U-Boot SPL 2018.01 (May 27 2019 - 17:18:07) DRA752-GP ES2.0 Trying to boot from MMC1 omap_hsmmc_get_pinctrl_by_mode() --> mode : default node : 0xc38 mmc->dev:mmc@4809c000 fail to find default mode FDT_ERR_NOTFOUND no pinctrl state for default mode omap_hsmmc_get_pinctrl_by_mode() --> mode : default node : 0xe24 mmc->dev:mmc@480b4000 fail to find default mode FDT_ERR_NOTFOUND no pinctrl state for default mode *** Warning - bad CRC, using default environment U-Boot 2018.01 (May 27 2019 - 17:18:07 +0530) CPU : DRA752-GP ES2.0 Model: TI AM5728 BeagleBoard-X15 rev C Board: BeagleBoard X15 REV DRAM: 1 GiB MMC: omap_hsmmc_get_pinctrl_by_mode() --> mode : default node : 0x1001c mmc->dev:mmc@4809c000 omap_hsmmc_get_pinctrl_by_mode() --> prop_name :pinctrl-0 omap_hsmmc_get_pinctrl_by_mode() <-- omap_hsmmc_get_pinctrl_by_mode() --> mode : sdr104 node : 0x1001c mmc->dev:mmc@4809c000 omap_hsmmc_get_pinctrl_by_mode() --> prop_name :pinctrl-6 omap_hsmmc_get_pinctrl_by_mode() <-- omap_hsmmc_get_pinctrl_by_mode() --> mode : sdr50 node : 0x1001c mmc->dev:mmc@4809c000 omap_hsmmc_get_pinctrl_by_mode() --> prop_name :pinctrl-4 omap_hsmmc_get_pinctrl_by_mode() <-- omap_hsmmc_get_pinctrl_by_mode() --> mode : ddr50 node : 0x1001c mmc->dev:mmc@4809c000 omap_hsmmc_get_pinctrl_by_mode() --> prop_name :pinctrl-5 omap_hsmmc_get_pinctrl_by_mode() <-- omap_hsmmc_get_pinctrl_by_mode() --> mode : sdr25 node : 0x1001c mmc->dev:mmc@4809c000 omap_hsmmc_get_pinctrl_by_mode() --> prop_name :pinctrl-3 omap_hsmmc_get_pinctrl_by_mode() <-- omap_hsmmc_get_pinctrl_by_mode() --> mode : sdr12 node : 0x1001c mmc->dev:mmc@4809c000 omap_hsmmc_get_pinctrl_by_mode() --> prop_name :pinctrl-2 omap_hsmmc_get_pinctrl_by_mode() <-- omap_hsmmc_get_pinctrl_by_mode() --> mode : hs node : 0x1001c mmc->dev:mmc@4809c000 omap_hsmmc_get_pinctrl_by_mode() --> prop_name :pinctrl-1 omap_hsmmc_get_pinctrl_by_mode() <-- omap_hsmmc_get_pinctrl_by_mode() --> mode : default node : 0x10250 mmc->dev:mmc@480b4000 omap_hsmmc_get_pinctrl_by_mode() --> prop_name :pinctrl-0 omap_hsmmc_get_pinctrl_by_mode() <-- omap_hsmmc_get_pinctrl_by_mode() --> mode : hs node : 0x10250 mmc->dev:mmc@480b4000 omap_hsmmc_get_pinctrl_by_mode() --> prop_name :pinctrl-1 omap_hsmmc_get_pinctrl_by_mode() <-- OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - bad CRC, using default environment Net: Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 => mmc dev 1 switch to partitions #0, OK mmc1(part 0) is current device => mmcinfo Device: OMAP SD/MMC Manufacturer ID: 9d OEM: 101 Name: IS004 Bus Speed: 48000000 Mode : MMC High Speed (52MHz) Rd Block Len: 512 MMC version 5.0 High Capacity: Yes Capacity: 3.6 GiB Bus Width: 1-bit Erase Group Size: 512 KiB HC WP Group Size: 8 MiB User Capacity: 3.6 GiB WRREL Boot Capacity: 2 MiB ENH RPMB Capacity: 512 KiB ENH => => boot switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 ** Unable to read file boot.scr ** 698 bytes read in 6 ms (113.3 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3650048 bytes read in 190 ms (18.3 MiB/s) 98385 bytes read in 37 ms (2.5 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe4000, end 8ffff050 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.79-gbde58ab01e (jigar@jigar) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017. 11)) #3 SMP PREEMPT Fri May 24 12:16:06 IST 2019 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: TI AM5728 BeagleBoard-X15 rev C [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node dsp2-memory@9f000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] percpu: Embedded 15 pages/cpu @ef636000 s31308 r8192 d21940 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 259648 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=PARTUUID=15c254dc-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 831200K/1045504K available (8192K kernel code, 339K rwdata, 2320K rodata, 2048K init, 280 K bss, 25888K reserved, 188416K cma-reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB) [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB) [ 0.000000] .data : 0xc1000000 - 0xc1054fd8 ( 340 kB) [ 0.000000] .bss : 0xc1056000 - 0xc109c2e0 ( 281 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] arch_timer: cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 44079 5202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000017] Switching to timer-based delay loop, resolution 162ns [ 0.000351] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000360] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000804] Console: colour dummy device 80x30 [ 0.000823] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.000831] This ensures that you still see kernel messages. Please [ 0.000838] update your kernel commandline. [ 0.000860] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61 475) [ 0.000876] pid_max: default: 32768 minimum: 301 [ 0.000994] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001010] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001567] CPU: Testing write buffer coherency: ok [ 0.001607] CPU0: Spectre v2: using ICIALLU workaround [ 0.001820] /cpus/cpu@0 missing clock-frequency property [ 0.001837] /cpus/cpu@1 missing clock-frequency property [ 0.001849] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.039877] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.059882] Hierarchical SRCU implementation. [ 0.080072] EFI services will not be available. [ 0.099938] smp: Bringing up secondary CPUs ... [ 0.170224] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.170229] CPU1: Spectre v2: using ICIALLU workaround [ 0.170329] smp: Brought up 1 node, 2 CPUs [ 0.170341] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.170349] CPU: All CPU(s) started in HYP mode. [ 0.170356] CPU: Virtualization extensions available. [ 0.170845] devtmpfs: initialized [ 0.188235] random: get_random_u32 called from bucket_table_alloc+0x108/0x230 with crng_init=0 [ 0.188498] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.188701] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.188719] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.192793] pinctrl core: initialized pinctrl subsystem [ 0.193259] DMI not present or invalid. [ 0.193526] NET: Registered protocol family 16 [ 0.194597] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.195516] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.392905] cpuidle: using governor ladder [ 0.392939] cpuidle: using governor menu [ 0.400455] OMAP GPIO hardware version 0.1 [ 0.427010] No ATAGs? [ 0.427085] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.427099] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.427448] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.427459] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.427989] OMAP DMA hardware revision 0.0 [ 0.437353] edma 43300000.edma: memcpy is disabled [ 0.440691] edma 43300000.edma: TI EDMA DMA engine driver [ 0.447550] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.448292] evm_5v0: supplied by main_12v0 [ 0.451536] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.451738] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.451988] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.452244] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.452586] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.452787] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.453027] iommu: Adding device 58820000.ipu to group 1 [ 0.453110] iommu: Adding device 55020000.ipu to group 2 [ 0.453263] iommu: Adding device 40800000.dsp to group 0 [ 0.453515] iommu: Adding device 41000000.dsp to group 3 [ 0.455696] palmas 0-0058: Irq flag is 0x00000008 [ 0.482952] palmas 0-0058: Muxing GPIO 2b, PWM 0, LED 0 [ 0.484582] SMPS12: supplied by regulator-dummy [ 0.486422] SMPS3: supplied by regulator-dummy [ 0.488293] SMPS45: supplied by regulator-dummy [ 0.490320] SMPS6: supplied by regulator-dummy [ 0.491889] SMPS7: supplied by regulator-dummy [ 0.493440] SMPS8: supplied by regulator-dummy [ 0.494829] SMPS9: supplied by regulator-dummy [ 0.495597] LDO1: supplied by regulator-dummy [ 0.501338] LDO2: supplied by regulator-dummy [ 0.501456] random: fast init done [ 0.511186] LDO3: supplied by regulator-dummy [ 0.521221] LDO4: supplied by regulator-dummy [ 0.531233] LDO5: supplied by regulator-dummy [ 0.532003] LDO6: supplied by regulator-dummy [ 0.532781] LDO7: supplied by regulator-dummy [ 0.533564] LDO8: supplied by regulator-dummy [ 0.534333] LDO9: supplied by regulator-dummy [ 0.541271] LDOLN: supplied by regulator-dummy [ 0.551272] LDOUSB: supplied by regulator-dummy [ 0.563876] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.564126] pps_core: LinuxPPS API ver. 1 registered [ 0.564135] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.564155] PTP clock support registered [ 0.564184] EDAC MC: Ver: 3.0.0 [ 0.570674] dmi: Firmware registration failed. [ 0.571065] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.571350] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.571683] Advanced Linux Sound Architecture Driver Initialized. [ 0.572365] clocksource: Switched to clocksource arch_sys_counter [ 0.579725] NET: Registered protocol family 2 [ 0.580257] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.580322] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.580449] TCP: Hash tables configured (established 8192 bind 8192) [ 0.580538] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.580571] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.580719] NET: Registered protocol family 1 [ 0.581058] RPC: Registered named UNIX socket transport module. [ 0.581068] RPC: Registered udp transport module. [ 0.581076] RPC: Registered tcp transport module. [ 0.581083] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.581782] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.581959] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.583034] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.587191] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.587698] NFS: Registering the id_resolver key type [ 0.587723] Key type id_resolver registered [ 0.587731] Key type id_legacy registered [ 0.587769] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.589090] bounce: pool size: 64 pages [ 0.589133] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.589144] io scheduler noop registered [ 0.589153] io scheduler deadline registered [ 0.589247] io scheduler cfq registered (default) [ 0.589257] io scheduler mq-deadline registered [ 0.589265] io scheduler kyber registered [ 0.593579] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.598555] vdd_3v3: supplied by regen1 [ 0.598823] aic_dvdd_fixed: supplied by vdd_3v3 [ 0.598910] vtt_fixed: supplied by smps3 [ 0.601240] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.603398] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 43, base_baud = 3000000) is a 8250 [ 1.581946] console [ttyS2] enabled [ 1.587224] omap_rng 48090000.rng: Random Number Generator ver. 20 [ 1.594314] DSS: OMAP DSS rev 6.1 [ 1.599217] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 1.607625] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 1.616707] tpd12s015: probe of encoder failed with error -2 [ 1.623089] connector-hdmi connector: failed to find video source [ 1.639130] brd: module loaded [ 1.647832] loop: module loaded [ 1.652220] libphy: Fixed MDIO Bus: probed [ 1.712394] davinci_mdio 48485000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 1.720088] libphy: 48485000.mdio: probed [ 1.726384] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 1.736630] cpsw 48484000.ethernet: Detected MACID = 10:ce:a9:bc:1b:e2 [ 1.743270] cpsw 48484000.ethernet: initialized cpsw ale version 1.4 [ 1.749654] cpsw 48484000.ethernet: ALE Table size 1024 [ 1.754932] cpsw 48484000.ethernet: device node lookup for pps timer failed [ 1.761959] cpsw 48484000.ethernet: cpts: overflow check period 500 (jiffies) [ 1.770812] rtc-pcf85263 0-0051: Oscillator stop detected, date/time is not reliable. [ 1.779055] rtc-pcf85263 0-0051: No century in NVRAM - assume 2000 [ 1.786551] rtc-pcf85263 0-0051: Oscillator stop detected, date/time is not reliable. [ 1.794593] rtc-pcf85263 0-0051: rtc core: registered rtc-pcf85263 as rtc0 [ 