The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS124S08EVM: ADS124S08EMV-DVCPKG installation problem

Part Number: ADS124S08EVM

Hi Team,

My Customer is working with our ADS124S08EMV, installed the ADS124S08EMV-DVCPKG, unfortunately, have some problem with the driver for Windows 10 with Version 1908 (image below).

Already followed these e2e post below and still doesn't resolved the issue:

e2e link: https://e2e.ti.com/support/data-converters/f/73/t/811449?ADS124S08EVM-x386-64-bit-version-appear-to-be-missing-from-the-Drivers-x386-usb-dev-bulk-inf-cannot-find-them-neither-can-I-

e2e link: https://e2e.ti.com/support/data-converters/f/73/t/748091?ADS124S08EVM-ADS124S08EVM

Do we have the latest driver for this system, can you share it with me, please?

Thanks in advance.

Renan

  • Hi Renan,

    When this can happen is when the EVM was plugged into the USB before the driver was installed.  Even after the driver has been installed, the driver may not associate properly for future connections on the same USB port as originally connected.  The device is registered as a Bulk Device but there is no driver file associated with the bulk device.  The association to the driver will need to be done manually.  The actual driver used is WINUSB which is an MS-Win provided driver included with the OS. 

    What would need to be done is right-click on the 'Generic Bulk Device' shown in Device Manager, then select Update Driver.  From the selection pop-up, choose 'Browse my computer for driver software'.  

    From the next pop-up 'Browse for drivers on my computer, select the 'Browse' button and browse to location shown below:

    After the proper location is in the Browse window, select Next.  The proper selection is the usb_dev_bulk.inf file.

    Best regards,

    Bob B