Jul 24 06:58:42 rfs200 user.debug redstripe: applauncher 42.812:Main Thread ID: 0xb6fb3000 Jul 24 06:59:02 rfs200 user.debug kernel: [ 33.120300] pwm-backlight backlight: GPIO lookup for consumer enable Jul 24 06:59:02 rfs200 user.debug kernel: [ 33.120330] pwm-backlight backlight: using device tree for GPIO lookup Jul 24 06:59:02 rfs200 user.debug kernel: [ 33.120391] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/backlight[0]' Jul 24 06:59:02 rfs200 user.debug kernel: [ 33.120422] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/backlight[0]' Jul 24 06:59:02 rfs200 user.debug kernel: [ 33.120452] pwm-backlight backlight: using lookup tables for GPIO lookup Jul 24 06:59:02 rfs200 user.debug kernel: [ 33.120483] pwm-backlight backlight: No GPIO consumer enable found Jul 24 06:59:02 rfs200 user.info kernel: [ 33.120819] pwm-backlight backlight: Linked as a consumer to regulator.2 Jul 24 06:59:02 rfs200 user.info kernel: [ 33.128143] pwm-backlight backlight: Dropping the link to regulator.2 Jul 24 06:59:02 rfs200 user.debug kernel: [ 33.135864] panel-dpi display: GPIO lookup for consumer enable Jul 24 06:59:02 rfs200 user.debug kernel: [ 33.135894] panel-dpi display: using device tree for GPIO lookup Jul 24 06:59:02 rfs200 user.debug kernel: [ 33.135955] panel-dpi display: No GPIO consumer enable found Jul 24 06:59:02 rfs200 user.info kernel: [ 33.169189] platform backlight: deferred probe pending Jul 24 06:59:02 rfs200 user.info kernel: [ 33.174591] platform display: deferred probe pending Jul 24 06:59:02 rfs200 user.info kernel: [ 33.179870] platform leds: deferred probe pending Jul 24 06:59:02 rfs200 user.info kernel: [ 33.184814] platform omapdrm.0: deferred probe pending Jul 24 06:59:02 rfs200 user.info kernel: [ 33.190246] i2c 2-0048: deferred probe pending Jul 24 06:59:03 rfs200 user.info kernel: [ 33.760284] VAUX3: disabling Jul 24 06:59:20 rfs200 auth.info login[178]: root login on 'console' Jul 24 07:00:52 rfs200 user.notice kernel: [ 142.710754] random: crng init done Jul 24 07:00:52 rfs200 user.notice kernel: [ 142.714599] random: 2 urandom warning(s) missed due to ratelimiting Jul 24 08:27:06 rfs200 syslog.info syslogd started: BusyBox v1.24.1 Jul 24 08:27:06 rfs200 user.notice kernel: klogd started: BusyBox v1.24.1 (2016-12-07 16:43:21 CST) Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Jul 24 08:27:06 rfs200 user.notice kernel: [ 0.000000] Linux version 4.19.288-rfs200-7.0 (nadens3@BB022J3) (gcc version 5.3.0 (Buildroot 2016.02)) #3 Mon Jul 24 11:46:43 IST 2023 Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c5387d Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] OF: fdt: Machine model: TI OMAP3 RFS200 Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] Memory policy: Data cache writeback Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] cma: Reserved 16 MiB at 0x8ec00000 Jul 24 08:27:06 rfs200 user.debug kernel: [ 0.000000] On node 0 totalpages: 65280 Jul 24 08:27:06 rfs200 user.debug kernel: [ 0.000000] Normal zone: 510 pages used for memmap Jul 24 08:27:06 rfs200 user.debug kernel: [ 0.000000] Normal zone: 0 pages reserved Jul 24 08:27:06 rfs200 user.debug kernel: [ 0.000000] Normal zone: 65280 pages, LIFO batch:15 Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] CPU: All CPU(s) started in SVC mode. Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] OMAP3430/3530 ES3.1.2 (l2cache iva sgx neon isp) Jul 24 08:27:06 rfs200 user.debug kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 Jul 24 08:27:06 rfs200 user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64770 Jul 24 08:27:06 rfs200 user.notice kernel: [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=ubi0:rootfs ubi.mtd=4 noinitrd rootfstype=ubifs rootdelay=2 vt.global_cursor_default=0 Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] Memory: 225232K/261120K available (7168K kernel code, 319K rwdata, 2248K rodata, 1024K init, 5295K bss, 19504K reserved, 16384K cma-reserved, 0K highmem) Jul 24 08:27:06 rfs200 user.notice kernel: [ 0.000000] Virtual kernel memory layout: Jul 24 08:27:06 rfs200 user.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) Jul 24 08:27:06 rfs200 user.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) Jul 24 08:27:06 rfs200 user.notice kernel: [ 0.000000] vmalloc : 0xd0000000 - 0xff800000 ( 760 MB) Jul 24 08:27:06 rfs200 user.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xcff00000 ( 255 MB) Jul 24 08:27:06 rfs200 user.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) Jul 24 08:27:06 rfs200 user.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) Jul 24 08:27:06 rfs200 user.notice kernel: [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (8160 kB) Jul 24 08:27:06 rfs200 user.notice kernel: [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) Jul 24 08:27:06 rfs200 user.notice kernel: [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 320 kB) Jul 24 08:27:06 rfs200 user.notice kernel: [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (5296 kB) Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 4.0) with 96 interrupts Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns Jul 24 08:27:06 rfs200 user.info kernel: [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz Jul 24 08:27:06 rfs200 user.info kernel: [ 0.001251] Console: colour dummy device 80x30 Jul 24 08:27:06 rfs200 user.warn kernel: [ 0.001281] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar Jul 24 08:27:06 rfs200 user.warn kernel: [ 0.001312] ... MAX_LOCKDEP_SUBCLASSES: 8 Jul 24 08:27:06 rfs200 user.warn kernel: [ 0.001342] ... MAX_LOCK_DEPTH: 48 Jul 24 08:27:06 rfs200 user.warn kernel: [ 0.001342] ... MAX_LOCKDEP_KEYS: 8191 Jul 24 08:27:06 rfs200 user.warn kernel: [ 0.001373] ... CLASSHASH_SIZE: 4096 Jul 24 08:27:06 rfs200 user.warn kernel: [ 0.001373] ... MAX_LOCKDEP_ENTRIES: 32768 Jul 24 08:27:06 rfs200 user.warn kernel: [ 0.001403] ... MAX_LOCKDEP_CHAINS: 65536 Jul 24 08:27:07 rfs200 user.warn kernel: [ 0.001403] ... CHAINHASH_SIZE: 