U-Boot SPL 2014.07 (Jan 18 2017 - 10:41:48) DRA752-GP ES1.0 spl_mmc_load_image reading u-boot.img reading u-boot.img U-Boot 2014.07 (Jan 18 2017 - 10:41:48) CPU : DRA752-GP ES1.0 Board: DRA74x EVM REV E.0 I2C: ready DRAM: 1.5 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). SCSI: Net: cpsw Hit any key to stop autoboot: 1  0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading uEnv.txt 164 bytes read in 3 ms (52.7 KiB/s) Loaded environment from uEnv.txt Importing environment from mmc0 ... 5082768 bytes read in 320 ms (15.1 MiB/s) 107679 bytes read in 86 ms (1.2 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x4d8e90 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 reserving fdt memory region: addr=84000000 size=10000000 reserving fdt memory region: addr=a2000000 size=4000000 reserving fdt memory region: addr=a0000000 size=2000000 Loading Device Tree to 83fe2000, end 83fff49e ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.63-00013-g1dd6ecd-dirty (ganesh@FSETBLR1LX013) (gcc version 4.7.3 20130226 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.03-20130313 - Linaro GCC 2013.03) ) #1 SMP PREEMPT Wed Jan 18 11:04:39 IST 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 [ 0.000000] Reserved memory: created CMA memory pool at 0x94000000, size 80 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x99000000, size 64 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x9d000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x9f000000, size 16 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0xa8000000, size 64 MiB [ 0.000000] Reserved memory: initialized node cmem@A6000000, compatible id shared-dma-pool [ 0.000000] cma: CMA: reserved 24 MiB at ae000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DRA752 ES1.0 [ 0.000000] PERCPU: Embedded 8 pages/cpu @ed748000 s8640 r8192 d15936 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243984 [ 0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=PARTUUID=84aff326-02 rw rootwait ip=none mem=1024M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 380016K/982016K available (6743K kernel code, 692K rwdata, 2456K rodata, 376K init, 267K bss, 602000K reserved, 269312K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc09040d4 (9201 kB) [ 0.000000] .init : 0xc0905000 - 0xc09631c0 ( 377 kB) [ 0.000000] .data : 0xc0964000 - 0xc0a11120 ( 693 kB) [ 0.000000] .bss : 0xc0a1112c - 0xc0a53e54 ( 268 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000457] Architected cp15 timer(s) running at 6.14MHz (virt). [ 0.000462] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 2794592043008ns [ 0.000471] Switching to timer-based delay loop [ 0.001517] Console: colour dummy device 80x30 [ 0.001534] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.001541] This ensures that you still see kernel messages. Please [ 0.001547] update your kernel commandline. [ 0.001561] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.001574] pid_max: default: 32768 minimum: 301 [ 0.001685] Security Framework initialized [ 0.001738] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001749] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.026804] CPU: Testing write buffer coherency: ok [ 0.027055] /cpus/cpu@0 missing clock-frequency property [ 0.027092] /cpus/cpu@1 missing clock-frequency property [ 0.027104] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.027128] Setting up static identity map for 0x8069c0a8 - 0x8069c118 [ 0.080899] CPU1: Booted secondary processor [ 0.080927] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.081053] Brought up 2 CPUs [ 0.081069] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.081076] CPU: All CPU(s) started in SVC mode. [ 0.081501] devtmpfs: initialized [ 0.082123] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.083882] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.097828] omap_hwmod: tptc0 using broken dt data from edma-controller [ 0.098341] omap_hwmod: tptc1 using broken dt data from edma-controller [ 0.168679] omap_hwmod: vpe: no dt node [ 0.168688] ------------[ cut here ]------------ [ 0.168708] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2581 _init+0x41c/0x478() [ 0.168715] omap_hwmod: vpe: doesn't have mpu register target base [ 0.168721] Modules linked in: [ 0.168736] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.63-00013-g1dd6ecd-dirty #1 [ 0.168743] Backtrace: [ 0.168771] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 0.168779] r6:60000013 r5:ffffffff r4:00000000 r3:00000000 [ 0.168809] [] (show_stack) from [] (dump_stack+0x80/0xa0) [ 0.168825] [] (dump_stack) from [] (warn_slowpath_common+0x70/0x94) [ 0.168832] r7:00000a15 r6:c0912d0c r5:00000009 r4:ec90de48 [ 0.168859] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x38/0x40) [ 0.168866] r8:c09132e0 r7:00000003 r6:00000000 r5:00000000 r4:c09b0a00 [ 0.168896] [] (warn_slowpath_fmt) from [] (_init+0x41c/0x478) [ 0.168902] r3:c082b2a4 r2:c0823bf8 [ 0.168921] [] (_init) from [] (omap_hwmod_for_each+0x38/0x64) [ 0.168928] r10:c094a67c r8:c09132e0 r7:00000000 r6:c09128f0 r5:c0973820 r4:c09b0a00 [ 0.168958] [] (omap_hwmod_for_each) from [] (__omap_hwmod_setup_all+0x2c/0x48) [ 0.168965] r7:c090555c r6:c0a11140 r5:00000001 r4:c095fce8 [ 0.168990] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0xf4/0x154) [ 0.169004] [] (do_one_initcall) from [] (kernel_init_freeable+0x104/0x1d4) [ 0.169011] r10:c094a67c r9:c094a65c r8:000000e9 r7:c090555c r6:c0a11140 r5:00000001 [ 0.169034] r4:c095fce8 [ 0.169050] [] (kernel_init_freeable) from [] (kernel_init+0x10/0xf4) [ 0.169057] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c068c8b8 [ 0.169079] r4:00000000 [ 0.169093] [] (kernel_init) from [] (ret_from_fork+0x14/0x34) [ 0.169100] r4:00000000 r3:ec90c000 [ 0.169126] ---[ end trace 58f6e3a2679cbef9 ]--- [ 0.171076] omap_hwmod: wd_timer2: no dt node [ 0.171084] ------------[ cut here ]------------ [ 0.171097] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2581 _init+0x41c/0x478() [ 0.171104] omap_hwmod: wd_timer2: doesn't have mpu register target base [ 0.171110] Modules linked in: [ 0.171123] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.14.63-00013-g1dd6ecd-dirty #1 [ 0.171129] Backtrace: [ 0.171145] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 0.171152] r6:60000013 r5:ffffffff r4:00000000 r3:00000000 [ 0.171177] [] (show_stack) from [] (dump_stack+0x80/0xa0) [ 0.171190] [] (dump_stack) from [] (warn_slowpath_common+0x70/0x94) [ 0.171197] r7:00000a15 r6:c0912d0c r5:00000009 r4:ec90de48 [ 0.171223] [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x38/0x40) [ 0.171229] r8:c09132e0 r7:00000003 r6:00000000 r5:00000000 r4:c09b0b08 [ 0.171258] [] (warn_slowpath_fmt) from [] (_init+0x41c/0x478) [ 0.171265] r3:c082302c r2:c0823bf8 [ 0.171282] [] (_init) from [] (omap_hwmod_for_each+0x38/0x64) [ 0.171289] r10:c094a67c r8:c09132e0 r7:00000000 r6:c09128f0 r5:c0973820 r4:c09b0b08 [ 0.171318] [] (omap_hwmod_for_each) from [] (__omap_hwmod_setup_all+0x2c/0x48) [ 0.171324] r7:c090555c r6:c0a11140 r5:00000001 r4:c095fce8 [ 0.171349] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0xf4/0x154) [ 0.171361] [] (do_one_initcall) from [] (kernel_init_freeable+0x104/0x1d4) [ 0.171367] r10:c094a67c r9:c094a65c r8:000000e9 r7:c090555c r6:c0a11140 r5:00000001 [ 0.171390] r4:c095fce8 [ 0.171404] [] (kernel_init_freeable) from [] (kernel_init+0x10/0xf4) [ 0.171411] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c068c8b8 [ 0.171433] r4:00000000 [ 0.171447] [] (kernel_init) from [] (ret_from_fork+0x14/0x34) [ 0.171454] r4:00000000 r3:ec90c000 [ 0.171466] ---[ end trace 58f6e3a2679cbefa ]--- [ 0.287197] pinctrl core: initialized pinctrl subsystem [ 0.287943] regulator-dummy: no parameters [ 0.292318] NET: Registered protocol family 16 [ 0.294118] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.296212] cpuidle: using governor ladder [ 0.296222] cpuidle: using governor menu [ 0.343128] syscon 4a002000.tisysconcore: regmap [mem 0x4a002000-0x4a0026cf] registered [ 0.343461] syscon 4a002e00.tisyscon: regmap [mem 0x4a002e00-0x4a002e7b] registered [ 0.346295] OMAP GPIO hardware version 0.1 [ 0.352762] irq: no irq domain found for /ocp/pinmux@4a003400 ! [ 0.359377] platform 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 0.359677] platform 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ 0.359971] platform 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 0.376795] platform 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 0.382752] No ATAGs? [ 0.382778] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.382787] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.385692] OMAP DMA hardware revision 0.0 [ 0.414381] bio: create slab at 0 [ 0.429657] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.436192] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.436855] platform fixedregulator-sd: Driver reg-fixed-voltage requests probe deferral [ 0.437120] evm_3v3_sw: 3300 mV [ 0.437169] reg-fixed-voltage fixedregulator-evm_3v3_sw: Failed to find supply vin [ 0.437352] reg-fixed-voltage fixedregulator-evm_3v3_sw: Failed to register regulator: -517 [ 0.437371] platform fixedregulator-evm_3v3_sw: Driver reg-fixed-voltage requests probe deferral [ 0.437621] aic_dvdd: 1800 mV [ 0.437680] reg-fixed-voltage fixedregulator-aic_dvdd: Failed to find supply vin [ 0.437858] reg-fixed-voltage fixedregulator-aic_dvdd: Failed to register regulator: -517 [ 0.437877] platform fixedregulator-aic_dvdd: Driver reg-fixed-voltage requests probe deferral [ 0.438174] vmmcwl_fixed: 1800 mV [ 0.438535] vtt_fixed: 1350 mV [ 0.438584] reg-fixed-voltage fixedregulator-vtt: Failed to find supply vin [ 0.438802] reg-fixed-voltage fixedregulator-vtt: Failed to register regulator: -517 [ 0.438821] platform fixedregulator-vtt: Driver reg-fixed-voltage requests probe deferral [ 0.442470] vgaarb: loaded [ 0.442925] i2c-core: driver [palmas] using legacy suspend method [ 0.442934] i2c-core: driver [palmas] using legacy resume method [ 0.443529] SCSI subsystem initialized [ 0.444794] usbcore: registered new interface driver usbfs [ 0.444960] usbcore: registered new interface driver hub [ 0.445144] usbcore: registered new device driver usb [ 0.447469] palmas 0-0058: IRQ missing: skipping irq request [ 0.447818] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 0.447964] prom_parse: Bad cell count for /ocp/i2c@48070000/tps659038@58 [ 0.450098] smps123: 850 <--> 1500 mV at 1060 mV [ 0.453491] smps45: 850 <--> 1500 mV at 1060 mV [ 0.455159] smps6: 850 <--> 1500 mV at 1250 mV [ 0.456660] smps7: 850 <--> 1500 mV at 1030 mV [ 0.458339] smps8: 850 <--> 1500 mV at 1060 mV [ 0.459833] smps9: 1800 mV [ 0.461327] ldo1: 1800 <--> 3300 mV at 3000 mV [ 0.471626] ldo2: 3300 mV [ 0.481191] ldo3: 1800 mV [ 0.482057] LDO4: at 1800 mV [ 0.482656] LDO5: no parameters [ 0.483256] LDO6: no parameters [ 0.483873] LDO7: no parameters [ 0.484461] LDO8: no parameters [ 0.491220] ldo9: 1050 mV [ 0.501311] ldoln: 1800 mV [ 0.511233] ldousb: 3300 mV [ 0.511943] REGEN1: no parameters [ 0.512489] regen2: no parameters [ 0.513082] sysen1: no parameters [ 0.513695] sysen2: no parameters [ 0.514674] pcf857x 0-0020: probed [ 0.515152] pcf857x: probe of 0-0027 failed with error -121 [ 0.516082] pcf857x 0-0021: probed [ 0.516470] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.517643] pcf857x 1-0026: probed [ 0.518366] i2c i2c-1: of_i2c: modalias failure on /ocp/i2c@48072000/hdmirec@31 [ 0.518826] mcp230xx: probe of 1-0027 failed with error -121 [ 0.519316] mcp230xx: probe of 1-0021 failed with error -121 [ 0.519802] mcp230xx: probe of 1-0025 failed with error -121 [ 0.522038] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [ 0.522474] omap_i2c 48060000.i2c: bus 2 rev0.12 at 3400 kHz [ 0.522787] media: Linux media interface: v0.10 [ 0.522932] Linux video capture interface: v2.00 [ 0.523159] pps_core: LinuxPPS API ver. 1 registered [ 0.523168] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.523283] PTP clock support registered [ 0.524751] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.525207] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.526304] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.526419] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.526525] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.526629] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.526813] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.526929] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.527702] Advanced Linux Sound Architecture Driver Initialized. [ 0.529054] Switched to clocksource arch_sys_counter [ 0.547762] NET: Registered protocol family 2 [ 0.548450] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.548518] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.548650] TCP: Hash tables configured (established 8192 bind 8192) [ 0.548694] TCP: reno registered [ 0.548706] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.548738] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.548935] NET: Registered protocol family 1 [ 0.549262] RPC: Registered named UNIX socket transport module. [ 0.549271] RPC: Registered udp transport module. [ 0.549278] RPC: Registered tcp transport module. [ 0.549285] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.550358] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.553361] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.649650] bounce pool size: 64 pages [ 0.649925] VFS: Disk quotas dquot_6.5.2 [ 0.650031] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.650642] NFS: Registering the id_resolver key type [ 0.650680] Key type id_resolver registered [ 0.650689] Key type id_legacy registered [ 0.650721] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.650906] msgmni has been set to 648 [ 0.654875] alg: No test for stdrng (krng) [ 0.655052] NET: Registered protocol family 38 [ 0.655081] io scheduler noop registered [ 0.655091] io scheduler deadline registered [ 0.655128] io scheduler cfq registered (default) [ 0.661283] pinctrl-single 4a003400.pinmux: 281 pins at pa fc003400 size 1124 [ 0.699761] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 0.699776] pci_bus 0000:00: root bus resource [io 0x1000-0x10000] [ 0.699787] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.699799] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.700305] PCI: bus0: Fast back to back transfers disabled [ 0.700545] PCI: bus1: Fast back to back transfers enabled [ 0.700661] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.700676] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.700690] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.700710] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.703124] OMAP DSS rev 6.1 [ 0.708452] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 0.708529] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 0.708599] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 0.708667] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 0.708736] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 0.708803] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 0.709589] pbias_mmc_omap5: 1800 <--> 3000 mV at 3000 mV [ 0.710373] abb_mpu: 1100 <--> 1210 mV [ 0.710726] abb_ivahd: 1060 <--> 1250 mV [ 0.711074] abb_dspeve: 1060 <--> 1250 mV [ 0.711442] abb_gpu: 1060 <--> 1280 mV [ 0.712572] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.716993] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 