This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLP4500: TIDA-00254 - Projector NOT connected

Part Number: DLP4500
Other Parts Discussed in Thread: TIDA-00254

Hi, I am reading TIDA-00254 User's Guide at step 3.4 and occur some question below:

1.

After I type "2: Prepare DLP LightCrafter 4500 (once per projector)".

Why It shows the message "Projector NOT connected"?

I can connect projector in DLPLCR4500GUI-3.0.0/LightCrafter4500.exe correctly.

2.

I use lifeCam cinema.

So the setting in config_camera is Rolling shutter color Camer?

----------------------------------------------------------------------------------------------------

My platform is win7 x64.

Thanks for your reply.

  • Hello Luo,

    Welcome to the E2E forums!

    We are currently looking into this. Have you looked into the "Troubleshooting" section in the User's Guide ?

    Regarding the first question please refer to the first point in that section on p.55. Please make sure you are not running the GUI and the 3D Scanner simultenously and follow the steps mentioned there and let us know if that resolved the problem or not.

    Hope this helps.

    Thanks,

    Sepeedah

  • For the camera you have chosen, you'll need to set it as a rolling shutter color camera as well as to use the OpenCV camera interface.

    Please let us know if you are continuing to have difficulties.

    -Paul