Does TI have integrated 4-20mA transmitters for inputs from RTDs (resistive temperature detectors)?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Yes. When using an RTD, take care that your input signal is properly conditioned. See the attached articles to learn how to use an amplifier with optimized positive feedback to correct for the decrease in RTD sensitivity over temperature. The listed XTR devices include all of the excitation, linearization, and amplification for an RTD input.
TI devices: XTR105, XTR108, XTR112
The following reference designs go through the theory, component selection, simulation, complete PCB schematic & layout, bill of materials, and measured performance results of a 2-wire (loop-powered) 4-20mA sensor transmitter interfacing with 3-wire RTD. Circuit modifications that help to meet alternate design goals are also discussed.