Dear Sirs or Madams,
Please let me have the following two questions regarding Recommended Operating Condition on Supply Voltage;
Q1
The datasheet says that Minimum operational supply voltage is 2.2V, which means that TLV1701 is definately activated
on the condition that the supply voltage equals to 2.2V or is higher than 2.2V.
Please let me know the state of Pin4(OUT pin) when TLV1701 is not activated because the supply voltage is low or 0V.
Is the pin set to Hi-Z? Or, is the pin fixed to Low?
Q2
Regarding the supply voltage, I now understand it is possible that TLV1701 works normally even when supply voltage is lower than 2.2V.
If possible, please let me know on what supply voltage TLV1701 can work normally at lower side.
Of course, I never plan to use TLV1701 on the condition that supply voltage is lower than 2.2V.
Through this question, I just want to roughly know from what supply voltage TLV1701 tends to start working normally.
Accurate information is not necessarily needed, and even rough value would be appreciated.
I know that it will be difficult to answer to this question, so if it is impossible to answer to this question, please let me know it.
In such case, I will not have further questions related to Q2.
Best regards,
Shinsuke Tanaka