299, base_baud = 3000000) is a 8250 [ 2.307560] console [ttyS0] enabled [ 2.311858] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 300, base_baud = 3000000) is a 8250 [ 2.321661] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250 [ 2.332311] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 2.339505] [drm] Initialized drm 1.1.0 20060810 [ 2.354737] brd: module loaded [ 2.363237] loop: module loaded [ 2.366641] (stk) :sysfs entries created [ 2.370630] (stk) : debugfs entries created [ 2.374906] (hci_tty): inside hci_tty_init [ 2.379576] (hci_tty): allocated 249, 0 [ 2.385936] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 2.392705] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.401286] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.411801] scsi0 : ahci_platform [ 2.415624] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 336 [ 2.424941] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.435966] CAN device driver interface [ 2.441062] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=350) [ 2.452128] usbcore: registered new interface driver asix [ 2.457693] usbcore: registered new interface driver ax88179_178a [ 2.463975] usbcore: registered new interface driver cdc_ether [ 2.470008] usbcore: registered new interface driver smsc95xx [ 2.475915] usbcore: registered new interface driver net1080 [ 2.481755] usbcore: registered new interface driver cdc_subset [ 2.487844] usbcore: registered new interface driver zaurus [ 2.493626] usbcore: registered new interface driver cdc_ncm [ 2.500120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.506679] ehci-pci: EHCI PCI platform driver [ 2.511300] ehci-omap: OMAP-EHCI Host Controller driver [ 2.516984] usbcore: registered new interface driver cdc_wdm [ 2.522848] usbcore: registered new interface driver usb-storage [ 2.530043] mousedev: PS/2 mouse device common for all mice [ 2.538064] i2c-core: driver [rtc-ds1307] using legacy suspend method [ 2.544550] i2c-core: driver [rtc-ds1307] using legacy resume method [ 2.551631] omap_rtc 48838000.rtcss: rtc core: registered 48838000.rtcss as rtc0 [ 2.559958] i2c /dev entries driver [ 2.564842] ov1063x 1-0037: Failed writing register 0x0103! [ 2.570507] ov1063x: probe of 1-0037 failed with error -121 [ 2.576430] ov1063x 1-0030: Failed writing register 0x0103! [ 2.582319] ov1063x: probe of 1-0030 failed with error -121 [ 2.589233] Driver for 1-wire Dallas network protocol. [ 2.595497] coproc iva_coproc: probe [ 2.599201] Adding alias for supply vdd,iva_coproc -> vdd,4a0025cc.voltdm [ 2.606019] Adding alias for supply vbb,iva_coproc -> vbb,4a0025cc.voltdm [ 2.614006] coproc iva_coproc: coproc_probe result=0 [ 2.619027] coproc dsp_coproc: probe [ 2.622717] Adding alias for supply vdd,dsp_coproc -> vdd,4a0025e0.voltdm [ 2.629553] Adding alias for supply vbb,dsp_coproc -> vbb,4a0025e0.voltdm [ 2.637431] coproc dsp_coproc: coproc_probe result=0 [ 2.643157] ti-soc-thermal 4a0021e0.bandgap: Non-trimmed BGAP, Temp not accurate [ 2.650623] ti-soc-thermal 4a0021e0.bandgap: Non-trimmed BGAP, Temp not accurate [ 2.658053] ti-soc-thermal 4a0021e0.bandgap: Non-trimmed BGAP, Temp not accurate [ 2.665495] ti-soc-thermal 4a0021e0.bandgap: Non-trimmed BGAP, Temp not accurate [ 2.672951] ti-soc-thermal 4a0021e0.bandgap: Non-trimmed BGAP, Temp not accurate [ 2.684887] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.691562] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.699112] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 2.705731] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 2.769087] ata1: SATA link down (SStatus 0 SControl 300) [ 2.830844] ledtrig-cpu: registered to indicate activity on CPUs [ 2.839209] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 2.860400] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 2.866693] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 2.873107] alg: skcipher: setkey failed on test 5 for ecb-des-omap: flags=100 [ 2.880766] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ 2.888858] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ 2.901880] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 2.907662] omap-sham 4b101000.sham: initialization failed. [ 2.913332] omap-sham: probe of 4b101000.sham failed with error -22 [ 2.920316] usbcore: registered new interface driver usbhid [ 2.925913] usbhid: USB HID core driver [ 2.931120] remoteproc0: 58820000.ipu is available [ 2.936022] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 2.945034] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 2.955546] remoteproc0: Direct firmware load failed with error -2 [ 2.961960] remoteproc1: 55020000.ipu is available [ 2.966859] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 2.975876] remoteproc0: Falling back to user helper [ 2.981110] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 2.991719] remoteproc1: Direct firmware load failed with error -2 [ 2.998014] remoteproc1: Falling back to user helper [ 3.003198] remoteproc2: 40800000.dsp is available [ 3.008098] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 