1.801501] rtc-pcf85263 0-0051: PCF85263 RTC (irqpin=INTB irq=168) [ 1.807883] i2c /dev entries driver [ 1.812052] IR NEC protocol handler initialized [ 1.816624] IR RC5(x/sz) protocol handler initialized [ 1.821696] IR RC6 protocol handler initialized [ 1.826753] IR JVC protocol handler initialized [ 1.831301] IR Sony protocol handler initialized [ 1.835953] IR SANYO protocol handler initialized [ 1.840675] IR Sharp protocol handler initialized [ 1.845415] IR MCE Keyboard/mouse protocol handler initialized [ 1.851271] IR XMP protocol handler initialized [ 1.858268] gpio-fan gpio_fan: GPIO fan initialized [ 1.864361] tmp102 0-0048: initialized [ 1.873212] sdhci: Secure Digital Host Controller Interface driver [ 1.879415] sdhci: Copyright(c) Pierre Ossman [ 1.884141] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.891351] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_1_8v mode [ 1.898015] sdhci-omap 4809c000.mmc: no pinctrl state for hs200_1_8v mode [ 1.962402] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA [ 2.010014] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.020142] mmc0: new high speed SDHC card at address 0001 [ 2.025863] mmcblk0: mmc0:0001 SD 3.72 GiB [ 2.031203] mmcblk0: p1 p2 [ 2.032382] mmc1: SDHCI controller on 480b4000.mmc [480b4000.mmc] using ADMA [ 2.034057] ledtrig-cpu: registered to indicate activity on CPUs [ 2.045104] NET: Registered protocol family 10 [ 2.055620] Segment Routing with IPv6 [ 2.059329] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.067661] NET: Registered protocol family 17 [ 2.072262] Key type dns_resolver registered [ 2.076652] omap_voltage_late_init: Voltage driver support not added [ 2.083041] Power Management for TI OMAP4+ devices. [ 2.088133] Registering SWP/SWPB emulation handler [ 2.101333] dmm 4e000000.dmm: workaround for errata i878 in use [ 2.108679] dmm 4e000000.dmm: initialized all PAT entries [ 2.114748] connector-hdmi connector: failed to find video source [ 2.122163] asoc-simple-card sound0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok [ 2.129935] asoc-simple-card sound0: ASoC: no DMI vendor name! [ 2.137028] mmc1: switch to bus width 8 failed [ 2.141545] connector-hdmi connector: failed to find video source [ 2.148295] rtc-pcf85263 0-0051: Oscillator stop detected, date/time is not reliable. [ 2.156186] mmc1: switch to bus width 4 failed [ 2.160686] rtc-pcf85263 0-0051: hctosys: unable to read the hardware clock [ 2.167897] mmc1: new high speed MMC card at address 0001 [ 2.173626] mmcblk1: mmc1:0001 IS004G 3.64 GiB [ 2.173705] aic_dvdd_fixed: disabling [ 2.181961] ldousb: disabling [ 2.185007] mmcblk1boot0: mmc1:0001 IS004G partition 1 2.00 MiB [ 2.191090] mmcblk1boot1: mmc1:0001 IS004G partition 2 2.00 MiB [ 2.197072] ALSA device list: [ 2.197170] mmcblk1rpmb: mmc1:0001 IS004G partition 3 512 KiB [ 2.205866] #0: BeagleBoard-X15 [ 2.209273] mmcblk1: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 2.317556] mmc1: switch to bus width 8 failed [ 2.323509] mmc1: switch to bus width 4 failed [ 2.329025] mmcblk1: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 2.338469] mmcblk1: retrying using single block read [ 2.343693] mmcblk1: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 2.352962] print_req_error: I/O error, dev mmcblk1, sector 0 [ 2.358876] mmcblk1: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 2.368143] print_req_error: I/O error, dev mmcblk1, sector 1 [ 2.374821] mmcblk1: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 2.384310] print_req_error: I/O error, dev mmcblk1, sector 2 [ 2.390223] mmcblk1: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 2.399491] print_req_error: I/O error, dev mmcblk1, sector 3 [ 2.405413] mmcblk1: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 2.414682] print_req_error: I/O error, dev mmcblk1, sector 4 [ 2.420593] mmcblk1: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 2.429861] print_req_error: I/O error, dev mmcblk1, sector 5 [ 2.435782] mmcblk1: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 2.445047] print_req_error: I/O error, dev