U-Boot SPL 2014.07 (Jun 08 2017 - 18:57:28) DRA752-GP ES2.0 before do_io_settings before prcm_init |-before enable_basic_clocks Enable clock domain - 4a009700 Enable clock domain - 4a009300 Enable clock domain - 4a008b00 Enable clock domain - 4a008d00 Enable clock domain - 4a0093c0 Enable clock domain - 4a008700 Enable clock module - 4a008728 Enable clock module - 4a008b30 Enable clock module - 4a008b38 Enable clock module - 4a008d20 Enable clock module - 4ae07838 Enable clock module - 4a009760 Enable clock module - 4a009768 Enable clock module - 4a009770 Enable clock module - 4a009778 Enable clock module - 4a009780 Enable clock module - 4a009810 Enable clock module - 4a009818 Enable clock module - 4a008778 Enable clock module - 4a008780 Enable clock module - 4ae07840 Enable clock module - 4a009328 Enable clock module - 4a009330 Enable clock module - 4a009738 Enable clock module - 4ae07830 Enable clock module - 4a009850 Enable clock module - 4a0097a0 Enable clock module - 4a0093d0 Enable clock module - 4a009838 Enable clock domain - 4a009700 Enable clock domain - 4a009300 Enable clock domain - 4a008b00 Enable clock domain - 4a008d00 Enable clock domain - 4a0093c0 Enable clock domain - 4a008700 |-before timer_init |-before scale_vcores |-before vcores->core optimize_vcore_voltage:efuse 0x4a0025f4 bits=16 Vnom=1030, using efuse value 1020 |-before core do_scale_vcore: volt - 1020 offset_code - 0x3a |-before recalibrate_iodelay |-before __recalibrate_iodelay |-before calibrate_iodelay |-before isolate_io |- isolate = 1 |- wait_on_value1 |- wait_on_value11C…BBBBB¾Kwait_on_value12 |- wait_on_value13 |- wait_on_value2 IODELAY: IO delay recalibration successfully completed |-before vcores->mpu optimize_vcore_voltage:efuse 0x4a003b20 bits=16 Vnom=1090, using efuse value 975 |-before mpu do_scale_vcore: volt - 975 offset_code - 0x36 |-before abb_setup |-before mm |-before mm |-before gpu optimize_vcore_voltage:efuse 0x4a003b10 bits=16 Vnom=1250, using efuse value 1060 |-before gpu do_scale_vcore: volt - 1060 offset_code - 0x3e |-before eve optimize_vcore_voltage:efuse 0x4a0025e0 bits=16 Vnom=1060, using efuse value 965 |-before eve do_scale_vcore: volt - 965 offset_code - 0x35 |-before iva optimize_vcore_voltage:efuse 0x4a0025cc bits=16 Vnom=1060, using efuse value 970 |-before iva do_scale_vcore: volt - 970 offset_code - 0x35 |-before setup_dplls setup_dplls core Dpll locked, but not for ideal M = 266,N = 4 values, current values are M = 532,N= 9 before core[4a005120] Dpll wait_for_lock Core DPLL configured per Dpll locked, but not for ideal M = 96,N = 4 values, current values are M = 1920,N= À§NC…before per[4a008140] Dpll wait_for_lock PER DPLL locked mpu Dpll locked, but not for ideal M = 500,N = 9 values, current values are M = 1470,N= 24 before mpu[4a005160] Dpll wait_for_lock MPU DPLL locked before usb[4a008180] Dpll wait_for_lock before ddr[4a005210] Dpll wait_for_lock before gmac[4a0052a8] Dpll wait_for_lock |-before setup_warmreset_time before board_early_init_f before sdram_init >>sdram_init() in_sdram = 0 >>do_sdram_init() 4c000000 <>do_sdram_init() 4d000000 <:{28} [board_init_r];:{287} spl_mmc_load_image [spl_mmc_load_image];:{346} [spl_mmc_load_image];:{348} [fs/fat/fat.c];<1267>;{file_fat_read} [fs/fat/fat.c];<1260>;{file_fat_read_at} reading dra7-evm.dtb [fs/fat/fat.c];<1172>;{do_fat_read_at};ret=-1 spl_load_image_fat_os: error reading image dra7-evm.dtb, err - -1 [spl_mmc_load_image];:{365} [fs/fat/fat.c];<1267>;{file_fat_read} [fs/fat/fat.c];<1260>;{file_fat_read_at} reading u-boot.img [fs/fat/fat.c];<1172>;{do_fat_read_at};ret=64 [fs/fat/fat.c];<1267>;{file_fat_read} [fs/fat/fat.c];<1260>;{file_fat_read_at} reading u-boot.img [fs/fat/fat.c];<1172>;{do_fat_read_at};ret=373024 [spl_mmc_load_image];:{369} [board_init_r];:{289} entry point = 0x8080000, the value =  [board_init_r];:{416} [jump_to_image_no_args];:{168} [jump_to_image_no_args];:{171} [jump_to_image_no_args];:{174} U-Boot 2014.07 (Dec 08 2016 - 15:53:31) CPU : DRA752-GP ES2.0 Board: DRA7xx I2C: ready DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1, OMAP SD/MMC: 2 Using default environment serial# not set, setting... Target spinup took 0 ms. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... timeout exit! Found 0 device(s). SCSI: Net: cpsw Hit any key to stop autoboot: 1  0 J6 ... Card did not respond to voltage select! Card did not respond to voltage select! switch to partitions #0, OK mmc1(part 0) is current device SD/MMC found on device 1 reading j6_uenv.txt 195 bytes read in 3 ms (63.5 KiB/s) Loaded environment from j6_uenv.txt Importing environment from mmc1 ... 5178640 bytes read in 125 ms (39.5 MiB/s) 101736 bytes read in 9 ms (10.8 MiB/s) Booting from mmc1 ... Kernel image @ 0x82000000 [ 0x000000 - 0x4f0510 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe4000, end 8ffffd67 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.67-gb3b170c-dirty (andy@andy-Veriton-M490) (gcc version 4.7.3 20130226 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.03-20130313 - Linaro GCC 2013.03) ) #2 SMP PREEMPT Wed Nov 30 21:05:59 CST 2016 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 20161111 [ 0.000000] Reserved memory: created CMA memory pool at 0x95800000, size 56 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x99000000, size 64 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x9d000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x9f000000, size 8 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] cma: CMA: reserved 64 MiB at ab800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 8 pages/cpu @ea761000 s8640 r8192 d15936 