3.017275] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 3.027905] remoteproc2: Direct firmware load failed with error -2 [ 3.034466] remoteproc3: 41000000.dsp is available [ 3.039385] remoteproc3: Note: remoteproc is still under development and considered experimental. [ 3.048383] remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 3.058796] remoteproc2: Falling back to user helper [ 3.059198] remoteproc3: Direct firmware load failed with error -2 [ 3.059201] remoteproc3: Falling back to user helper [ 3.080540] tlv320aic3x-codec 0-0018: Failed to get supply 'IOVDD': -517 [ 3.087274] tlv320aic3x-codec 0-0018: Failed to request supplies: -517 [ 3.093944] i2c 0-0018: Driver tlv320aic3x-codec requests probe deferral [ 3.101168] platform bt_sco_card: Driver asoc-simple-card requests probe deferral [ 3.109424] asoc-simple-card asoc-simple-card.0: hdmi-hifi <-> 58040000.encoder mapping ok [ 3.119778] davinci-mcasp 48468000.mcasp: numevt will be ignored due to errata i868 [ 3.128814] davinci-mcasp 48478000.mcasp: numevt will be ignored due to errata i868 [ 3.136964] davinci-mcasp 4847c000.mcasp: numevt will be ignored due to errata i868 [ 3.145320] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 3.152095] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 3.159011] platform primary_sound: Driver davinci_evm requests probe deferral [ 3.167499] oprofile: using timer interrupt. [ 3.171871] nf_conntrack version 0.5.0 (9393 buckets, 37572 max) [ 3.178346] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.183770] TCP: cubic registered [ 3.187099] Initializing XFRM netlink socket [ 3.191458] NET: Registered protocol family 17 [ 3.195940] NET: Registered protocol family 15 [ 3.200489] Bridge firewalling registered [ 3.204522] can: controller area network core (rev 20120528 abi 9) [ 3.210810] NET: Registered protocol family 29 [ 3.215286] can: raw protocol (rev 20120528) [ 3.219587] can: broadcast manager protocol (rev 20120528 t) [ 3.225277] can: netlink gateway (rev 20130117) max_hops=1 [ 3.230856] 8021q: 802.1Q VLAN Support v1.8 [ 3.235101] Key type dns_resolver registered [ 3.239404] NET: Registered protocol family 41 [ 3.244506] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 3.250825] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 3.258679] Power Management for TI OMAP4+ devices. [ 3.263748] ThumbEE CPU extension supported. [ 3.268041] Registering SWP/SWPB emulation handler [ 3.272859] SmartReflex Class3 initialized [ 3.278596] vmmcwl_fixed: disabling [ 3.282155] regulator-dummy: disabling [ 3.286095] dmm 4e000000.dmm: workaround for errata i878 in use [ 3.293759] dmm 4e000000.dmm: initialized all PAT entries [ 3.301346] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.307989] [drm] No driver support for vblank timestamp query. [ 3.313948] omapdrm omapdrm.0: No connectors reported connected with modes [ 3.320860] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.330005] [drm] Enabling DMM ywrap scrolling [ 3.338567] Console: switching to colour frame buffer device 128x48 [ 3.348579] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 3.354531] omapdrm omapdrm.0: registered panic notifier [ 3.359879] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 3.367244] evm_3v3_sd: 3300 mV [ 3.370757] evm_3v3_sw: 3300 mV [ 3.374024] evm_3v3_sw: supplied by sysen1 [ 3.378542] aic_dvdd: 1800 mV [ 3.381669] aic_dvdd: supplied by evm_3v3_sw [ 3.386215] vtt_fixed: 1350 mV [ 3.389466] vtt_fixed: supplied by sysen2 [ 3.393777] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 3.400099] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 3.406379] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 3.412688] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 3.418968] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 3.425265] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 3.510718] asoc-simple-card bt_sco_card: bt-sco-pcm <-> 48478000.mcasp mapping ok [ 3.519934] ALSA sound/core/init.c:213 cannot find the slot for index 0 (range 0-1), error: -16 [ 3.528676] davinci_evm primary_sound: ASoC: can't create sound card for card DRA7xx-EVM: -16 [ 3.537325] davinci_evm primary_sound: snd_soc_register_card failed (-16) [ 3.544173] davinci_evm: probe of primary_sound failed with error -16 [ 3.550778] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 3.557106] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 3.563456] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 3.569797] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 3.576160] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 3.582500] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 3.639088] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 3.645213] davinci_mdio 48485000.mdio: detected phy mask fffffff3 [ 3.655563] libphy: 48485000.mdio: probed [ 3.659635] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver unknown [ 3.667676] davinci_mdio 48485000.mdio: phy[3]: device 48485000.mdio:03, driver unknown [ 3.675861] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 3.682756] cpsw 48484000.ethernet: Detected MACID = 20:cd:39:2b:c7:cc [ 