ADS114S08EVM: ADC eval software crashes

Tool/software:

"Delta-Sigma ADC EvaluaTIon Software" will suddenly stop working while running "Analysis Engine for Delta-Sigma ADC EvaluaTIon Software".

This occurs after collecting data several times in succession, and then the main "Delta-Sigma ADC EvaluaTIon Software" window will close while the "Analysis Engine" window is left open but non-functional. The message in the bottom left corner will say "Starting data collection..." and right when the message changes to "Connected to the main app. Ready..." the main app also closes.

Further attempts to collect data result in saying ""Starting data collection..." and then going back to "Connected to the main app. Ready..." with no new data (just 0V) actually being recorded in the window.

I have listed the register settings below and the EVM parameters are a clock freq of 4.096MHz, Vref of 5V, and 16 samples. All samples are being recorded with A0 being connected to 2.5V (from the test point TP21).

[ADS114S08 Register Settings]
ID             	0C
STATUS         	80
INPMUX         	0C
PGA            	00
DATARATE       	17
REF            	30
IDACMAG        	00
IDACMUX        	FF
VBIAS          	00
SYS            	10
RESERVED_0     	00
OFCAL0         	00
OFCAL1         	00
RESERVED_1     	00
FSCAL0         	00
FSCAL1         	40
GPIODAT        	00
GPIOCON        	00