MCU-PLUS-SDK-AM243X: SDK 08.04: LWIP Ethernet Demos

Robin Bross

Dear Community,

we are currently investigating the update from SDK 08.03 to SDK 08.04.

Are there any hardware dependencies or additional steps required to run the LWIP ICSSG demo?
So far we haven't been able to ping the EVM which is running the LWIP ISCCG Demo.

Was this demo tested during the SDK release process?

With the SDK 08.03 we were able run these examples successfully.

Thank you for your support!

Best Regards
Robin

over 2 years ago

0 Nilabh Anand over 2 years ago

TI__Mastermind 35292 points

Hi Robin,

Thanks for your question.

Robin Bross said:
Was this demo tested during the SDK release process?

Yes the demo was tested during release process. We have verified it to be working.

To fasten up the debug process can you please share below info:

1. Is it a custom board or TI-EVM?

If yes Please follow https://software-dl.ti.com/mcu-plus-sdk/esd/AM243X/latest/exports/docs/api_guide_am243x/enet_migration_guide_top.html#CustomBoardSupport for adding phy driver to your custom board. Also for integrating your own phy please use this: https://software-dl.ti.com/mcu-plus-sdk/esd/AM243X/latest/exports/docs/api_guide_am243x/enet_migration_guide_top.html#ExternalPhyManagement

2. Can you share the logs if there are any errors.

Nilabh A.

0 Robin Bross over 2 years ago in reply to Nilabh Anand

Prodigy 233 points

We are using both, the EVM and a custom board.
The idea was to run the demo on the EVM first and port it to our custom board.

I will give it another try and come back to you, thanks for the help.

BR
Robin

0 Nilabh Anand over 2 years ago in reply to Robin Bross

TI__Mastermind 35292 points

Sure Robin,

Let me know if you face any issue.

Nilabh A.

Arm-based microcontrollers

Arm-based microcontrollers forum

MCU-PLUS-SDK-AM243X: SDK 08.04: LWIP Ethernet Demos