32768 Jul 24 08:27:07 rfs200 user.warn kernel: [ 0.001434] memory used by lock dependency info: 4639 kB Jul 24 08:27:07 rfs200 user.warn kernel: [ 0.001464] per task-struct memory footprint: 1536 bytes Jul 24 08:27:07 rfs200 user.info kernel: [ 0.001525] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.048400] pid_max: default: 32768 minimum: 301 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.048706] Security Framework initialized Jul 24 08:27:07 rfs200 user.info kernel: [ 0.048858] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.048919] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.050537] CPU: Testing write buffer coherency: ok Jul 24 08:27:07 rfs200 user.info kernel: [ 0.050689] CPU0: Spectre v2: using BPIALL workaround Jul 24 08:27:07 rfs200 user.info kernel: [ 0.053039] Setting up static identity map for 0x80100000 - 0x80100078 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.056945] devtmpfs: initialized Jul 24 08:27:07 rfs200 user.info kernel: [ 0.111663] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.112335] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jul 24 08:27:07 rfs200 user.info kernel: [ 0.112396] futex hash table entries: 256 (order: 1, 11264 bytes) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.114013] pinctrl core: initialized pinctrl subsystem Jul 24 08:27:07 rfs200 user.info kernel: [ 0.118530] NET: Registered protocol family 16 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.122985] DMA: preallocated 256 KiB pool for atomic coherent allocations Jul 24 08:27:07 rfs200 user.warn kernel: [ 0.176300] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp Jul 24 08:27:07 rfs200 user.warn kernel: [ 0.177856] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp Jul 24 08:27:07 rfs200 user.info kernel: [ 0.300415] cpuidle: using governor ladder Jul 24 08:27:07 rfs200 user.info kernel: [ 0.300476] cpuidle: using governor menu Jul 24 08:27:07 rfs200 user.info kernel: [ 0.301239] Reprogramming SDRC clock to 332000000 Hz Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.312103] gpio gpiochip0: (gpio-0-31): added GPIO chardev (254:0) Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.312469] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio-0-31) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.312530] OMAP GPIO hardware version 2.5 Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.314361] gpio gpiochip1: (gpio-32-63): added GPIO chardev (254:1) Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.314605] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio-32-63) Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.316253] gpio gpiochip2: (gpio-64-95): added GPIO chardev (254:2) Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.316528] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio-64-95) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.335968] omap-gpmc 6e000000.gpmc: GPMC revision 5.0 Jul 24 08:27:07 rfs200 user.warn kernel: [ 0.336120] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.336181] gpiochip_find_base: found new base at 508 Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.336853] gpio gpiochip3: (omap-gpmc): added GPIO chardev (254:3) Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.337127] gpiochip_setup_dev: registered GPIOs 508 to 511 on device: gpiochip3 (omap-gpmc) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.345581] No ATAGs? Jul 24 08:27:07 rfs200 user.info kernel: [ 0.345611] hw-breakpoint: debug architecture 0x4 unsupported. Jul 24 08:27:07 rfs200 user.info kernel: [ 0.347961] OMAP DMA hardware revision 4.0 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.399261] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.400390] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3[0]' Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.401245] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixed_regulator[0]' Jul 24 08:27:07 rfs200 user.info kernel: [ 0.408447] omap-iommu 480bd400.mmu: 480bd400.mmu registered Jul 24 08:27:07 rfs200 user.info kernel: [ 0.409362] iommu: Adding device 480bc000.isp to group 0 Jul 24 08:27:07 rfs200 user.notice kernel: [ 0.412536] SCSI subsystem initialized Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.413360] libata version 3.00 loaded. Jul 24 08:27:07 rfs200 user.info kernel: [ 0.414123] usbcore: registered new interface driver usbfs Jul 24 08:27:07 rfs200 user.info kernel: [ 0.414337] usbcore: registered new interface driver hub Jul 24 08:27:07 rfs200 user.info kernel: [ 0.414489] usbcore: registered new device driver usb Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.415008] usb_phy_generic hsusb1_phy: GPIO lookup for consumer reset Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.415008] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.415069] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/hsusb1_phy[0]' Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.415100] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/hsusb1_phy[0]' Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.415100] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.415191] usb_phy_generic hsusb1_phy: No GPIO consumer reset found Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.415222] usb_phy_generic hsusb1_phy: GPIO lookup for consumer vbus-detect Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.415252] usb_phy_generic hsusb1_phy: using device tree for GPIO lookup Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.415283] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/hsusb1_phy[0]' Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.415313] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/hsusb1_phy[0]' Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.415313] usb_phy_generic hsusb1_phy: using lookup tables for GPIO lookup Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.415344] usb_phy_generic hsusb1_phy: No GPIO consumer vbus-detect found Jul 24 08:27:07 rfs200 user.info kernel: [ 0.415802] usb_phy_generic hsusb1_phy: Linked as a consumer to regulator.1 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.419006] omap_i2c 48070000.i2c: bus 0 rev3.3 at 2600 kHz Jul 24 08:27:07 rfs200 user.info kernel: [ 0.420410] omap_i2c 48072000.i2c: bus 1 rev3.3 at 400 kHz Jul 24 08:27:07 rfs200 user.info kernel: [ 0.424011] clocksource: Switched to clocksource 32k_counter Jul 24 08:27:07 rfs200 user.notice kernel: [ 0.424652] VFS: Disk quotas dquot_6.6.0 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.424804] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.454437] NET: Registered protocol family 2 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.455078] IP idents hash table entries: 4096 (order: 3, 32768 bytes) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.456512] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5120 bytes) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.456634] TCP established hash table entries: 2048 (order: 1, 8192 bytes) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.456695] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.457275] TCP: Hash tables configured (established 2048 bind 2048) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.457641] UDP hash table entries: 256 (order: 2, 20480 bytes) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.457855] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.458404] NET: Registered protocol family 1 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.460601] RPC: Registered named UNIX socket transport module. Jul 24 08:27:07 rfs200 user.info kernel: [ 0.460632] RPC: Registered udp transport module. Jul 24 08:27:07 rfs200 user.info kernel: [ 0.460662] RPC: Registered tcp transport module. Jul 24 08:27:07 rfs200 user.info kernel: [ 0.460662] RPC: Registered tcp NFSv4.1 backchannel transport module. Jul 24 08:27:07 rfs200 user.info kernel: [ 0.465240] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available Jul 24 08:27:07 rfs200 user.info kernel: [ 0.472106] workingset: timestamp_bits=30 max_order=16 bucket_order=0 Jul 24 08:27:07 rfs200 user.notice kernel: [ 0.474670] NFS: Registering the id_resolver key type Jul 24 08:27:07 rfs200 user.notice kernel: [ 0.475036] Key type id_resolver registered Jul 24 08:27:07 rfs200 user.notice kernel: [ 0.475067] Key type id_legacy registered Jul 24 08:27:07 rfs200 user.info kernel: [ 0.488983] jitterentropy: Initialization failed with host not compliant with requirements: 2 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.489166] io scheduler noop registered (default) Jul 24 08:27:07 rfs200 user.info kernel: [ 0.489196] io scheduler deadline registered Jul 24 08:27:07 rfs200 user.info kernel: [ 0.489227] io scheduler mq-deadline registered Jul 24 08:27:07 rfs200 user.info kernel: [ 0.489227] io scheduler kyber registered Jul 24 08:27:07 rfs200 user.warn kernel: [ 0.491210] ti-sysc 480cb024.target-module: sysc_flags 00000100 != 00000110 Jul 24 08:27:07 rfs200 user.warn kernel: [ 0.492767] ti-sysc 480c9024.target-module: sysc_flags 00000100 != 00000110 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.497192] pinctrl-single 48002030.pinmux: 284 pins, size 568 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.498138] pinctrl-single 48002a00.pinmux: 46 pins, size 92 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.499176] pinctrl-single 480025d8.pinmux: 18 pins, size 36 Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.501342] pwm-backlight backlight: GPIO lookup for consumer enable Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.501373] pwm-backlight backlight: using device tree for GPIO lookup Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.501403] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/backlight[0]' Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.501434] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/backlight[0]' Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.501464] pwm-backlight backlight: using lookup tables for GPIO lookup Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.501464] pwm-backlight backlight: No GPIO consumer enable found Jul 24 08:27:07 rfs200 user.info kernel: [ 0.501770] pwm-backlight backlight: Linked as a consumer to regulator.2 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.502502] pwm-backlight backlight: Dropping the link to regulator.2 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.506958] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Jul 24 08:27:07 rfs200 user.info kernel: [ 0.511871] omap_uart 4806a000.serial: no wakeirq for uart0 Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.511932] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp@68000000/serial@4806a000[0]' Jul 24 08:27:07 rfs200 user.info kernel: [ 0.512329] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0 Jul 24 08:27:07 rfs200 user.info kernel: [ 0.513580] omap_uart 4806c000.serial: no wakeirq for uart1 Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.513671] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp@68000000/serial@4806c000[0]' Jul 24 08:27:07 rfs200 user.info kernel: [ 0.513885] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1 Jul 24 08:27:07 rfs200 user.debug kernel: [ 0.515472] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp@68000000/serial@49020000[0]' Jul 24 08:27:07 rfs200 user.info kernel: [ 0.515716] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2 Jul 24 08:27:07 rfs200 user.info kernel: [ 1.249359] console [ttyO2] enabled Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.256469] DSS: set fck to 172800000 Jul 24 08:27:07 rfs200 user.warn kernel: [ 1.256591] omapdss_dss 48050000.dss: 48050000.dss supply vdda_video not found, using dummy regulator Jul 24 08:27:07 rfs200 user.info kernel: [ 1.266571] omapdss_dss 48050000.dss: Linked as a consumer to regulator.0 Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.273742] DSS: dss_runtime_get Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.273834] DSS: dss_restore_context Jul 24 08:27:07 rfs200 user.info kernel: [ 1.273864] DSS: OMAP DSS rev 2.0 Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.277404] DSS: dss_runtime_put Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.277404] DSS: dss_save_context Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.277435] DSS: context saved Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.278686] DSS: dss_restore_context Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.278717] DSS: context restored Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.278991] DISPC: dispc_runtime_get Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.279052] DISPC: fifo(0) threshold (bytes), old 960/1023, new 960/1023 Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.279052] DISPC: fifo(1) threshold (bytes), old 960/1023, new 960/1023 Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.279083] DISPC: fifo(2) threshold (bytes), old 960/1023, new 960/1023 Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.279083] DISPC: dispc_restore_context Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.279113] DISPC: dispc_restore_gamma_tables() Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.279113] DISPC: fifo(0) threshold (bytes), old 960/1023, new 960/1023 Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.279144] DISPC: fifo(1) threshold (bytes), old 960/1023, new 960/1023 Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.279144] DISPC: fifo(2) threshold (bytes), old 960/1023, new 960/1023 Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.279174] omapdss_dispc 48050400.dispc: OMAP DISPC rev 3.0 Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.279174] DISPC: dispc_runtime_put Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.279205] DISPC: dispc_save_context Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.279266] DISPC: context saved Jul 24 08:27:07 rfs200 user.info kernel: [ 1.279388] omapdss_dss 48050000.dss: bound 48050400.dispc (ops dispc_component_ops) Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.288665] panel-dpi display: GPIO lookup for consumer enable Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.288696] panel-dpi display: using device tree for GPIO lookup Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.288757] panel-dpi display: No GPIO consumer enable found Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.291595] DSS: dss_save_context Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.291595] DSS: context saved Jul 24 08:27:07 rfs200 user.info kernel: [ 1.317047] brd: module loaded Jul 24 08:27:07 rfs200 user.info kernel: [ 1.345367] loop: module loaded Jul 24 08:27:07 rfs200 user.warn kernel: [ 1.351684] Skipping twl internal clock init and using bootloader value (unknown osc rate) Jul 24 08:27:07 rfs200 user.info kernel: [ 1.366424] twl 0-0048: PIH (irq 23) chaining IRQs 147..155 Jul 24 08:27:07 rfs200 user.info kernel: [ 1.372558] twl 0-0048: power (irq 152) chaining IRQs 155..162 Jul 24 08:27:07 rfs200 user.info kernel: [ 1.423645] twl4030_gpio twl4030-gpio: gpio (irq 147) chaining IRQs 163..180 Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.431579] gpiochip_find_base: found new base at 488 Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.432128] gpio gpiochip4: (twl4030): added GPIO chardev (254:4) Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.432403] gpiochip_setup_dev: registered GPIOs 488 to 507 on device: gpiochip4 (twl4030) Jul 24 08:27:07 rfs200 user.info kernel: [ 1.434814] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Linked as a consumer to regulator.18 Jul 24 08:27:07 rfs200 user.info kernel: [ 1.444396] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Linked as a consumer to regulator.16 Jul 24 08:27:07 rfs200 user.info kernel: [ 1.453857] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Linked as a consumer to regulator.17 Jul 24 08:27:07 rfs200 user.info kernel: [ 1.534881] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Initialized TWL4030 USB module Jul 24 08:27:07 rfs200 user.err kernel: [ 1.567352] mtdoops: mtd device (mtddev=name/number) must be supplied Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.575622] omap2-nand 30000000.nand: GPIO lookup for consumer rb Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.575653] omap2-nand 30000000.nand: using device tree for GPIO lookup Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.575714] of_get_named_gpiod_flags: can't parse 'rb-gpios' property of node '/ocp@68000000/gpmc@6e000000/nand@0,0[0]' Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.575744] of_get_named_gpiod_flags: can't parse 'rb-gpio' property of node '/ocp@68000000/gpmc@6e000000/nand@0,0[0]' Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.575744] omap2-nand 30000000.nand: using lookup tables for GPIO lookup Jul 24 08:27:07 rfs200 user.debug kernel: [ 1.575775] omap2-nand 30000000.nand: No GPIO consumer rb found Jul 24 08:27:07 rfs200 user.info kernel: [ 1.576110] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xbc Jul 24 08:27:07 rfs200 user.info kernel: [ 1.582733] nand: Micron MT29F4G16ABBDA3W Jul 24 08:27:07 rfs200 user.info kernel: [ 1.587036] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Jul 24 08:27:07 rfs200 user.info kernel: [ 1.595001] nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW Jul 24 08:27:07 rfs200 user.notice kernel: [ 1.604034] 7 fixed-partitions partitions found on MTD device omap2-nand.0 Jul 24 08:27:07 rfs200 user.notice kernel: [ 1.611328] Creating 7 MTD partitions on "omap2-nand.0": Jul 24 08:27:07 rfs200 user.notice kernel: [ 1.616943] 0x000000000000-0x000000080000 : "spl-nand" Jul 24 08:27:07 rfs200 user.notice kernel: [ 1.626068] 0x000000080000-0x000000260000 : "bootloader-nand" Jul 24 08:27:07 rfs200 user.notice kernel: [ 1.636291] 0x000000260000-0x000000280000 : "params-nand" Jul 24 08:27:07 rfs200 us[ 99.505920] random: crng init done er.notice kernel: [ 1.644500] 0x000000280000-[ 