• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 18 subscribers
  • Views 240 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVC2G32-Q1: FIT Rate

RYO
Intellectual 2000 points
Part Number: SN74LVC2G32-Q1

Hi all,

Can you tell me if the FIT rate shown in the thread below (0.5 FIT or 0.5 failure per 10^9 hours per device) is applicable to SN74LVC2G32-Q1?
https://e2e.ti.com/support/logic/f/logic-forum/803625/sn74lvc1g38-fit-rate-for-sn74lvc1g38dck

Also, do you have a failure mode distribution of standard logics?

Regards,
RYO

  • +1
    TI__Expert 6680 points

    Hi RYO,

    RYO said:
    Can you tell me if the FIT rate shown in the thread below (0.5 FIT or 0.5 failure per 10^9 hours per device) is applicable to SN74LVC2G32-Q1?

    Yes, these two devices are in the same family, and will have the same FIT rate.

    RYO said:
    Also, do you have a failure mode distribution of standard logics?

    I'm not sure if we have information on this, but if you're looking to gather more information on other parts from TI's catalog, I'd recommend you use TI's reliability site here: Reliability | TI.com

    Thanks!

    Chad Crosby