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517136 [ 0.000000] Kernel command line: console=ttyO2,115200n8 elevator=noop root=/dev/mmcblk2p2 rw rootwait earlyprintk fixrtc omapdrm.num_crtc=2 consoleblank=0 cma=64M rootfstype=ext4 snd.slots_reserved=1,1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1816504K/2074624K available (6799K kernel code, 692K rwdata, 2684K rodata, 376K init, 267K bss, 258120K reserved, 1300480K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc094b0d4 (9485 kB) [ 0.000000] .init : 0xc094c000 - 0xc09aa1c0 ( 377 kB) [ 0.000000] .data : 0xc09ac000 - 0xc0a59260 ( 693 kB) [ 0.000000] .bss : 0xc0a5926c - 0xc0a9bf7c ( 268 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000457] Architected cp15 timer(s) running at 6.14MHz (virt). [ 0.000462] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 2794592043008ns [ 0.000471] Switching to timer-based delay loop [ 0.001517] Console: colour dummy device 80x30 [ 0.001535] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.001542] This ensures that you still see kernel messages. Please [ 0.001548] update your kernel commandline. [ 0.001563] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.001576] pid_max: default: 32768 minimum: 301 [ 0.001685] Security Framework initialized [ 0.001738] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001749] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.025511] CPU: Testing write buffer coherency: ok [ 0.025763] /cpus/cpu@0 missing clock-frequency property [ 0.025797] /cpus/cpu@1 missing clock-frequency property [ 0.025809] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.025834] Setting up static identity map for 0x806a9808 - 0x806a9878 [ 0.080887] CPU1: Booted secondary processor [ 0.080916] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.081051] Brought up 2 CPUs [ 0.081068] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.081075] CPU: All CPU(s) started in SVC mode. [ 0.081497] devtmpfs: initialized [ 0.082257] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.083977] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.097163] omap_hwmod: tptc0 using broken dt data from edma-controller [ 0.097668] omap_hwmod: tptc1 using broken dt data from edma-controller [ 0.192750] omap_hwmod: dcan1: _wait_target_disable failed [ 0.230476] omap_hwmod: tpcc: _wait_target_disable failed [ 0.297999] pinctrl core: initialized pinctrl subsystem [ 0.298760] regulator-dummy: no parameters [ 0.302826] NET: Registered protocol family 16 [ 0.304709] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.306841] cpuidle: using governor ladder [ 0.306851] cpuidle: using governor menu [ 0.353962] syscon 4a002000.tisysconcore: regmap [mem 0x4a002000-0x4a0026cf] registered [ 0.354304] syscon 4a002e00.tisyscon: regmap [mem 0x4a002e00-0x4a002e7b] registered [ 0.357205] OMAP GPIO hardware version 0.1 [ 0.371911] platform 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 0.372228] platform 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ 0.372534] platform 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 0.390982] platform 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 0.397274] No ATAGs? [ 0.397301] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.397310] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.400294] OMAP DMA hardware revision 0.0 [ 0.430497] bio: create slab at 0 [ 0.446192] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.454502] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver [ 0.455389] evm_3v3_sd: 3300 mV [ 0.455713] evm_3v3_sw: 3300 mV [ 0.455779] reg-fixed-voltage fixedregulator-evm_3v3_sw: Failed to find supply vin [ 0.455969] reg-fixed-voltage fixedregulator-evm_3v3_sw: Failed to register regulator: -517 [ 0.455989] platform fixedregulator-evm_3v3_sw: Driver reg-fixed-voltage requests probe deferral [ 0.456247] aic_dvdd: 1800 mV [ 0.456301] reg-fixed-voltage fixedregulator-aic_dvdd: Failed to find supply vin [ 0.456482] reg-fixed-voltage fixedregulator-aic_dvdd: Failed to register regulator: -517 [ 0.456501] platform fixedregulator-aic_dvdd: Driver reg-fixed-voltage requests probe deferral [ 0.456758] vmmcwl_fixed: 1800 mV [ 0.457077] vtt_fixed: 1350 mV [ 0.457121] reg-fixed-voltage fixedregulator-vtt: Failed to find supply vin [ 0.457301] reg-fixed-voltage fixedregulator-vtt: Failed to register regulator: -517 [ 0.457320] platform fixedregulator-vtt: Driver reg-fixed-voltage requests probe deferral [ 0.461316] vgaarb: loaded [ 0.461740] i2c-core: driver [palmas] using legacy suspend method [ 0.461749] i2c-core: driver [palmas] using legacy resume method [ 0.462352] SCSI subsystem initialized [ 0.463601] usbcore: registered new interface driver usbfs [ 0.463767] usbcore: registered new interface driver hub [ 0.463943] usbcore: registered new device driver usb [ 0.465710] ======palmas_i2c_probe:526======== [ 0.465730] ======palmas_i2c_probe:559, features=0x0======== [ 0.466292] palmas 0-0058: IRQ missing: skipping irq request [ 0.466631] palmas 0-0058: Muxing GPIO a, PWM 0, LED 0 [ 0.466780] prom_parse: Bad cell count for /ocp/i2c@48070000/tps659038@58 [ 0.468345] SMPS12: at 980 mV [ 0.469257] SMPS3: at 1350 mV [ 0.470892] smps45: 850 <--> 1150 mV at 970 mV [ 0.472552] smps6: 850 <--> 1250 mV at 1060 mV [ 0.474010] smps7: 850 <--> 1060 mV at 1020 mV [ 0.475635] smps8: 850 <--> 1250 mV at 970 mV [ 0.477085] smps9: 1800 mV [ 0.482357] ldo1: 1800 <--> 3300 mV at 3000 mV [ 0.491185] ldo2: 3300 mV [ 0.501354] ldo3: 1800 mV [ 0.502205] LDO4: no parameters [ 0.502794] LDO5: no parameters [ 0.503380] LDO6: no parameters [ 0.503982] LDO7: no parameters [ 0.504572] LDO8: no parameters [ 0.511214] ldo9: 1050 mV [ 