99.512725] random: 2 urandom warning(s) missed due to ratelimiting 0x000000800000 : "kernel-nand" Jul 24 08:27:07 rfs200 user.notice kernel: [ 1.657623] 0x000000800000-0x00000e200000 : "filesystem-nand-BANK_A" Jul 24 08:27:07 rfs200 user.notice kernel: [ 1.870056] 0x00000e200000-0x00001bc00000 : "filesystem-nand-BANK_B" Jul 24 08:27:07 rfs200 user.notice kernel: [ 2.082519] 0x00001bc00000-0x000020000000 : "persistent-data" Jul 24 08:27:07 rfs200 user.debug kernel: [ 2.164276] mdio_bus fixed-0: GPIO lookup for consumer reset Jul 24 08:27:07 rfs200 user.debug kernel: [ 2.164306] mdio_bus fixed-0: using lookup tables for GPIO lookup Jul 24 08:27:07 rfs200 user.debug kernel: [ 2.164337] mdio_bus fixed-0: No GPIO consumer reset found Jul 24 08:27:07 rfs200 user.info kernel: [ 2.167114] usbcore: registered new interface driver asix Jul 24 08:27:07 rfs200 user.info kernel: [ 2.172912] usbcore: registered new interface driver cdc_ether Jul 24 08:27:07 rfs200 user.info kernel: [ 2.179290] usbcore: registered new interface driver smsc95xx Jul 24 08:27:07 rfs200 user.info kernel: [ 2.187561] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 24 08:27:07 rfs200 user.info kernel: [ 2.194519] ehci-omap: OMAP-EHCI Host Controller driver Jul 24 08:27:07 rfs200 user.err kernel: [ 2.200805] OF: /ocp@68000000/usbhshost@48064000/ehci@48064800: could not get #phy-cells for /hsusb1_phy Jul 24 08:27:07 rfs200 user.info kernel: [ 2.210815] ehci-omap 48064800.ehci: EHCI Host Controller Jul 24 08:27:07 rfs200 user.info kernel: [ 2.217498] ehci-omap 48064800.ehci: new USB bus registered, assigned bus number 1 Jul 24 08:27:07 rfs200 user.info kernel: [ 2.226806] ehci-omap 48064800.ehci: irq 93, io mem 0x48064800 Jul 24 08:27:07 rfs200 user.info kernel: [ 2.254211] ehci-omap 48064800.ehci: USB 2.0 started, EHCI 1.00 Jul 24 08:27:07 rfs200 user.info kernel: [ 2.261413] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 Jul 24 08:27:07 rfs200 user.info kernel: [ 2.270141] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 24 08:27:07 rfs200 user.info kernel: [ 2.277740] usb usb1: Product: EHCI Host Controller Jul 24 08:27:07 rfs200 user.info kernel: [ 2.282836] usb usb1: Manufacturer: Linux 4.19.288-rfs200-7.0 ehci_hcd Jul 24 08:27:07 rfs200 user.info kernel: [ 2.289703] usb usb1: SerialNumber: 48064800.ehci Jul 24 08:27:07 rfs200 user.info kernel: [ 2.296783] hub 1-0:1.0: USB hub found Jul 24 08:27:07 rfs200 user.info kernel: [ 2.300842] hub 1-0:1.0: 3 ports detected Jul 24 08:27:07 rfs200 user.info kernel: [ 2.307617] usbcore: registered new interface driver usb-storage Jul 24 08:27:07 rfs200 user.info kernel: [ 2.314056] usbcore: registered new interface driver cypress_cy7c63 Jul 24 08:27:07 rfs200 user.info kernel: [ 2.322906] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver Jul 24 08:27:07 rfs200 user.info kernel: [ 2.329803] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2 Jul 24 08:27:07 rfs200 user.info kernel: [ 2.339324] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 Jul 24 08:27:07 rfs200 user.info kernel: [ 2.348083] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 24 08:27:07 rfs200 user.info kernel: [ 2.355682] usb usb2: Product: MUSB HDRC host driver Jul 24 08:27:07 rfs200 user.info kernel: [ 2.360870] usb usb2: Manufacturer: Linux 4.19.288-rfs200-7.0 musb-hcd Jul 24 08:27:07 rfs200 user.info kernel: [ 2.367736] usb usb2: SerialNumber: musb-hdrc.0.auto Jul 24 08:27:07 rfs200 user.info kernel: [ 2.374664] hub 2-0:1.0: USB hub found Jul 24 08:27:07 rfs200 user.info kernel: [ 2.378875] hub 2-0:1.0: 1 port detected Jul 24 08:27:07 rfs200 user.debug kernel: [ 2.386077] userial_init: registered 4 ttyGS* devices Jul 24 08:27:07 rfs200 user.info kernel: [ 2.386169] udc-core: couldn't find an available UDC - added [g_serial] to list of pending drivers Jul 24 08:27:07 rfs200 user.info kernel: [ 2.398742] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input0 Jul 24 08:27:07 rfs200 user.info kernel: [ 2.414123] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC Jul 24 08:27:08 rfs200 user.info kernel: [ 2.423522] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48:rtc as rtc0 Jul 24 08:27:08 rfs200 user.info kernel: [ 2.433990] i2c /dev entries driver Jul 24 08:27:08 rfs200 user.info kernel: [ 2.438964] Driver for 1-wire Dallas network protocol. Jul 24 08:27:08 rfs200 user.info kernel: [ 2.445343] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode Jul 24 08:27:08 rfs200 user.info kernel: [ 2.604187] usb 1-1: new high-speed USB device number 2 using ehci-omap Jul 24 08:27:08 rfs200 user.warn kernel: [ 2.656341] adcxx spi0.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). Jul 24 08:27:08 rfs200 user.info kernel: [ 2.670989] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d Jul 24 08:27:08 rfs200 user.info kernel: [ 2.681640] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec Jul 24 08:27:08 rfs200 user.info kernel: [ 2.691925] w1_master_driver w1_bus_master1: Family 1 for 01.000000000000.3d is not registered. Jul 24 08:27:08 rfs200 user.info kernel: [ 2.703887] cpu cpu0: Linked as a consumer to regulator.8 Jul 24 08:27:08 rfs200 user.info kernel: [ 2.710357] cpu cpu0: Dropping the link to regulator.8 Jul 24 08:27:08 rfs200 user.info kernel: [ 2.716705] cpu cpu0: Linked as a consumer to regulator.8 Jul 24 08:27:08 rfs200 user.debug kernel: [ 2.728027] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd Jul 24 08:27:08 rfs200 user.debug kernel: [ 2.728027] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup Jul 24 08:27:08 rfs200 user.debug kernel: [ 2.728088] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp@68000000/mmc@4809c000[0]' Jul 24 08:27:08 rfs200 user.debug kernel: [ 2.728118] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp@68000000/mmc@4809c000[0]' Jul 24 08:27:08 rfs200 user.debug kernel: [ 2.728149] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup Jul 24 08:27:08 rfs200 user.debug kernel: [ 2.728179] omap_hsmmc 4809c000.mmc: No GPIO