Hi all,
I've planned to use the DLP6500FLQ with UV laser (wl: 349nm, power: 150mW(max), 15mW(min)). The recommended illumination power (Total combined <420nm: 0.68mW/cm^2) was much smaller than our power density(9.65 ~ 96.5mW/cm^2). Related to the power issue, I have several questions below.
1. If we use a 349nm laser source, what would happen on DMD? (e.g., Intensity drop due to the anti-reflection coating degradation)
2. Is the recommended illumination power applied for a laser? I'm quite skeptical for this value since I heard other guys were fine when they used a white source with a color filter(385nm, 50mW/cm^2).
3. I'd like to get your opinion about using 349nm as our laser source with DLP6500FLQ.
4. Can I get a refund if I cannot use the DLP6500FLQ with our laser?
Please let me know if you have any questions or need further information to answer my questions! Thank you!
Best,
Taeseung