0.521238] ldoln: 1800 mV [ 0.531304] ldousb: 3300 mV [ 0.532012] REGEN1: no parameters [ 0.532436] regen2: no parameters [ 0.533134] sysen1: no parameters [ 0.533715] sysen2: no parameters [ 0.533965] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.551293] pcf857x: probe of 1-0026 failed with error -121 [ 0.552807] omap_i2c 48072000.i2c: bus 1 rev0.12 at 1 kHz [ 0.553242] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.554127] pcf857x: probe of 3-0021 failed with error -121 [ 0.554158] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz [ 0.554597] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 0.554925] media: Linux media interface: v0.10 [ 0.555076] Linux video capture interface: v2.00 [ 0.555306] pps_core: LinuxPPS API ver. 1 registered [ 0.555315] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.555430] PTP clock support registered [ 0.556930] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.557390] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.558585] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.558702] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.558809] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.558921] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.559112] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.559228] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.560011] Advanced Linux Sound Architecture Driver Initialized. [ 0.561570] Switched to clocksource arch_sys_counter [ 0.580338] NET: Registered protocol family 2 [ 0.581044] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.581109] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.581241] TCP: Hash tables configured (established 8192 bind 8192) [ 0.581286] TCP: reno registered [ 0.581299] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.581331] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.581524] NET: Registered protocol family 1 [ 0.581816] RPC: Registered named UNIX socket transport module. [ 0.581826] RPC: Registered udp transport module. [ 0.581834] RPC: Registered tcp transport module. [ 0.581841] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.583054] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.586139] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.699227] bounce pool size: 64 pages [ 0.699506] VFS: Disk quotas dquot_6.5.2 [ 0.699620] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.700233] NFS: Registering the id_resolver key type [ 0.700268] Key type id_resolver registered [ 0.700277] Key type id_legacy registered [ 0.700309] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.700496] msgmni has been set to 1455 [ 0.704588] alg: No test for stdrng (krng) [ 0.704769] NET: Registered protocol family 38 [ 0.704799] io scheduler noop registered (default) [ 0.704808] io scheduler deadline registered [ 0.704848] io scheduler cfq registered [ 0.711140] pinctrl-single 4a003400.pinmux: 281 pins at pa fc003400 size 1124 [ 0.722491] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 0.722505] pci_bus 0000:00: root bus resource [io 0x1000-0x10000] [ 0.722516] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.722528] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.723043] PCI: bus0: Fast back to back transfers disabled [ 0.724049] PCI: bus1: Fast back to back transfers disabled [ 0.724206] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.724222] pci 0000:00:00.0: BAR 8: assigned [mem 0x20200000-0x202fffff] [ 0.724235] pci 0000:00:00.0: BAR 9: assigned [mem 0x20300000-0x203fffff pref] [ 0.724248] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.724262] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.724278] pci 0000:01:00.0: BAR 6: assigned [mem 0x20300000-0x2033ffff pref] [ 0.724290] pci 0000:01:00.0: BAR 0: assigned [mem 0x20200000-0x2021ffff] [ 0.724310] pci 0000:01:00.0: BAR 1: assigned [mem 0x20220000-0x2022ffff] [ 0.724330] pci 0000:01:00.0: BAR 3: assigned [mem 0x20230000-0x20233fff] [ 0.724349] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x101f] [ 0.724369] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.724380] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 0.724391] pci 0000:00:00.0: bridge window [mem 0x20200000-0x202fffff] [ 0.724402] pci 0000:00:00.0: bridge window [mem 0x20300000-0x203fffff pref] [ 0.724420] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.724430] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 0.724442] pci 0000:00:00.0: bridge window [mem 0x20200000-0x202fffff] [ 0.724453] pci 0000:00:00.0: bridge window [mem 0x20300000-0x203fffff pref] [ 0.726921] OMAP DSS rev 6.1 [ 0.732051] platform encoder@1: Driver dra7evm-tpd12s015 requests probe deferral [ 0.732784] connector-hdmi connector@1: failed to find video source [ 0.732802] platform connector@1: Driver connector-hdmi requests probe deferral [ 0.733758] pbias_mmc_omap5: 1800 <--> 3000 mV at 3000 mV [ 0.734584] abb_mpu: 1100 <--> 1210 mV [ 0.734957] abb_ivahd: 1060 <--> 1250 mV [ 0.735314] abb_dspeve: 1060 <--> 1250 mV [ 0.735681] abb_gpu: 1060 <--> 1280 mV [ 0.736871] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.741511] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 299, base_baud = 3000000) is a 8250 [ 0.742299] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 300, base_baud = 3000000) is a 8250 [ 0.743100] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250 [ 2.032012] console [ttyS2] enabled [ 2.036351] 48066000.serial: ttyS4 at MMIO 0x48066000 (irq = 302, base_baud = 3000000) is a 8250 [ 2.046089] 48068000.serial: ttyS5 at MMIO 0x48068000 (irq = 303, base_baud = 3000000) is a 8250 [ 2.055727] 48424000.serial: ttyS8 at MMIO 0x48424000 (irq = 304, base_baud = 3000000) is a 8250 [ 2.065360] 4ae2b000.serial: ttyS9 at MMIO 0x4ae2b000 (irq = 305, base_baud = 3000000) is a 8250 [ 2.076142] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 2.083353] [drm] Initialized drm 1.1.0 20060810 [ 2.098742] brd: module loaded [ 2.107316] loop: module loaded [ 2.110832] (hci_tty): inside hci_tty_init [ 2.115323] (hci_tty): allocated 249, 0 [ 2.121821] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 2.128571] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.137155] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.147683] scsi0 : ahci_platform [ 2.151498] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 343 [ 2.160823] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.176873] usbcore: registered new interface driver asix [ 2.182461] usbcore: registered new interface driver ax88179_178a [ 2.188718] usbcore: registered new interface driver cdc_ether [ 2.194751] usbcore: registered new interface driver smsc95xx [ 2.200658] usbcore: registered new interface driver net1080 [ 2.206498] usbcore: registered new interface driver cdc_subset [ 2.212624] usbcore: registered new interface driver zaurus [ 2.218391] usbcore: registered new interface driver cdc_ncm [ 2.225031] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.231606] ehci-pci: EHCI PCI platform driver [ 2.236209] ehci-omap: OMAP-EHCI Host Controller driver [ 2.241936] usbcore: registered new interface driver cdc_wdm [ 2.247773] usbcore: registered new interface driver usb-storage [ 2.254135] usbcore: registered new interface driver usbserial [ 2.260130] usbcore: registered new interface driver pl2303 [ 2.265878] usbserial: USB Serial support registered for pl2303 [ 2.272977] mousedev: PS/2 mouse device common for all mice [ 2.281005] i2c-core: driver [rtc-ds1307] using legacy suspend method [ 2.287491] i2c-core: driver [rtc-ds1307] using legacy resume method [ 2.294558] omap_rtc 48838000.rtcss: rtc core: registered 48838000.rtcss as rtc0 [ 2.302943] i2c /dev entries driver [ 2.308024] ov1063x 1-0037: ov1063x Product ID 0 Manufacturer ID 0 [ 2.315201] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 2.321382] vip 48990000.vip: No explicit pinctrl resources data. [ 2.328474] vip 48990000.vip: loading firmware vpdma-1b8.bin [ 2.334522] vpe 489d0000.vpe: Device registered as /dev/video0 [ 2.341011] DRA7xx Radio probe done [ 2.345016] Driver for 1-wire Dallas network protocol. [ 2.351332] coproc iva_coproc: probe [ 2.354953] vip 48990000.vip: VPDMA firmware loaded [ 2.359878] vip2-s0: Port A enabled but no endpoints found [ 2.365331] Adding alias for supply vdd,iva_coproc -> vdd,4a0025cc.voltdm [ 2.372351] vip2-s1: Port A enabled but no endpoints found [ 2.377686] vip2-s0: Port B enabled but no endpoints found[ 2.381621] Adding alias for supply vbb,iva_coproc -> vbb,4a0025cc.voltdm [ 2.390089] vip2-s1: Using subdev ov1063x 1-0037 for capture [ 2.396136] vip2-s1: vip Device registered as /dev/video1 [ 2.402255] coproc iva_coproc: coproc_probe result=0 [ 2.407283] coproc dsp_coproc: probe [ 2.410956] Adding alias for supply vdd,dsp_coproc -> vdd,4a0025e0.voltdm [ 2.417817] Adding alias for supply vbb,dsp_coproc -> vbb,4a0025e0.voltdm [ 2.425739] coproc dsp_coproc: coproc_probe result=0 [ 2.435149] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.482134] omap_hsmmc 480b4000.mmc: unable to get vmmc regulator -517 [ 2.489809] platform 480b4000.mmc: Driver omap_hsmmc requests probe deferral [ 2.499311] 480d1000.mmc supply vmmc not found, using dummy regulator [ 2.506209] omap_hsmmc 480d1000.mmc: could not set regulator OCR (-22) [ 2.552271] ledtrig-cpu: registered to indicate activity on CPUs [ 2.557847] omap_hsmmc 480d1000.mmc: exceeding card's volts [ 2.564239] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 2.583682] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 2.589983] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 2.596362] alg: skcipher: setkey failed on test 5 for ecb-des-omap: flags=100 [ 2.604112] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ 2.612280] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100 [ 2.625493] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 2.631273] omap-sham 4b101000.sham: initialization failed. [ 2.636929] omap-sham: probe of 4b101000.sham failed with error -22 [ 2.639071] mmc1: host does not support reading read-only switch. assuming write-enable. [ 2.641023] omap_hsmmc 480d1000.mmc: no pinctrl state for hs or hs-rev20 mode [ 2.641034] omap_hsmmc 480d1000.mmc: no pinctrl state for hs or hs-rev20 mode [ 2.641091] omap_hsmmc 480d1000.mmc: no pinctrl state for hs or hs-rev20 mode [ 2.641105] mmc1: new high speed SDHC card at address 0001 [ 2.678666] mmcblk1: mmc1:0001 SD4GB 3.64 GiB [ 2.679196] usbcore: registered new interface driver usbhid [ 2.679198] usbhid: USB HID core driver [ 2.693385] remoteproc0: 58820000.ipu is available [ 2.694143] mmcblk1: p1 [ 2.700877] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 2.709954] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 2.720545] remoteproc0: Direct firmware load failed with error -2 [ 2.727045] remoteproc1: 55020000.ipu is available [ 2.731971] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 2.740967] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 2.751376] remoteproc0: Falling back to user helper [ 2.751731] remoteproc1: Direct firmware load failed with error -2 [ 2.751734] remoteproc1: Falling back to user helper [ 2.752002] remoteproc2: 40800000.dsp is available [ 2.752006] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 2.752009] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 