• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 48 subscribers
  • Views 307 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA548: Recommended Design for High Current AO Output

Anna
Intellectual 955 points
Part Number: OPA548
Other Parts Discussed in Thread: OPA593

Hi Dear,

The customer wants to create an AO module with an output current of around 200mA to drive the servo valve, with an accuracy of 1%.

Currently, the customer is considering using DAC with operational amplifier conditioning to achieve high current output. Are there any mature circuit recommendations? How to choose DAC and operational amplifier?

Is there any other circuit that can be implemented besides this method?thanks

  • 0
    Guru 282390 points

    Important parameters are the required output voltages, accuracy, and signal frequencies, and the available power supplies. Do you need to output a specific voltage or current?

  • 0
    TI__Guru 56731 points

    Hi Anna, 

    Anna said:
    The customer wants to create an AO module with an output current of around 200mA to drive the servo valve, with an accuracy of 1%

    Please specify the design requirements as pointed it out by Clemens. 

    Anna said:
    Is there any other circuit that can be implemented besides this method

    We have many reference designs that may meet the V-to-I converter design categories. Without the complete design requirements, it is difficult to say which one is more suitable or the best fit for the application. 

    In terms of power amplifier, the OPA593 may be a good option for the power amplifier application.

    https://www.ti.com/lit/ds/symlink/opa593.pdf?ts=1695806112421

    Best,

    Raymond