3.684852] mmc1: host does not support reading read-only switch. assuming write-enable. [ 3.686468] mmc1: new ultra high speed DDR50 SDHC card at address 0007 [ 3.704180] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 3.704353] mmcblk0: mmc1:0007 SS08G 7.21 GiB [ 3.715102] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 3.716012] mmcblk0: p1 p2 [ 3.724397] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 3.730936] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 3.737370] cpsw 48484000.ethernet: cpsw: Detected MACID = 20:cd:39:2b:c7:cd [ 3.737379] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 3.737502] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 3.757181] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 3.763600] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 3.770056] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 3.776420] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 3.782836] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 3.789247] omap_rtc 48838000.rtcss: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.789254] sr_init: No PMIC hook to init smartreflex [ 3.792352] mmc2: BKOPS_EN bit is not set [ 3.795035] mmc2: new high speed DDR MMC card at address 0001 [ 3.813003] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 3.819457] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 3.819548] mmcblk1: mmc2:0001 MMC04G 3.52 GiB [ 3.819749] mmcblk1boot0: mmc2:0001 MMC04G partition 1 16.0 MiB [ 3.819936] mmcblk1boot1: mmc2:0001 MMC04G partition 2 16.0 MiB [ 3.842136] sr_init: platform driver register failed for SR [ 3.842286] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 3.842410] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 3.842533] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 3.879726] ALSA device list: [ 3.882781] mmcblk1: unknown partition table [ 3.882785] #0: DRA7xx-WiLink [ 3.882788] #1: HDMI 58040000.encoder [ 3.895685] mmcblk1boot1: unknown partition table [ 3.901888] mmcblk1boot0: unknown partition table [ 3.907200] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 3.908925] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 3.910405] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244) [ 3.932153] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 3.938472] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 3.944814] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 3.951150] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 3.957467] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 11.395512] EXT4-fs (mmcblk0p2): recovery complete [ 11.437228] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 11.445456] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 11.453360] devtmpfs: mounted [ 11.456683] Freeing unused kernel memory: 376K (c0905000 - c0963000) INIT: version 2.88 booting Starting udev [ 11.821857] random: nonblocking pool is initialized [ 11.848653] udevd[1212]: starting version 182 [ 12.182830] Bluetooth: Core ver 2.18 [ 12.186468] NET: Registered protocol family 31 [ 12.216956] Bluetooth: HCI device and connection manager initialized [ 12.258098] Bluetooth: HCI socket layer initialized [ 12.318281] Bluetooth: L2CAP socket layer initialized [ 12.345725] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 12.371333] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 12.377686] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 12.416626] Bluetooth: SCO socket layer initialized [ 12.499131] (stc): chnl_id list empty :4 [ 12.503070] (stk) : st_kim_start[ 12.600824] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 12.607114] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 12.627861] (stk) :ldisc_install = 1 [ 12.627861] remoteproc3: failed to load dra7-dsp2-fw.xe66 [ 12.728337] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 12.746988] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 12.758897] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 12.769674] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 12.847862] remoteproc0: powering up 58820000.ipu [ 12.858446] remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 454196 [ 12.879314] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1 [ 12.900840] remoteproc0: remote processor 58820000.ipu is now up [ 12.907308] virtio_rpmsg_bus virtio0: rpmsg host is online [ 12.913011] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 12.919241] remoteproc0: registered virtio0 (type 7) [ 12.924560] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 12.931161] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 12.937547] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 12.947066] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 12.955916] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 12.962244] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 12.968552] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 12.974903] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 12.981228] i2c 1-0069: Driver fpd3_serdes requests probe deferral udevd[1495]: failed to execute '/etc/udev/scripts/mount.sh' '/etc/udev/scripts/mount.sh': No