2.752128] remoteproc2: Direct firmware load failed with error -2 [ 2.752130] remoteproc2: Falling back to user helper [ 2.752530] remoteproc3: 41000000.dsp is available [ 2.752534] remoteproc3: Note: remoteproc is still under development and considered experimental. [ 2.752537] remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 2.752865] remoteproc3: Direct firmware load failed with error -2 [ 2.752869] remoteproc3: Falling back to user helper [ 2.841292] tlv320aic3x-codec 1-0018: Failed to get supply 'IOVDD': -517 [ 2.848068] tlv320aic3x-codec 1-0018: Failed to request supplies: -517 [ 2.854758] i2c 1-0018: Driver tlv320aic3x-codec requests probe deferral [ 2.861821] tlv320aic3x-codec 1-0019: Failed to get supply 'IOVDD': -517 [ 2.868552] tlv320aic3x-codec 1-0019: Failed to request supplies: -517 [ 2.875236] i2c 1-0019: Driver tlv320aic3x-codec requests probe deferral [ 2.882208] tlv320aic3x-codec 1-001a: Failed to get supply 'IOVDD': -517 [ 2.888939] tlv320aic3x-codec 1-001a: Failed to request supplies: -517 [ 2.895618] i2c 1-001a: Driver tlv320aic3x-codec requests probe deferral [ 2.902864] platform bt_sco_card: Driver asoc-simple-card requests probe deferral [ 2.911131] asoc-simple-card asoc-simple-card.0: hdmi-hifi <-> 58040000.encoder mapping ok [ 2.921210] davinci-mcasp 48464000.mcasp: DAI is shared [ 2.928263] davinci-mcasp 48474000.mcasp: DAI is shared [ 2.935186] davinci_evm primary_sound: Could not get requested rate 11289600 using 10000000. [ 2.943766] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 2.950525] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 2.957457] platform primary_sound: Driver davinci_evm requests probe deferral [ 2.965244] dra7xx-jamr3-snd jamr3_sound: ASoC: CODEC (null) not registered [ 2.972281] dra7xx-jamr3-snd jamr3_sound: failed to register sound card -517 [ 2.979370] platform jamr3_sound: Driver dra7xx-jamr3-snd requests probe deferral [ 2.987834] oprofile: using timer interrupt. [ 2.992211] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.998798] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.004224] TCP: cubic registered [ 3.007552] Initializing XFRM netlink socket [ 3.011870] NET: Registered protocol family 17 [ 3.016350] NET: Registered protocol family 15 [ 3.020883] Bridge firewalling registered [ 3.024931] can: controller area network core (rev 20120528 abi 9) [ 3.031195] NET: Registered protocol family 29 [ 3.035677] can: raw protocol (rev 20120528) [ 3.040009] 8021q: 802.1Q VLAN Support v1.8 [ 3.044287] Key type dns_resolver registered [ 3.048576] NET: Registered protocol family 41 [ 3.053749] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 3.060050] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 3.066381] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 3.073217] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 3.081966] cpu cpu0: cpu0 clock notifier not ready, retry [ 3.087485] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 3.095155] Power Management for TI OMAP4+ devices. [ 3.100221] ThumbEE CPU extension supported. [ 3.104538] Registering SWP/SWPB emulation handler [ 3.109348] SmartReflex Class3 initialized [ 3.114868] REGEN1: disabling [ 3.119254] vmmcwl_fixed: disabling [ 3.122798] evm_3v3_sd: disabling [ 3.126128] regulator-dummy: disabling [ 3.130171] dmm 4e000000.dmm: workaround for errata i878 in use [ 3.138436] dmm 4e000000.dmm: initialized all PAT entries [ 3.144429] platform omapdrm.0: Driver omapdrm requests probe deferral [ 3.152854] evm_3v3_sw: 3300 mV [ 3.156144] evm_3v3_sw: supplied by sysen1 [ 3.160826] aic_dvdd: 1800 mV [ 3.163975] aic_dvdd: supplied by evm_3v3_sw [ 3.168653] vtt_fixed: 1350 mV [ 3.171856] vtt_fixed: supplied by sysen2 [ 3.217689] asoc-simple-card bt_sco_card: bt-sco-pcm <-> 48478000.mcasp mapping ok [ 3.227055] davinci_evm primary_sound: Could not get requested rate 11289600 using 10000000. [ 3.235611] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 3.242406] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 3.249323] platform primary_sound: Driver davinci_evm requests probe deferral [ 3.254767] mmc2: BKOPS_EN bit is not set [ 3.259177] mmc2: new high speed DDR MMC card at address 0001 [ 3.266735] mmcblk2: mmc2:0001 R1J55A 7.28 GiB [ 3.271473] mmcblk2boot0: mmc2:0001 R1J55A partition 1 128 KiB [ 3.277545] mmcblk2boot1: mmc2:0001 R1J55A partition 2 128 KiB [ 3.283692] dra7xx-jamr3-snd jamr3_sound: multicodec <-> 48474000.mcasp mapping ok [ 3.292261] mmcblk2: p1 p2 [ 3.296195] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 3.302608] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 3.309206] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 3.316379] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 3.325140] cpu cpu0: cpu0 clock notifier not ready, retry [ 3.330665] mmcblk2boot1: unknown partition table [ 3.335605] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 3.344678] mmcblk2boot0: unknown partition table [ 3.364677] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.371322] [drm] No driver support for vblank timestamp query. [ 3.652288] [drm] Enabling DMM ywrap scrolling [ 3.747797] Console: switching to colour frame buffer device 240x67 [ 3.770164] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 3.776123] omapdrm omapdrm.0: registered panic notifier [ 3.781469] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0 [ 3.787848] davinci_evm primary_sound: Could not get requested rate 11289600 using 10000000. [ 3.796389] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 3.803184] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 3.810101] platform primary_sound: Driver davinci_evm requests