Tool/software:
Hello,
I plan to supply 5V to the Vcc of this transceiver and input a +2V to +3V signal to the A/B Bus input.
The High/Low thresholds of the devices connected to the bus are defined as follows, but since the transceiver's |VOD| is MIN. 1.5V, is it correct to understand that these threshold conditions are fully met?
Requirement: Since RS-422 diff erential input A is positive, and B is negative, if (A-B) is +200mV ormore, the output is High, and if (A-B) is -200mV or less, the output is Low
Thank you,