such file or directory [ 13.156641] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) [ 13.162090] 10 ofpart partitions found on MTD device spi32766.0 [ 13.168032] Creating 10 MTD partitions on "spi32766.0": [ 13.173388] 0x000000000000-0x000000010000 : "QSPI.SPL" [ 13.179978] 0x000000010000-0x000000020000 : "QSPI.SPL.backup1" [ 13.187089] 0x000000020000-0x000000030000 : "QSPI.SPL.backup2" [ 13.195114] 0x000000030000-0x000000040000 : "QSPI.SPL.backup3" [ 13.202242] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 13.209824] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 13.217112] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 13.225082] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 13.232865] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 13.240399] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 13.247662] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 13.263547] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 13.279213] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 13.285515] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 13.299207] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 13.306233] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 13.394416] remoteproc2: powering up 40800000.dsp [ 13.403343] remoteproc1: powering up 55020000.ipu [ 13.408164] remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 6631868 [ 13.417456] remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 6829082 [ 13.430224] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 13.436104] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 13.442023] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 13.447966] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 13.459946] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 13.466246] i2c 1-0064: Driver fpd3_serdes requests probe deferral udevd[1510]: failed to execute '/etc/udev/scripts/mount.sh' '/et[ 13.477038] i2c 1-0068: Driver fpd3_serdes requests probe deferral c/udev/scripts/mount.sh': No such file or directory [ 13.487784] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 13.498814] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 13.505164] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 13.533009] remoteproc1: remote processor 55020000.ipu is now up [ 13.549422] virtio_rpmsg_bus virtio2: rpmsg host is online [ 13.554954] remoteproc1: registered virtio2 (type 7) [ 13.555093] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 13.555191] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 13.555278] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 13.555363] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 13.555448] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 13.555532] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 13.603022] remoteproc2: remote processor 40800000.dsp is now up [ 13.609480] virtio_rpmsg_bus virtio1: rpmsg host is online [ 13.615002] remoteproc2: registered virtio1 (type 7) [ 13.615119] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 13.615216] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 13.615301] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 13.615385] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 13.615470] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 13.615551] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 13.619068] (stk) :ldisc installation timeout [ 13.620811] (stk) :ldisc_install = 0 [ 13.620812] virtio_rpmsg_bus virtio1: creating channel rpmsg-proto addr 0x50 [ 13.621361] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 13.621448] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 13.621530] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 13.621610] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 13.621692] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 13.621772] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 13.622599] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x50 [ 13.623687] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x50 [ 13.624787] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 13.624878] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 13.624964] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 13.625046] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 13.625128] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 13.625212] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 13.929741] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 13.936032] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 13.943864] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 13.954104] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 13.960446] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 13.966736] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 14.007682] dwc3 48890000.usb: otg: primary host xhci-hcd.0.auto registered [ 14.019004] dwc3 48890000.usb: otg: shared host xhci-hcd.0.auto registered [ 14.031387] dwc3 48890000.usb: otg: can't start till gadget registers [ 14.038450] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 