mmcblk1, sector 6 [ 2.450959] mmcblk1: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 2.460228] print_req_error: I/O error, dev mmcblk1, sector 7 [ 2.466005] Buffer I/O error on dev mmcblk1, logical block 0, async page read [ 2.473392] mmcblk1: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 2.482834] mmcblk1: retrying using single block read [ 2.488047] mmcblk1: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0x0 [ 2.497317] print_req_error: I/O error, dev mmcblk1, sector 0 [ 2.503239] mmcblk1: error -84 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0 [ 2.512510] print_req_error: I/O error, dev mmcblk1, sector 1 [ 2.518422] mmcblk1: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 2.527839] mmcblk1: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 2.537257] mmcblk1: error -84 transferring data, sector 4, nr 4, cmd response 0x900, card status 0x0 [ 2.546670] mmcblk1: error -84 transferring data, sector 5, nr 3, cmd response 0x900, card status 0x0 [ 2.556084] mmcblk1: error -84 transferring data, sector 6, nr 2, cmd response 0x900, card status 0x0 [ 2.565497] mmcblk1: error -84 transferring data, sector 7, nr 1, cmd response 0x900, card status 0x0 [ 2.574767] Buffer I/O error on dev mmcblk1, logical block 0, async page read [ 2.581942] mmcblk1: unable to read partition table [ 2.588175] connector-hdmi connector: failed to find video source [ 2.603337] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.611483] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 2.623190] devtmpfs: mounted [ 2.627078] Freeing unused kernel memory: 2048K [ 3.065051] systemd[1]: System time before build time, advancing clock. [ 3.123226] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSV INIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hiera rchy=hybrid) [ 3.144296] systemd[1]: Detected architecture arm. Welcome to Arago 2018.10! [ 3.183799] systemd[1]: Set hostname to . [ 3.633218] random: systemd: uninitialized urandom read (16 bytes read) [ 3.639934] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 3.672464] random: systemd: uninitialized urandom read (16 bytes read) [ 3.679243] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 3.767911] random: systemd: uninitialized urandom read (16 bytes read) [ 3.774681] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 3.802608] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 3.832506] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 3.862453] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 3.893615] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ OK ] Listening on Network Service Netlink Socket. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Reached target Swap. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on Process Core Dump Socket. [ OK ] Created slice System Slice. Starting Load Kernel Modules... [ 4.189688] cryptodev: loading out-of-tree module taints kernel. [ OK ] Created slice system-getty.slice. [ 4.197002] cryptodev: driver 1.9 loaded. Starting Create list of required st…ce nodes for the current kernel... Mounting Temporary Directory (/tmp)... [ OK ] Created slice system-serial\x2dgetty.slice. Starting Journal Service... [ OK ] Started Boot Process Profiler. Starting Remount Root and Kernel File Systems... Mounting Kernel Debug File System... [ 4.422037] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ OK ] Reached target Slices. Mounting POSIX Message Queue File System... [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Journal Service. [ OK ] Started Load Kernel Modules. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Create Static Device Nodes in /dev... Mounting Kernel Configuration File System... Starting Apply Kernel Variables... Starting Flush Journal to Persistent Storage... [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ 4.969449] systemd-journald[84]: Received request to flush runtime journal from PID 1 Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Mounting /media/ram... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Coldplug all Devices. Starting Load/Save Random Seed... [ 5.306313] omap-rproc 58820000.ipu: assigned reserved memory node ipu1-memory@9d000000 [ OK ] Reached target Local File Systems. [ 5.317939] remoteproc remoteproc0: 58820000.ipu is available Starting Create Volatile Files and Directories... [ 5.347574] connector-hdmi connector: failed to find video source [ 5.359551] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2 [ 5.359560] remoteproc remoteproc0: powering up 58820000.ipu [ 5.359583] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2 [ 5.359588] remoteproc remoteproc0: request_firmware failed: -2 [ 5.362150] omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000 [ 5.362210] remoteproc remoteproc1: 55020000.ipu is available [ 5.362466] omap-rproc 40800000.dsp: assigned reserved memory node dsp1-memory@99000000 [ 5.362518] remoteproc remoteproc2: 40800000.dsp is available [ 5.362806] omap-rproc 41000000.dsp: assigned reserved memory node dsp2-memory@9f000000 [ 5.362858] remoteproc remoteproc3: 41000000.dsp is available [ 5.478846] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 5.518897] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659038@5 8:tps659038_rtc as rtc1 [ 5.583488] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 5.594441] omap-des 480a5000.des: will run requests pump with realtime priority [ 5.645851] mmcblk1: error -84 transferring data, sector 7634816, nr 8, cmd response 0x900, card status 0xb00 [ 5.645858] mmcblk1: retrying using single block read [ 5.646548] mmcblk1: error -84 transferring data, sector 7634816, nr 8, cmd response 0x900, card status 0x0 [ 5.646736] mmcblk1: error -84 transferring data, sector 7634817, nr 7, cmd response 0x900, card status 0x0 [ 5.646902] mmcblk1: error -84 transferring data, sector 7634818, nr 6, cmd response 0x900, card status 0x0 [ 5.647082] mmcblk1: error -84 transferring data, sector 7634819, nr 5, cmd response 0x900, card status 0x0 [ 5.647266] mmcblk1: error -84 transferring data, sector 7634820, nr 4, cmd response 0x900, card status 0x0 [ 5.647434] mmcblk1: error -84 transferring data, sector 7634821, nr 3, cmd response 0x900, card status 0x0 [ 5.647599] mmcblk1: error -84 transferring data, sector 7634822, nr 2, cmd response 0x900, card status 0x0 [ 5.647787] mmcblk1: error -84 transferring data, sector 7634823, nr 1, cmd response 0x900, card status 0x0 [ 5.654571] mmcblk1: error -84 transferring data, sector 7634816, nr 8, cmd response 0x900, card status 0xb00 [ 5.654578] mmcblk1: retrying using single block read [ 5.654739] mmcblk1: error -84 transferring data, sector 7634816, nr 8, cmd response 0x900, card status 0x0 [ 5.655026] mmcblk1: error -84 transferring data, sector 7634817, nr 7, cmd response 0x900, card status 0x0 [ 5.655827] mmcblk1: error -84 transferring data, sector 7634818, nr 6, cmd response 0x900, card status 0x0 [ 5.656014] mmcblk1: error -84 transferring data, sector 7634819, nr 5, cmd response 0x900, card status 0x0 [ 5.656167] mmcblk1: error -84 transferring data, sector 7634820, nr 4, cmd response 0x900, card status 0x0 [ 5.656322] mmcblk1: error -84 transferring data, sector 7634821, nr 3, cmd response 0x900, card status 0x0 [ 5.656529] mmcblk1: error -84 transferring data, sector 7634822, nr 2, cmd response 0x900, card status 0x0 [ 5.657391] mmcblk1: error -84 transferring data, sector 7634823, nr 1, cmd response 0x900, card status 0x0 [ 5.657402] Buffer I/O error on dev mmcblk1, logical block 954352, async page read [ 5.663046] omap_rtc 48838000.rtc: registered as rtc2 [ 5.900326] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 5.936526] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 5.986004] mmcblk1boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb 00 [ 6.068410] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 6.078105] omap-aes 4b500000.aes: will run requests pump with realtime priority [ 6.083080] mmc1: switch to bus width 8 failed [ 6.084632] mmc1: switch to bus width 4 failed [ 6.087843] mmcblk1boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb 00 [ 6.087849] mmcblk1boot0: retrying using single