Other Parts Discussed in Thread: TAS5822M
I had a problem tuning the TAS5822MEVM:I controlled the I2C of my power amplifier TAS5822M for tuning through the I2C of TAS5822MEVM. I adjusted the EQ and related parameters and saved them. Then my power amplifier TAS5822M was powered off and powered on again.After listening to the speaker, I found that the sound was not as good as I heard online before. Later, I turned on and off the EQ, DRC and DBE/DDE/DEQ switches of PPC3 tool, and then turned on and off all the switches of L/R1 and L/R2 of EQ interface in turn before the sound would be normal. Why is this so, and did you debug it in this way?