consumer cd found Jul 24 08:27:08 rfs200 user.debug kernel: [ 2.728179] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp Jul 24 08:27:08 rfs200 user.debug kernel: [ 2.728210] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup Jul 24 08:27:08 rfs200 user.debug kernel: [ 2.728240] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp@68000000/mmc@4809c000[0]' Jul 24 08:27:08 rfs200 user.debug kernel: [ 2.728271] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp@68000000/mmc@4809c000[0]' Jul 24 08:27:08 rfs200 user.debug kernel: [ 2.728302] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup Jul 24 08:27:08 rfs200 user.debug kernel: [ 2.728302] omap_hsmmc 4809c000.mmc: No GPIO consumer wp found Jul 24 08:27:08 rfs200 user.info kernel: [ 2.729614] omap_hsmmc 4809c000.mmc: Linked as a consumer to regulator.14 Jul 24 08:27:08 rfs200 user.info kernel: [ 2.737640] omap_hsmmc 4809c000.mmc: Linked as a consumer to regulator.21 Jul 24 08:27:08 rfs200 user.info kernel: [ 2.745056] omap_hsmmc 4809c000.mmc: Linked as a consumer to regulator.3 Jul 24 08:27:08 rfs200 user.info kernel: [ 2.786071] ledtrig-cpu: registered to indicate activity on CPUs Jul 24 08:27:08 rfs200 user.info kernel: [ 2.803771] oprofile: using arm/armv7 Jul 24 08:27:08 rfs200 user.info kernel: [ 2.808288] pktgen: Packet Generator for packet performance testing. Version: 2.75 Jul 24 08:27:08 rfs200 user.info kernel: [ 2.819549] usb 1-1: New USB device found, idVendor=0424, idProduct=2517, bcdDevice= 0.02 Jul 24 08:27:08 rfs200 user.info kernel: [ 2.828460] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jul 24 08:27:08 rfs200 user.info kernel: [ 2.839996] hub 1-1:1.0: USB hub found Jul 24 08:27:08 rfs200 user.info kernel: [ 2.850463] xt_time: kernel timezone is -0000 Jul 24 08:27:08 rfs200 user.info kernel: [ 2.858367] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully Jul 24 08:27:08 rfs200 user.info kernel: [ 2.866088] Initializing XFRM netlink socket Jul 24 08:27:08 rfs200 user.info kernel: [ 2.871154] NET: Registered protocol family 17 Jul 24 08:27:08 rfs200 user.info kernel: [ 2.876159] NET: Registered protocol family 15 Jul 24 08:27:08 rfs200 user.notice kernel: [ 2.881805] Key type dns_resolver registered Jul 24 08:27:08 rfs200 user.info kernel: [ 2.886993] ThumbEE CPU extension supported. Jul 24 08:27:08 rfs200 user.info kernel: [ 2.894714] SmartReflex Class3 initialized Jul 24 08:27:08 rfs200 user.info kernel: [ 2.900878] hub 1-1:1.0: 7 ports detected Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.093170] gpio gpiochip5: (gpio-96-127): added GPIO chardev (254:5) Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.093475] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip5 (gpio-96-127) Jul 24 08:27:08 rfs200 user.err kernel: [ 3.093749] pinctrl-single 48002030.pinmux: Invalid number of rows: -2 Jul 24 08:27:08 rfs200 user.err kernel: [ 3.101043] pinctrl-single 48002030.pinmux: no pins entries for pinmux_gpio5_pins Jul 24 08:27:08 rfs200 user.warn kernel: [ 3.109008] omap_gpio: probe of 49056000.gpio failed with error -22 Jul 24 08:27:08 rfs200 user.err kernel: [ 3.116302] pinctrl-single 48002030.pinmux: Invalid number of rows: -2 Jul 24 08:27:08 rfs200 user.err kernel: [ 3.123260] pinctrl-single 48002030.pinmux: no pins entries for pinmux_gpio6_pins Jul 24 08:27:08 rfs200 user.warn kernel: [ 3.131195] omap_gpio: probe of 49058000.gpio failed with error -22 Jul 24 08:27:08 rfs200 user.info kernel: [ 3.142211] omap_i2c 48060000.i2c: bus 2 rev3.3 at 100 kHz Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.148620] pwm-backlight backlight: GPIO lookup for consumer enable Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.148651] pwm-backlight backlight: using device tree for GPIO lookup Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.148681] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/backlight[0]' Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.148712] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/backlight[0]' Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.148742] pwm-backlight backlight: using lookup tables for GPIO lookup Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.148773] pwm-backlight backlight: No GPIO consumer enable found Jul 24 08:27:08 rfs200 user.info kernel: [ 3.149078] pwm-backlight backlight: Linked as a consumer to regulator.2 Jul 24 08:27:08 rfs200 user.info kernel: [ 3.156646] pwm-backlight backlight: Dropping the link to regulator.2 Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.164245] panel-dpi display: GPIO lookup for consumer enable Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.164276] panel-dpi display: using device tree for GPIO lookup Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.164306] panel-dpi display: No GPIO consumer enable found Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.166198] pwm-backlight backlight: GPIO lookup for consumer enable Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.166229] pwm-backlight backlight: using device tree for GPIO lookup Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.166259] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/backlight[0]' Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.166290] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/backlight[0]' Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.166320] pwm-backlight backlight: using lookup tables for GPIO lookup Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.166320] pwm-backlight backlight: No GPIO consumer enable found Jul 24 08:27:08 rfs200 user.info kernel: [ 3.166595] pwm-backlight backlight: Linked as a consumer to regulator.2 Jul 24 08:27:08 rfs200 user.info kernel: [ 3.174804] pwm-backlight backlight: Dropping the link to regulator.2 Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.182464] panel-dpi display: GPIO lookup for consumer enable Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.182464] panel-dpi display: using device tree for GPIO