14.044941] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 14.050788] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 14.057540] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 14.063896] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 14.071717] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 14.078464] xhci-hcd xhci-hcd.1.auto: irq 432, io mem 0x488d0000 [ 14.084569] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 14.089218] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 14.089223] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.089227] usb usb1: Product: xHCI Host Controller [ 14.089230] usb usb1: Manufacturer: Linux 3.14.63-00013-g1dd6ecd-dirty xhci-hcd [ 14.089233] usb usb1: SerialNumber: xhci-hcd.1.auto [ 14.089863] hub 1-0:1.0: USB hub found [ 14.089891] hub 1-0:1.0: 1 port detected [ 14.090160] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 14.090366] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 14.090525] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 14.090529] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.090532] usb usb2: Product: xHCI Host Controller [ 14.090536] usb usb2: Manufacturer: Linux 3.14.63-00013-g1dd6ecd-dirty xhci-hcd [ 14.090539] usb usb2: SerialNumber: xhci-hcd.1.auto [ 14.091114] hub 2-0:1.0: USB hub found [ 14.091140] hub 2-0:1.0: 1 port detected [ 14.182363] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 14.188661] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 14.197175] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 14.205908] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 14.212687] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 14.219879] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 14.273198] using random self ethernet address [ 14.277668] using random host ethernet address [ 14.282644] usb0: HOST MAC be:be:7c:d4:68:d9 [ 14.286987] usb0: MAC d6:ef:c3:03:2d:d0 [ 14.290922] g_ncm gadget: NCM Gadget [ 14.294512] g_ncm gadget: g_ncm ready [ 14.298190] dwc3 48890000.usb: otg: gadget gadget registered [ 14.609082] (stk) : timed out waiting for ldisc to be un-installed [ 14.722128] (stk) :ldisc_install = 1(stk) :ldisc installation timeout [ 15.721969] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed [ 16.830828] (stk) :ldisc_install = 1(stk) :ldisc installation timeout [ 17.831975] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed [ 18.940811] (stk) :ldisc_install = 1(stk) :ldisc installation timeout [ 19.941967] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed [ 21.050826] (stk) :ldisc_install = 1(stk) :ldisc installation timeout [ 22.052074] (stk) :ldisc_install = 0[ 22.672663] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory bootlogd. ALSA: Restoring mixer settings... [ 23.049120] (stk) : timed out waiting for ldisc to be un-installedNo state is present for card DRA7xxWiLink Found hardware: "DRA7xx-WiLink" "" "" "" "" Hardware is initialized using a generic method No state is present for card DRA7xxWiLink No state is present for card H58040000encode Found hardware: "HDMI_58040000_e" "" "" "" "" Hardware is initialized using a generic method No state is present for card H58040000encode Thu Mar 24 18:36:00 UTC 2016 INIT: Entering runlevel: 5 [ 23.162438] (stk) :ldisc_install = 1Configuring network interfaces... [ 23.304626] net eth0: initializing cpsw version 1.15 (0) [ 23.313269] i2c 1-0069: Driver fpd3_serdes requests probe deferral [ 23.319786] i2c 1-0060: Driver fpd3_serdes requests probe deferral [ 23.326107] i2c 1-0064: Driver fpd3_serdes requests probe deferral [ 23.332493] i2c 1-0068: Driver fpd3_serdes requests probe deferral [ 23.338813] i2c 1-006c: Driver fpd3_serdes requests probe deferral [ 23.345155] i2c 1-0061: Driver fpd3_serdes requests probe deferral [ 23.392872] net eth0: phy found : id is : 0x20005c7a [ 23.405114] 8021q: adding VLAN 0 to HW filter on device eth0 udhcpc (v1.22.1) started Sending discover... [ 24.159087] (stk) :ldisc installation timeout [ 24.163291] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed [ 25.165811] Bluetooth: st_register failed -22 Sending discover... Sending discover... No lease, forking to background done. Starting system message bus: dbus. UIM SYSFS Node Found at /sys/./devices/kim/install Starting uim-sysfs daemon. Starting telnet daemonuim:@ main uim:install = /sys/./devices/kim/install uim:dev_name = /sys/./devices/kim/dev_name uim:baud_rate = /sys/./devices/kim/baud_rate uim:flow_cntrl = /sys/./devices/kim/flow_cntrl uim:begin polling... . Starting tiipclad daemon GateMP support enabled on host Opened log file: lad.txt numProcessors = 5 id = 0 baseId = 0 Spawned daemon: /usr/bin/lad_dra7xx . Starting rpcbind daemon...rpcbind: cannot create socket for udp6 rpcbind: cannot create socket for tcp6 done. creating NFS state directory: done starting statd: done NFS daemon support not enabled in kernel Starting syslogd/klogd: done Starting thttpd. Enabling thermal zones... Stopping Bootlog daemon: bootlogd. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm /dev/ttyO0 Arago 2013.10 dra7xx-evm /dev/ttyO0 dra7xx-evm login: root root@dra7xx-evm:~#