• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 1383 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA551 - Question on intrinsic output impedance (Z0)

Brian Gosselin
Expert 4665 points
Other Parts Discussed in Thread: OPA551

Hi team,

What's the intrinsic output impedance (Z0) for the OPA551?  I can't locate it in the datasheet.

Regards,
Brian Gosselin

  • 0
    TI__Guru 63790 points

    Brian,

    I have simulated the OPA551 open-loop output impedance (see below); it's around 18ohm across most of the frequency range. Of course, it's only as good as the macro-model itself but should be pretty close to the actual value.