pbotev@lin-0306:~/ti-processor-sdk-linux-am65xx-evm-05.03.00.07/bin$ sudo ./create-sdcard.sh ################################################################################ This script will create a bootable SD card from custom or pre-built binaries. The script must be run with root permissions and from the bin directory of the SDK Example: $ sudo ./create-sdcard.sh Formatting can be skipped if the SD card is already formatted and partitioned properly. ################################################################################ Available Drives to write images to: # major minor size name 1: 8 0 488386584 sda 2: 8 16 7761920 sdb Enter Device Number or n to exit: 2 sdb was selected /dev/sdb is an sdx device Unmounting the sdb drives unmounted /dev/sdb1 unmounted /dev/sdb2 Current size of sdb1 71680 bytes Current size of sdb2 7672832 bytes ################################################################################ Select 2 partitions if only need boot and rootfs (most users). Select 3 partitions if need SDK & other content on SD card. This is usually used by device manufacturers with access to partition tarballs. ****WARNING**** continuing will erase all data on sdb ################################################################################ Number of partitions needed [2/3] : 2 Now partitioning sdb with 2 partitions... ################################################################################ Now making 2 partitions ################################################################################ 1024+0 records in 1024+0 records out 1048576 bytes (1.0 MB, 1.0 MiB) copied, 0.25297 s, 4.1 MB/s DISK SIZE - 7948206080 bytes ################################################################################ Partitioning Boot ################################################################################ mkfs.fat 3.0.28 (2015-05-16) mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows /dev/sdb1: No such file or directory ################################################################################ Partitioning rootfs ################################################################################ mke2fs 1.42.13 (17-May-2015) /dev/sdb2 contains a ext3 file system labelled 'rootfs' last mounted on Tue May 14 10:35:16 2019 Proceed anyway? (y,n) y Creating filesystem with 1918208 4k blocks and 479552 inodes Filesystem UUID: 70f1731d-060b-4d6c-abaa-0da1413e4434 Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632 Allocating group tables: done Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done ################################################################################ Partitioning is now done Continue to install filesystem or select 'n' to safe exit **Warning** Continuing will erase files any files in the partitions ################################################################################ Would you like to continue? [y/n] : y Mount the partitions Emptying partitions Syncing.... ################################################################################ Choose file path to install from 1 ) Install pre-built images from SDK 2 ) Enter in custom boot and rootfs file paths ################################################################################ Choose now [1/2] : 1 Will now install from SDK pre-built images now installing: ti-processor-sdk-linux-am65xx-evm-05.03.00.07 ################################################################################ Multiple rootfs Tarballs found ################################################################################ 1:tisdk-docker-rootfs-image-am65xx-evm.tar.xz 2:tisdk-rootfs-image-am65xx-evm.tar.xz Enter Number of rootfs Tarball: 1 ################################################################################ Copying files now... will take minutes ################################################################################ Copying boot partition tispl.bin copied tiboot3.bin copied sysfw.itb copied u-boot.img copied uEnv.txt copied Copying rootfs System partition Syncing... Un-mount the partitions Remove created temp directories Operation Finished