probe deferral [ 3.817559] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 3.823893] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 3.830211] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 3.837050] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 3.845800] cpu cpu0: cpu0 clock notifier not ready, retry [ 3.851318] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 3.860036] omap_rtc 48838000.rtcss: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.868890] sr_init: No PMIC hook to init smartreflex [ 3.874317] sr_init: platform driver register failed for SR [ 3.893277] ALSA device list: [ 3.896264] #1: HDMI 58040000.encoder [ 3.900114] #2: DRA7xx-WiLink [ 3.903283] #3: DRA7xx-JAMR3 [ 12.161596] ata1: softreset failed (1st FIS failed) [ 22.171594] ata1: softreset failed (1st FIS failed) [ 27.561617] ata1: SATA link down (SStatus 0 SControl 300) [ 28.128032] EXT4-fs (mmcblk2p2): recovery complete [ 28.133961] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: (null) [ 28.142135] VFS: Mounted root (ext4 filesystem) on device 179:10. [ 28.151880] devtmpfs: mounted [ 28.155108] Freeing unused kernel memory: 376K (c094c000 - c09aa000) INIT: version 2.88 booting Starting udev [ 28.432999] udevd[1219]: starting version 182 [ 29.026126] davinci_evm primary_sound: Could not get requested rate 11289600 using 10000000. [ 29.119296] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 29.197285] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 29.274876] platform primary_sound: Driver davinci_evm requests probe deferral [ 29.303162] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 29.309469] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 29.324459] remoteproc3: failed to load dra7-dsp2-fw.xe66 [ 29.353343] remoteproc2: powering up 40800000.dsp [ 29.358181] remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 929770 [ 29.396423] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 29.400808] ov1063x 1-0037: r3003 = 17 , r3004 = 23 [ 29.400814] ov1063x 1-0037: width x height = 720 x 480 [ 29.400819] ov1063x 1-0037: hts x vts = 1083 x 530 [ 29.431698] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 29.437598] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 29.443557] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 29.450158] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 29.477479] remoteproc0: failed to load dra7-ipu1-fw.xem4 [ 29.485397] cpu cpu0: cpu0 clock notifier not ready, retry [ 29.490939] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 29.570800] davinci_evm primary_sound: Could not get requested rate 11289600 using 10000000. [ 29.584278] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 29.596658] random: nonblocking pool is initialized [ 29.602479] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 29.627637] platform primary_sound: Driver davinci_evm requests probe deferral [ 29.630353] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 29.630356] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 29.630460] PCI: enabling device 0000:01:00.0 (0140 -> 0142) [ 29.630731] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 29.666329] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 29.674291] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 29.682347] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 29.689376] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 29.700118] cpu cpu0: cpu0 clock notifier not ready, retry [ 29.706424] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 29.715583] davinci_evm primary_sound: Could not get requested rate 11289600 using 10000000. [ 29.726503] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 29.735164] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 29.747594] platform primary_sound: Driver davinci_evm requests probe deferral [ 29.763543] remoteproc1: powering up 55020000.ipu [ 29.783102] remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3484972 [ 29.790118] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 udevd[1498]: failed to execute '/etc/udev/scripts/mount.sh' '/etc/udev/scripts/mount.sh': No such file or directory udevd[1499]: failed to execute '/etc/udev/scripts/mount.sh' '/etc/udev/scripts/mount.sh': No such file or directory [ 29.914723] e1000e 0000:01:00.0 eth0: registered PHC clock [ 29.920248] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 udevd[1502]: failed to execute '/etc/udev/scripts/mount.sh' '/etc/udev/scripts/mount.sh': No such file or directory [ 29.974792] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 29.999037] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 30.025691] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 30.035518] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 30.061866] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 30.067909] remoteproc2: remote processor 40800000.dsp is now up [ 30.099684] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 30.108497] cpu cpu0: cpu0 clock notifier not ready, retry [ 30.112357] remoteproc1: remote processor 55020000.ipu is now up [ 30.121093] virtio_rpmsg_bus virtio1: rpmsg host is online [ 30.126792] virtio_rpmsg_bus virtio0: rpmsg host is online [ 30.131651] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 30.132208] davinci_evm primary_sound: Could not get requested rate 11289600 using 10000000. [ 30.132257] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 30.132297] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 30.132316] platform primary_sound: Driver davinci_evm requests probe deferral [ 30.169112] remoteproc1: registered virtio1 (type 7) [ 30.169293] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 