AM2634: AM2634: Downloading application image *appimage size issue with UART uniflash

Hi Jay, 

Can you please verify your statements. I think there might be a typo making things unclear to me: 

Jay Sun said:

We can Downloading *.appimage (210772byte) successfully  by python uart_uniflash.py,

Jay Sun said:

We can't completed downloading *.appimage (756319byte) by python uart_uniflash.py,

Is it just the appimage byte size difference that appears to be an issue? Can you please send over the two cfg files used for the flash writer? 

Thanks,

-Randy

Hi Randy

cfg files is same one

#-----------------------------------------------------------------------------#
#                                                                             #
#      DEFAULT CONFIGURATION FILE TO BE USED WITH THE FLASHWRITER SCRIPT      # 
#                                                                             #
#-----------------------------------------------------------------------------#
#
# By default this config file, 
# - points to pre-built flash writer, bootloader for this EVM
# - The application image points to relative path of the ipc echo application image for this EVM
#   - Make sure this application is built before running this script
# - You can customized this config file to point to your own bootloader and/or application images
# - You can use --operation=flashverify if you just want to verify the flash contents and not flash the file.
#

# First point to sbl_uart_uniflash binary, which function's as a server to flash one or more files
--flash-writer=sbl_prebuilt/am263x-cc/sbl_uart_uniflash.release.tiimage

# Now send one or more files to flash or flashverify as needed. The order of sending files does not matter

# When sending bootloader make sure to flash at offset 0x0. ROM expects bootloader at offset 0x0
--file=sbl_prebuilt/am263x-cc/sbl_qspi.release.tiimage --operation=flash --flash-offset=0x0

# When sending application image, make sure to flash at offset 0x80000 (default) or to whatever offset your bootloader is configured for
#--file=../../am263x_zcu/Debug/am263x_zcu.appimage --operation=flash --flash-offset=0x80000
--file=../../am263x_zcu/Release/am263x_zcu.appimage --operation=flash --flash-offset=0x80000

It is just the appimage byte size difference that appears to be an issue

we try to make different size appimage in same project 

(1)Sent *.appimage of size 627796 bytes in 61.79s.
[STATUS] SUCCESS !!!

Parsing config file ...
Parsing config file ... SUCCESS. Found 3 command(s) !!!

Executing command 1 of 3 ...
Found flash writer ... sending sbl_prebuilt/am263x-cc/sbl_uart_uniflash.release.tiimage
Sent flashwriter sbl_prebuilt/am263x-cc/sbl_uart_uniflash.release.tiimage of size 49534 bytes in 5.65s.

Executing command 2 of 3 ...
Command arguments : --file=sbl_prebuilt/am263x-cc/sbl_qspi.release.tiimage --operation=flash --flash-offset=0x0
Sent sbl_prebuilt/am263x-cc/sbl_qspi.release.tiimage of size 56206 bytes in 8.66s.
[STATUS] SUCCESS !!!

Executing command 3 of 3 ...
Command arguments : --file=../../am263x_zcu/Release/am263x_zcu.appimage --operation=flash --flash-offset=0x80000
Sent ../../am263x_zcu/Release/am263x_zcu.appimage of size 627796 bytes in 61.79s.
[STATUS] SUCCESS !!!

All commands from config file are executed !!!

(2)Sending ../../am263x_zcu/Release/am263x_zcu.appimage: 639011bytes [01:02, 10727.11bytes/s]recv error: getc timeout in start sequence

Parsing config file ...
Parsing config file ... SUCCESS. Found 3 command(s) !!!

Executing command 1 of 3 ...
Found flash writer ... sending sbl_prebuilt/am263x-cc/sbl_uart_uniflash.release.tiimage
Sent flashwriter sbl_prebuilt/am263x-cc/sbl_uart_uniflash.release.tiimage of size 49534 bytes in 5.09s.

