permit User Sessions. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Wait for Network to be Configured. [ OK ] Started Serial Getty on ttyS2. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... Starting weston.service... [ OK ] Started Network Name Resolution. [ OK ] Started Enable and configure wl18xx bluetooth stack. [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started NFS status monitor for NFSv2/3 locking.. [ OK ] Reached target Network is Online. [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. [ OK ] Started Simple Network Management Protocol (SNMP) Daemon.. [ OK ] Started weston.service. Starting telnetd.service... Starting tiipclad-daemon.service... [ OK ] Started telnetd.service. [ OK ] Started tiipclad-daemon.service. [ 35.854116] NET: Registered protocol family 15 Starting thttpd.service... [ OK ] Started thttpd.service. Starting rng-tools.service... [ 36.243221] Initializing XFRM netlink socket [ OK ] Started rng-tools.service. Starting LSB: Redis, a key-value store... [ OK ] Started LSB: Redis, a key-value store. Starting gdbserverproxy.service... [ OK ] Started gdbserverproxy.service. Starting matrix-gui-2.0.service... [ OK ] Started matrix-gui-2.0.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. [ OK ] Reached target Multi-User System. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am57xx-evm ttyS2 Arago 2018.04 am57xx-evm ttyS2 am57xx-evm login: root root@am57xx-evm:~# dmesg | grep keypad [ 2.116737] omap4-keypad 4ae1c00000000400.keypad: no base address specified [ 2.123755] omap4-keypad: probe of 4ae1c00000000400.keypad failed with error -22 root@am57xx-evm:~# CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7 | VT102 | Offline | ttyUSB0