30.169297] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 30.169330] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 30.169339] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 30.169344] cpu cpu0: cpu0 clock notifier not ready, retry [ 30.169359] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 30.169708] davinci_evm primary_sound: Could not get requested rate 11289600 using 10000000. [ 30.169741] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 30.169776] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 30.169792] platform primary_sound: Driver davinci_evm requests probe deferral [ 30.244590] remoteproc2: registered virtio0 (type 7) [ 30.244747] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 30.244751] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 30.244772] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 30.244780] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 30.244785] cpu cpu0: cpu0 clock notifier not ready, retry [ 30.244799] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 30.245142] davinci_evm primary_sound: Could not get requested rate 11289600 using 10000000. [ 30.245175] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 30.245209] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 30.245226] platform primary_sound: Driver davinci_evm requests probe deferral [ 30.320851] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x3b [ 30.329239] rpmsg_rpc rpmsg0: probing service rpmsg-dce with src 1024 dst 59 [ 30.337202] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x36 [ 30.337394] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 30.337398] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 30.337422] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 30.337430] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 30.337436] cpu cpu0: cpu0 clock notifier not ready, retry [ 30.337450] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 30.337829] davinci_evm primary_sound: Could not get requested rate 11289600 using 10000000. [ 30.337866] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 30.337901] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 30.337916] platform primary_sound: Driver davinci_evm requests probe deferral [ 30.417909] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x37 [ 30.427506] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x3b [ 30.436497] rpmsg_rpc rpmsg3: probing service rpmsg-dce-dsp with src 1024 dst 59 [ 30.445249] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 30.452810] rpmsg_rpc rpmsg3: published functions = 8 [ 30.457921] rpmsg_rpc rpmsg0: published functions = 8 [ 30.463058] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 30.469383] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 30.476299] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 30.485148] cpu cpu0: cpu0 clock notifier not ready, retry [ 30.490739] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 30.498816] davinci_evm primary_sound: Could not get requested rate 11289600 using 10000000. [ 30.507455] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 30.514286] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 30.521246] platform primary_sound: Driver davinci_evm requests probe deferral [ 30.537805] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 30.544129] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 30.550446] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 30.557283] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 30.566100] cpu cpu0: cpu0 clock notifier not ready, retry [ 30.571637] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 30.579385] davinci_evm primary_sound: Could not get requested rate 11289600 using 10000000. [ 30.587906] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 30.594678] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 30.601619] platform primary_sound: Driver davinci_evm requests probe deferral [ 30.945229] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 30.952433] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 30.958821] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 30.965743] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 30.974853] cpu cpu0: cpu0 clock notifier not ready, retry [ 30.980448] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 30.984289] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 30.984855] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 31.001632] xhci-hcd xhci-hcd.0.auto: irq 435, io mem 0x48890000 [ 31.002165] davinci_evm primary_sound: Could not get requested rate 11289600 using 10000000. [ 31.002207] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 31.002246] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 31.002264] platform primary_sound: Driver davinci_evm requests probe deferral [ 31.037339] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 31.044218] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 31.051475] usb usb1: Product: xHCI Host Controller [ 31.056393] usb usb1: Manufacturer: Linux 3.14.67-gb3b170c-dirty xhci-hcd [ 31.063296] usb usb1: SerialNumber: xhci-hcd.0.auto [ 31.069001] hub 1-0:1.0: USB hub found [ 31.072818] hub 1-0:1.0: 1 port detected [ 31.077079] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 31.077120] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 31.077437] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 31.077680] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 31.077686] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 31.077692] usb usb2: Product: xHCI Host Controller [ 31.077697] usb usb2: Manufacturer: Linux 3.14.67-gb3b170c-dirty