Executing command 2 of 3 ...
Command arguments : --file=sbl_prebuilt/am263x-cc/sbl_qspi.release.tiimage --operation=flash --flash-offset=0x0
Sent sbl_prebuilt/am263x-cc/sbl_qspi.release.tiimage of size 56206 bytes in 8.66s.
[STATUS] SUCCESS !!!

Executing command 3 of 3 ...
Command arguments : --file=../../am263x_zcu/Release/am263x_zcu.appimage --operation=flash --flash-offset=0x80000
Sending ../../am263x_zcu/Release/am263x_zcu.appimage: 639011bytes [01:02, 10727.11bytes/s]recv error: getc timeout in start sequence
Sending ../../am263x_zcu/Release/am263x_zcu.appimage: 639013bytes [01:12, 10727.11bytes/s]expected sequence 2, got (seq1=1, seq2=1), receiving next block, will NAK.
recv error: purge, requesting retransmission (NAK)
Sending ../../am263x_zcu/Release/am263x_zcu.appimage: 639013bytes [01:12, 10727.11bytes/s]
[ERROR] XMODEM recv failed, no response OR incorrect response from EVM OR cancelled by user,
        Power cycle EVM and run this script again !!!

BR

JAY

Hi Ming

1. Our USB cable for UART connect UART0, what is UART (PC to J26) meaning?

Ming Wei said:

UART (PC to J26)

Ming Wei said:

2. Use the sbl_jtag_uniflash to write your app image to 0x80000 of QSPI flash. If this works, then the problem is on UART communication.

2. we try to use the sbl_jtag_uniflash to write your app image to 0x80000 of QSPI flash. Verify file in Flash is Verifying success!!

but we restart board with qspi boot is fail, uart log output nothing

how to flash sbl image and *appimage by sbl_jtag_uniflash? 

[Cortex_R5_0]  
 
 ==================
 JTAG Uniflash Menu
 ==================
 
 1: Erase Complete Flash
 2: Write File to Flash and Verify
 3: Verify file in Flash
 
 x: Exit
 
 Enter Choice: 2

 Enter file name along with path to write or verify : C:\GIT_HH\TI_AM263x_new\evw\am263x_zcu\Release\am263x_zcu.appimage
 Enter flash offset (in hex format) : 0x80000
 Enter below command in CCS scripting console to load the file data to memory.
 AFTER the file load is done, enter '1' to continue ...

 loadRaw(0x70040020, 0, "C:/GIT_HH/TI_AM263x_new/evw/am263x_zcu/Release/am263x_zcu.appimage", 32, false);
1
 [FLASH WRITER] Flashing success!!... 
 
 
 ==================
 JTAG Uniflash Menu
 ==================
 
 1: Erase Complete Flash
 2: Write File to Flash and Verify
 3: Verify file in Flash
 
 x: Exit
 
 Enter Choice: 3

 Enter file name along with path to write or verify : C:\GIT_HH\TI_AM263x_new\evw\am263x_zcu\Release\am263x_zcu.appimage
 Enter flash offset (in hex format) : 0x80000
 Enter below command in CCS scripting console to load the file data to memory.
 AFTER the file load is done, enter '1' to continue ...

 loadRaw(0x70040020, 0, "C:/GIT_HH/TI_AM263x_new/evw/am263x_zcu/Release/am263x_zcu.appimage", 32, false);
1
 [FLASH WRITER] Verifying success!!... 
 
 
 ==================
 JTAG Uniflash Menu
 ==================
 
 1: Erase Complete Flash
 2: Write File to Flash and Verify
 3: Verify file in Flash
 
 x: Exit
 

BR

JAY

Hi Jay,

Sorry, I was mixed the AM263x CC and the AM243x EVM. You are correct, the JTAG and UART are using the same USB cable for AM263x CC. Please ignore what I said about the USB cable in previous post.

