Amplifiers

Amplifiers forum

State TI Thinks Resolved
Locked Locked
Replies 6 replies
Answers 2 answers
Subscribers 48 subscribers
Views 955 views
Users 0 members are here

Support feedback

Options

Options

Similar topics

DIYAMP-SOIC-EVM and DUAL-DIYAMP-EVM

5964434

Prodigy 40 points

Other Parts Discussed in Thread: DUAL-DIYAMP-EVM

Does TI provide the board design files for these development kits? Having this data would help create a solder paste mask.

over 5 years ago

0 Dennis Goeke over 5 years ago

TI__Genius 11135 points

Joe

See attached gerber files. The file with extension .GTP is the top side paste mask, and .GBP is the bottom side.

Regards

Dennis

PA025A_Gerbers.zip

0 5964434 over 5 years ago in reply to Dennis Goeke

Prodigy 40 points

Thanks. Can you supply gerbers for the DUAL-DIYAMP-EVM as well? I am assembling prototypes with both types of boards.

0 Dennis Goeke over 5 years ago in reply to 5964434

TI__Genius 11135 points

Joe

The dual-diyamp-evm is with another team. I forwarded your other e2e thread to them. I assume you haven't heard from them?

Dennis

0 5964434 over 5 years ago in reply to Dennis Goeke

Prodigy 40 points

Correct. I haven't heard anything yet.

0 Dennis Goeke over 5 years ago in reply to 5964434

TI__Genius 11135 points

Joe

Someone from that team will contact you off-line.

Dennis

0 Dennis Goeke over 5 years ago in reply to Dennis Goeke

TI__Genius 11135 points

Joe

They tell me they emailed you off-line but haven't received a response. Check and make sure the email address in your profile is correct.
You should also respond to your other thread. That's the one I transferred to the other team. That's the one they will see if you need additional help.

Regards
Dennis