lookup Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.182525] panel-dpi display: No GPIO consumer enable found Jul 24 08:27:08 rfs200 user.notice kernel: [ 3.184906] ubi0: attaching mtd4 Jul 24 08:27:08 rfs200 user.notice kernel: [ 3.715942] ubi0: scanning is finished Jul 24 08:27:08 rfs200 user.notice kernel: [ 3.731964] ubi0: attached mtd4 (name "filesystem-nand-BANK_A", size 218 MiB) Jul 24 08:27:08 rfs200 user.notice kernel: [ 3.739593] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes Jul 24 08:27:08 rfs200 user.notice kernel: [ 3.746826] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512 Jul 24 08:27:08 rfs200 user.notice kernel: [ 3.753845] ubi0: VID header offset: 512 (aligned 512), data offset: 2048 Jul 24 08:27:08 rfs200 user.notice kernel: [ 3.760986] ubi0: good PEBs: 1744, bad PEBs: 0, corrupted PEBs: 0 Jul 24 08:27:08 rfs200 user.notice kernel: [ 3.767425] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 Jul 24 08:27:08 rfs200 user.notice kernel: [ 3.775024] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 406712400 Jul 24 08:27:08 rfs200 user.notice kernel: [ 3.784515] ubi0: available PEBs: 0, total reserved PEBs: 1744, PEBs reserved for bad PEB handling: 80 Jul 24 08:27:08 rfs200 user.notice kernel: [ 3.794799] ubi0: background thread "ubi_bgt0d" started, PID 64 Jul 24 08:27:08 rfs200 user.info kernel: [ 3.801727] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2023-07-24 08:27:03 UTC (1690187223) Jul 24 08:27:08 rfs200 user.warn kernel: [ 3.811828] sr_init: No PMIC hook to init smartreflex Jul 24 08:27:08 rfs200 user.info kernel: [ 3.818145] smartreflex 480cb000.smartreflex: omap_sr_probe: SmartReflex driver initialized Jul 24 08:27:08 rfs200 user.info kernel: [ 3.827789] smartreflex 480c9000.smartreflex: omap_sr_probe: SmartReflex driver initialized Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.840606] pwm-backlight backlight: GPIO lookup for consumer enable Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.840637] pwm-backlight backlight: using device tree for GPIO lookup Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.840667] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/backlight[0]' Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.840698] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/backlight[0]' Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.840728] pwm-backlight backlight: using lookup tables for GPIO lookup Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.840728] pwm-backlight backlight: No GPIO consumer enable found Jul 24 08:27:08 rfs200 user.info kernel: [ 3.841064] pwm-backlight backlight: Linked as a consumer to regulator.2 Jul 24 08:27:08 rfs200 user.info kernel: [ 3.848541] pwm-backlight backlight: Dropping the link to regulator.2 Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.856109] panel-dpi display: GPIO lookup for consumer enable Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.856140] panel-dpi display: using device tree for GPIO lookup Jul 24 08:27:08 rfs200 user.debug kernel: [ 3.856201] panel-dpi display: No GPIO consumer enable found Jul 24 08:27:08 rfs200 user.info kernel: [ 3.859130] Waiting 2 sec before mounting root device... Jul 24 08:27:08 rfs200 user.notice kernel: [ 5.999969] UBIFS (ubi0:4): UBIFS: mounted UBI device 0, volume 4, name "rootfs", R/O mode Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.008758] UBIFS (ubi0:4): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.019195] UBIFS (ubi0:4): FS size: 212760576 bytes (202 MiB, 1649 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs) Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.030426] UBIFS (ubi0:4): reserved for root: 0 bytes (0 KiB) Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.036590] UBIFS (ubi0:4): media format: w4/r0 (latest is w5/r0), UUID E214D31D-2D4C-478E-899E-8FCB2926E238, small LPT model Jul 24 08:27:08 rfs200 user.info kernel: [ 6.050079] VFS: Mounted root (ubifs filesystem) readonly on device 0:14. Jul 24 08:27:08 rfs200 user.info kernel: [ 6.058624] devtmpfs: mounted Jul 24 08:27:08 rfs200 user.info kernel: [ 6.064788] Freeing unused kernel memory: 1024K Jul 24 08:27:08 rfs200 user.info kernel: [ 6.070404] Run /sbin/init as init process Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.594299] ubi1: attaching mtd6 Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.775451] ubi1: scanning is finished Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.787384] ubi1: attached mtd6 (name "persistent-data", size 68 MiB) Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.794250] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.801452] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512 Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.808502] ubi1: VID header offset: 512 (aligned 512), data offset: 2048 Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.815643] ubi1: good PEBs: 544, bad PEBs: 0, corrupted PEBs: 0 Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.821929] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.829528] ubi1: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 475520414 Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.839019] ubi1: available PEBs: 0, total reserved PEBs: 544, PEBs reserved for bad PEB handling: 80 Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.848815] ubi1: background thread "ubi_bgt1d" started, PID 91 Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.909545] UBIFS (ubi1:5): background thread "ubifs_bgt1_5" started, PID 94 Jul 24 08:27:08 rfs200 user.notice kernel: [ 6.928833] UBIFS (ubi1:5): recovery needed Jul 24 08:27:08 rfs200 user.notice kernel: [ 7.016693] UBIFS (ubi1:5): recovery completed Jul 24 08:27:08 rfs200 user.notice kernel: [ 7.021789] UBIFS (ubi1:5): UBIFS: mounted UBI device 1, volume 5, name "rootfs" Jul 24 08:27:08 rfs200 user.notice kernel: [ 7.029632] UBIFS (ubi1:5): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes Jul 24 08:27:08 rfs200 user.notice kernel: [ 