In order to write the SBL QSPI and the app image, you will need to call the sbl_jtag_uniflash twice. 1st time do the whole flash erase and write the sbl_qspi at flash address 0x00000, then 2nd time, do not erase the flash, just write the app image at 0x80000 in flash. 

In both runs, make sure you use the CCS script (loadRaw) to load your sbl_qspi and app image before enter "1" to continue.

Best regards,

Ming

Hi Ming

We try to write the SBL QSPI and the app image,call the sbl_jtag_uniflash twice,  qspi boot success.

(1) when loadraw  appimage, show time out after 10000ms in scripting console, but Verifying success!!...

(2)SBL_JTAG_UNIFLASH *appimage(756319byte) is ok,what problem with SBL_UART_UNIFLASH?

Ming Wei said:

2. Use the sbl_jtag_uniflash to write your app image to 0x80000 of QSPI flash. If this works, then the problem is on UART communication.

BR

JAY

Hi Jay,

It has nothing to do with the sbl_jtag_uniflash, is is the CCS loading the app image error. Looks like your on-board XDS-110 setting has some issue. Can you please check your "JTAG TCLK Frequency in your target configuration file (CCXML). Mine is look like the following (1Mhz):

I do not have problem to load big app image file.

Hi Ming

Ming Wei said:

Looks like your on-board XDS-110 setting has some issue. Can you please check your "JTAG TCLK Frequency in your target configuration file (CCXML). Mine is look like the following (1Mhz):

We use XDS200 to connect AM263X target, target configuration file (CCXML) as following 

 and loading sbl_uart_jtag.out program is OK, as following

Ming Wei said:

I do not have problem to load big app image file.

You means load big app image file (>752kb) with SBL UART UNIFLASH is ok?

How to debug this issue on our board with BL UART UNIFLASH ?

BR

JAY

Hi Jay,

I am a little confused here. In your post 4 days ago (1) you mentioned the loadraw for appimage (752KB) timed out when you use the sbl_jtag_uniflash 2nd time. I think it is caused by the JTAG TCLK was set too high. Now you are saying that your loadraw of the appimage is OK. Does that means you are OK with sbl_jtag_uniflash? i.e. you can flash both sbl_qspi (0x00000) and your appimage (0x80000) to the flash using sbl_jtag_uniflash? If that is true, your application should work from flash boot mode. Then the next thing is the sbl_uart_uniflash debugging, because the only difference between the sbl_jtag_uniflash and sbl_uart_unflash is the UART communication.

BTW, I did tried to loadraw appimage (620KB). It works when the JTAG TCLK is set to 1Mhz using sbl_jtag_unflash from MCU+ SDK 08.02.00.30 on AM263x CC with on-board XDS-110.

Best regards,

Ming 

Hi Ming

Ming Wei said:

1) you mentioned the loadraw for appimage (752KB) timed out when you use the sbl_jtag_uniflash 2nd time. I think it is caused by the JTAG TCLK was set too high. Now you are saying that your loadraw of the appimage is OK. Does that means you are OK with sbl_jtag_uniflash? i.e. you can flash both sbl_qspi (0x00000) and your appimage (0x80000) to the flash using sbl_jtag_uniflash? If that is true, your application should work from flash boot mode.

(1) Yes , when sbl_jtag_uniflash loadraw  appimage show time out after 10000ms in scripting console, but sbl_jtag_uniflash Verifying success!!... =>so our application appimage (752KB)  work good from flash boot mode with sbl_jtag_uniflash 
(2) Next thing is the sbl_uart_uniflash debugging, please advise us how to fix this issue.

BR

JAY

Hi Jay,

I will start with the UART communication and buffer arrangement of the sbl_uart_uniflash. Please add some debug log info into sbl_uart_uniflash to check where the error is happening. It could be the UART communication related issue, such as receive error. Or it could be the receiving buffer is too small or overlap with data buffer/ code section etc.

Meanwhile, I will report is error to the software development team for further advice.

Thanks!

Ming