xhci-hcd [ 31.077701] usb usb2: SerialNumber: xhci-hcd.0.auto [ 31.078556] hub 2-0:1.0: USB hub found [ 31.078594] hub 2-0:1.0: 1 port detected [ 31.079038] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 31.079383] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 31.148155] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 31.154517] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 31.161342] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 31.170120] cpu cpu0: cpu0 clock notifier not ready, retry [ 31.170171] xhci-hcd xhci-hcd.1.auto: irq 436, io mem 0x488d0000 [ 31.170376] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 31.170383] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 31.170389] usb usb3: Product: xHCI Host Controller [ 31.170394] usb usb3: Manufacturer: Linux 3.14.67-gb3b170c-dirty xhci-hcd [ 31.170399] usb usb3: SerialNumber: xhci-hcd.1.auto [ 31.171238] hub 3-0:1.0: USB hub found [ 31.171277] hub 3-0:1.0: 1 port detected [ 31.171661] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 31.171960] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 31.172198] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 31.172205] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 31.172211] usb usb4: Product: xHCI Host Controller [ 31.172216] usb usb4: Manufacturer: Linux 3.14.67-gb3b170c-dirty xhci-hcd [ 31.172221] usb usb4: SerialNumber: xhci-hcd.1.auto [ 31.173084] hub 4-0:1.0: USB hub found [ 31.173120] hub 4-0:1.0: 1 port detected [ 31.272370] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 31.280807] davinci_evm primary_sound: Could not get requested rate 11289600 using 10000000. [ 31.291150] davinci_evm primary_sound: ASoC: CODEC (null) not registered [ 31.297947] davinci_evm primary_sound: snd_soc_register_card failed (-517) [ 31.307290] platform primary_sound: Driver davinci_evm requests probe deferral [ 31.314902] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.voltdm [ 31.321201] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.voltdm [ 31.327566] omap_voltdm 4a003b20.voltdm: Unable to get vdd regulator:-517 [ 31.334414] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 31.343269] cpu cpu0: cpu0 clock notifier not ready, retry [ 31.348797] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 31.433981] EXT4-fs (mmcblk2p2): re-mounted. Opts: (null) Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory bootlogd. ALSA: Restoring mixer settings... No state is present for card H58040000encode Found hardware: "HDMI_58040000_e" "" "" "" "" Hardware is initialized using a generic method No state is present for card H58040000encode No state is present for card DRA7xxWiLink Found hardware: "DRA7xx-WiLink" "" "" "" "" Hardware is initialized using a generic method No state is present for card DRA7xxWiLink No state is present for card DRA7xxJAMR3 Found hardware: "DRA7xx-JAMR3" "" "" "" "" Hardware is initialized using a generic method No state is present for card DRA7xxJAMR3 Thu Sep 3 18:41:00 UTC 2015 2017.05.08 12:00 PM EQT This version is for J6 [ 46.846788] dwc3 488d0000.usb: otg: usb_otg_unregister_hcd: device not registered to otg core [ 46.855641] xhci-hcd xhci-hcd.1.auto: remove, state 4 [ 46.861138] usb usb4: USB disconnect, device number 1 [ 46.867698] xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered [ 46.875003] dwc3 488d0000.usb: otg: usb_otg_unregister_hcd: device not registered to otg core [ 46.883816] xhci-hcd xhci-hcd.1.auto: remove, state 4 [ 46.889280] usb usb3: USB disconnect, device number 1 [ 46.895786] xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered [ 46.903850] dwc3 48890000.usb: otg: usb_otg_unregister_hcd: device not registered to otg core [ 46.912682] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 46.918154] usb usb2: USB disconnect, device number 1 [ 46.924558] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered [ 46.931535] dwc3 48890000.usb: otg: usb_otg_unregister_hcd: device not registered to otg core [ 46.940376] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 46.945900] usb usb1: USB disconnect, device number 1 [ 46.952397] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered [AB_server.c, AB_boot_finish, 120] AB boot success, pull high GPIO [AB_server.c, AB_boot_finish, 140] AB boot success, pull high GPIO finished /usr/local/bin/set_unused_gpio_input: line 14: echo: write error: Device or resource busy /usr/local/bin/set_unused_gpio_input: line 15: /sys/class/gpio/gpio180/direction: No such file or directory /usr/local/bin/set_unused_gpio_input: line 14: echo: write error: Device or resource busy /usr/local/bin/set_unused_gpio_input: line 15: /sys/class/gpio/gpio204/direction: No such file or directory [AB_server.c, main, 233] AB_server: version 0110 INIT: Entering runlevel: 5 Configuring network interfaces... [ 48.632716] 8021q: adding VLAN 0 to HW filter on device eth0 udhcpc (v1.22.1) started Sending discover... Sending discover... [ 51.812603] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None Sending discover... No lease, forking to background done. Starting system message bus: dbus. UIM SYSFS Node Not Found Starting telnet daemon. Starting tiipclad daemon GateMP support enabled on host Opened log file: lad.txt numProcessors = 5 id = 0 baseId = 0 Spawned daemon: /usr/bin/lad_dra7xx . Starting rpcbind daemon...rpcbind: cannot create socket for udp6 rpcbind: cannot create socket for tcp6 done. creating NFS state directory: done starting statd: done NFS daemon support not enabled in kernel Starting syslogd/klogd: done Starting thttpd. Enabling thermal zones... Stopping Bootlog daemon: bootlogd. root@wnc-j6:~#