7.040069] UBIFS (ubi1:5): FS size: 57931776 bytes (55 MiB, 449 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs) Jul 24 08:27:08 rfs200 user.notice kernel: [ 7.051025] UBIFS (ubi1:5): reserved for root: 0 bytes (0 KiB) Jul 24 08:27:08 rfs200 user.notice kernel: [ 7.057159] UBIFS (ubi1:5): media format: w4/r0 (latest is w5/r0), UUID 6799D0B7-4DA9-46FD-A8D5-E4CBEDB33E55, small LPT model Jul 24 08:27:08 rfs200 daemon.info kernel: [ 7.378479] udevd[104]: starting version 3.1.5 Jul 24 08:27:08 rfs200 user.notice kernel: [ 7.437286] random: udevd: uninitialized urandom read (16 bytes read) Jul 24 08:27:08 rfs200 user.notice kernel: [ 7.462982] random: udevd: uninitialized urandom read (16 bytes read) Jul 24 08:27:08 rfs200 user.notice kernel: [ 7.481048] random: udevd: uninitialized urandom read (16 bytes read) Jul 24 08:27:10 rfs200 user.notice kernel: [ 10.601562] random: dbus-uuidgen: uninitialized urandom read (12 bytes read) Jul 24 08:27:10 rfs200 user.notice kernel: [ 10.609985] random: dbus-uuidgen: uninitialized urandom read (8 bytes read) Jul 24 08:27:10 rfs200 user.notice kernel: [ 10.669769] random: dbus-daemon: uninitialized urandom read (12 bytes read) Jul 24 08:27:10 rfs200 user.notice kernel: [ 10.843597] ubi2: attaching mtd5 Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.382995] ubi2: scanning is finished Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.408966] ubi2: attached mtd5 (name "filesystem-nand-BANK_B", size 218 MiB) Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.416656] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.423858] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 512 Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.430938] ubi2: VID header offset: 512 (aligned 512), data offset: 2048 Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.438079] ubi2: good PEBs: 1744, bad PEBs: 0, corrupted PEBs: 0 Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.444488] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.452087] ubi2: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 572090592 Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.461578] ubi2: available PEBs: 0, total reserved PEBs: 1744, PEBs reserved for bad PEB handling: 80 Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.472229] ubi2: background thread "ubi_bgt2d" started, PID 146 Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.541229] UBIFS (ubi2:4): background thread "ubifs_bgt2_4" started, PID 149 Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.562988] UBIFS (ubi2:4): recovery needed Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.601043] UBIFS (ubi2:4): recovery completed Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.606262] UBIFS (ubi2:4): UBIFS: mounted UBI device 2, volume 4, name "rootfs" Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.614013] UBIFS (ubi2:4): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.624450] UBIFS (ubi2:4): FS size: 212760576 bytes (202 MiB, 1649 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs) Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.635681] UBIFS (ubi2:4): reserved for root: 0 bytes (0 KiB) Jul 24 08:27:11 rfs200 user.notice kernel: [ 11.641784] UBIFS (ubi2:4): media format: w4/r0 (latest is w5/r0), UUID E214D31D-2D4C-478E-899E-8FCB2926E238, small LPT model Jul 24 08:27:11 rfs200 user.notice kernel: [ 12.082763] random: dbus-daemon: uninitialized urandom read (12 bytes read) Jul 24 08:27:11 rfs200 user.notice kernel: [ 12.103881] random: dbus-daemon: uninitialized urandom read (10 bytes read) Jul 24 08:27:11 rfs200 user.notice kernel: [ 12.111968] random: dbus-daemon: uninitialized urandom read (12 bytes read) Jul 24 08:27:12 rfs200 daemon.info init: Entering runlevel: 3 Jul 24 08:27:12 rfs200 user.notice kernel: [ 13.140563] random: applauncher: uninitialized urandom read (4 bytes read) Jul 24 08:27:13 rfs200 user.debug redstripe: applauncher 13.184:Main Thread ID: 0xb6f23000 Jul 24 08:27:33 rfs200 user.debug kernel: [ 33.765686] pwm-backlight backlight: GPIO lookup for consumer enable Jul 24 08:27:33 rfs200 user.debug kernel: [ 33.765716] pwm-backlight backlight: using device tree for GPIO lookup Jul 24 08:27:33 rfs200 user.debug kernel: [ 33.765777] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/backlight[0]' Jul 24 08:27:33 rfs200 user.debug kernel: [ 33.765808] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/backlight[0]' Jul 24 08:27:33 rfs200 user.debug kernel: [ 33.765838] pwm-backlight backlight: using lookup tables for GPIO lookup Jul 24 08:27:33 rfs200 user.debug kernel: [ 33.765869] pwm-backlight backlight: No GPIO consumer enable found Jul 24 08:27:33 rfs200 user.info kernel: [ 33.766174] pwm-backlight backlight: Linked as a consumer to regulator.2 Jul 24 08:27:33 rfs200 user.info kernel: [ 33.773437] pwm-backlight backlight: Dropping the link to regulator.2 Jul 24 08:27:33 rfs200 user.debug kernel: [ 33.781097] panel-dpi display: GPIO lookup for consumer enable Jul 24 08:27:33 rfs200 user.debug kernel: [ 33.781127] panel-dpi display: using device tree for GPIO lookup Jul 24 08:27:33 rfs200 user.debug kernel: [ 33.781188] panel-dpi display: No GPIO consumer enable found Jul 24 08:27:33 rfs200 user.info kernel: [ 33.794342] platform backlight: deferred probe pending Jul 24 08:27:33 rfs200 user.info kernel: [ 33.799743] platform display: deferred probe pending Jul 24 08:27:33 rfs200 user.info kernel: [ 33.805023] platform leds: deferred probe pending Jul 24 08:27:33 rfs200 user.info kernel: [ 33.809936] platform omapdrm.0: deferred probe pending Jul 24 08:27:33 rfs200 user.info kernel: [ 33.815368] i2c 2-0048: deferred probe pending Jul 24 08:27:34 rfs200 user.info kernel: [ 34.408538] VAUX3: disabling Jul 24 08:28:09 rfs200 auth.info login[178]: root login on 'console' Jul 24 08:28:39 rfs200 user.notice kernel: [ 99.505920] random: crng init done Jul 24 08:28:39 rfs200 user.notice kernel: [ 99.512725] random: 2 urandom warning(s) missed due to ratelimiting