block read [ 6.088037] mmcblk1boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 6.088218] mmcblk1boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 6.088424] mmcblk1boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 6.088601] mmcblk1boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 6.088807] mmcblk1boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 6.088980] mmcblk1boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 6.089185] mmcblk1boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 6.092538] mmcblk1boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 6.094665] mmcblk1boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb 00 [ 6.155079] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 6.158669] omap-aes 4b700000.aes: will run requests pump with realtime priority [ 6.176675] [drm] Initialized pvr 1.14.3699939 20110701 for 56000000.gpu on minor 0 [ 6.190102] mmc1: switch to bus width 8 failed [ 6.192890] mmc1: switch to bus width 4 failed [ 6.194987] mmcblk1boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb 00 [ 6.194992] mmcblk1boot1: retrying using single block read [ 6.195179] mmcblk1boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 6.195390] mmcblk1boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 6.196773] mmcblk1boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 6.197006] mmcblk1boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 6.197932] mmcblk1boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 6.198129] mmcblk1boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 6.198315] mmcblk1boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 6.198510] mmcblk1boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 6.200067] mmcblk1boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb 00 [ 6.200072] mmcblk1boot0: retrying using single block read [ 6.200283] mmcblk1boot0: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 6.200462] mmcblk1boot0: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 6.200638] mmcblk1boot0: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 6.200855] mmcblk1boot0: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 6.201030] mmcblk1boot0: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 6.201202] mmcblk1boot0: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 6.201376] mmcblk1boot0: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 6.201557] mmcblk1boot0: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 6.201565] Buffer I/O error on dev mmcblk1boot0, logical block 496, async page read [ 6.214143] mmcblk1boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0xb 00 [ 6.214151] mmcblk1boot1: retrying using single block read [ 6.214356] mmcblk1boot1: error -84 transferring data, sector 3968, nr 8, cmd response 0x900, card status 0x0 [ 6.214543] mmcblk1boot1: error -84 transferring data, sector 3969, nr 7, cmd response 0x900, card status 0x0 [ 6.214733] mmcblk1boot1: error -84 transferring data, sector 3970, nr 6, cmd response 0x900, card status 0x0 [ 6.214939] mmcblk1boot1: error -84 transferring data, sector 3971, nr 5, cmd response 0x900, card status 0x0 [ 6.215141] mmcblk1boot1: error -84 transferring data, sector 3972, nr 4, cmd response 0x900, card status 0x0 [ 6.215344] mmcblk1boot1: error -84 transferring data, sector 3973, nr 3, cmd response 0x900, card status 0x0 [ 6.215541] mmcblk1boot1: error -84 transferring data, sector 3974, nr 2, cmd response 0x900, card status 0x0 [ 6.215731] mmcblk1boot1: error -84 transferring data, sector 3975, nr 1, cmd response 0x900, card status 0x0 [ 6.215740] Buffer I/O error on dev mmcblk1boot1, logical block 496, async page read [ 6.801229] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 6.948043] pruss 4b200000.pruss: creating PRU cores and other child platform devices [ 6.950108] pruss 4b280000.pruss: creating PRU cores and other child platform devices [ 6.993015] remoteproc remoteproc4: 4b234000.pru is available [ 6.993079] pru-rproc 4b234000.pru: PRU rproc node /ocp/pruss_soc_bus@4b226004/pruss@0/pru@34000 probed succe ssfully [ 6.993394] remoteproc remoteproc5: 4b238000.pru is available [ 6.993448] pru-rproc 4b238000.pru: PRU rproc node /ocp/pruss_soc_bus@4b226004/pruss@0/pru@38000 probed succe ssfully [ 6.993748] remoteproc remoteproc6: 4b2b4000.pru is available [ 6.993786] pru-rproc 4b2b4000.pru: PRU rproc node /ocp/pruss_soc_bus@4b2a6004/pruss@0/pru@34000 probed succe ssfully [ 6.994018] remoteproc remoteproc7: 4b2b8000.pru is available [ 6.994059] pru-rproc 4b2b8000.pru: PRU rproc node /ocp/pruss_soc_bus@4b2a6004/pruss@0/pru@38000 probed succe ssfully [ OK ] Started Load/Save Random Seed. [ 7.391058] connector-hdmi connector: failed to find video source [ 7.401293] remoteproc remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2 [ 7.410401] remoteproc remoteproc1: powering up 55020000.ipu [[ 7.417783] remoteproc remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2 OK ] Started Create Volatile Files and Directories[ 7.426939] remoteproc remoteproc1: request_firmware fai led: -2 . [ 7.438498] remoteproc remoteproc2: Direct firmware load for dra7-dsp1-fw.xe66 failed with error -2 [ 7.447774] remoteproc remoteproc2: powering up 40800000.dsp [ 7.453648] remoteproc remoteproc2: Direct firmware load for dra7-dsp1-fw.xe66 failed with error -2 [ 7.469403] remoteproc remoteproc2: request_firmware failed: -2 [ 7.469443] remoteproc remoteproc3: Direct firmware load for dra7-dsp2-fw.xe66 failed with error -2 [ 7.469449] remoteproc remoteproc3: powering up 41000000.dsp [ 7.469469] remoteproc remoteproc3: Direct firmware load for dra7-dsp2-fw.xe66 failed with error -2 [ 7.469474] remoteproc remoteproc3: request_firmware failed: -2 [ OK ] Found device /dev/ttyS2. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Reached target Sound Card. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Reached target System Initialization. Starting Network Service... [ OK ] Started Daily rotation of log files. Starting sshd.socket. [ 8.125374] net eth0: initializing cpsw version 1.15 (0) [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ 8.253223] Micrel KSZ9031 Gigabit PHY 48485000.mdio:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mi i_bus:phy_addr=48485000.mdio:01, irq=POLL) [ OK ] Started Network Service. [ 8.275766] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Listening on sshd.socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started Periodic Command Scheduler. Starting RPC Bind Service... Starting rc.pvr.service... Starting Login Service... [ OK ] Started Kernel Logging Service. [ OK ] Started Hardware RNG Entropy Gatherer Daemon. [ 8.563264] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ OK ] Started Job spooling tools. [ 8.613036] random: crng init done [[ 8.617991] random: 7 urandom warning(s) missed due to ratelimiting OK ] Reached target Containers. [ OK ] Started D-Bus System Message Bus. [ OK ] Started System Logging Service. Starting Print notice about GPLv3 packages... Starting Save/Restore Sound Card State... Starting TI IPC Daemon... [ OK ] Reached target Network. Starting Permit User Sessions... Starting Network Name Resolution... [ OK ] Started RPC Bind Service. [ OK ] Started rc.pvr.service. [ OK ] Started TI IPC Daemon. [ OK ] Started Permit User Sessions. [ OK ] Started Login Service. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... Starting telnetd.service... [ OK ] Started Save/Restore Sound Card State. [ OK ] Started Synchronize System and HW clocks. [ OK ] Started telnetd.service. Starting thttpd.service... [ OK ] Started thttpd.service. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started NFS status monitor for NFSv2/3 locking.. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: bash binutils cifs-utils cpio dosfstools [ 10.401249] cpsw 48484000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx gawk gdbserver gzip libdw1 libelf1 libreadline7 m4[ 10.411465] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ OK ] Reached target Multi-User System. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am57xx-evm ttyS2 Arago 2018.10 am57xx-evm ttyS2 am57xx-evm login: root